The FT991 only receives on VFO A, VFO B is only used for split Tx or
for exchanging with VFO A. There are no commands to set or query VFO B
mode. Added a set split mode function that saves VFO A mode and VFO b
frequency then sets the required VFO B mode into VFO A and then copies
VFO A to VFO B and restores the VFO B frequency and VFO A
mode. Bandwidth and narrow settings are not touched.
Several functins that had been implemented specifically for the FT991
have been removed because existing newcat.c functions were suitable or
there should not have been a function as the rig doesn't support it.
A small patch. Allows the FT-991 to work with Fake Split in WSJT-X.
FT-991 Rig Split does not work due to audio routing (at least not with
the USB port).
The 991 needs a delay after transmit is turned off and 50ms works.
73
Mike W9MDB
Attached fixes some problems with the Yaesu FT-991 exposed by recent
WSJT-x releases.
Made Yaesu newcat_get_cmd globally available.
Fixes a small bug in a debug print for frequency.
Adds a couple of TRACE debugs.
FT-991 now does split mode.
Tested and working on WSJT-X r5675 JT65/JT9 and WSPR mode.
73
Mike W9MDB