Mike Black W9MDB
d22e7d2f77
Update minlen debug to be accurate
...
https://github.com/Hamlib/Hamlib/issues/850
2021-11-25 10:31:44 -06:00
Mike Black W9MDB
ada6543b09
Update read_string to use a minimum-size read based on experience
...
https://github.com/Hamlib/Hamlib/issues/850
2021-11-24 15:48:11 -06:00
Mike Black W9MDB
d820ee9dbf
Add expected_len to read_string function for potential serial I/O speedup
...
https://github.com/Hamlib/Hamlib/issues/850
2021-11-24 13:02:39 -06:00
Mike Black W9MDB
9842cdb1f3
Some minor changes to serial.c as we progress to a faster method
...
https://github.com/Hamlib/Hamlib/issues/850
2021-11-02 11:17:19 -05:00
Mike Black W9MDB
8fe190d622
Reduce error messages about RIG_VFO_OTHER which only applies to some rigs like Icom rigs with the 0x25 command
...
Add a flush_flag to read_string so that the new serial_flush will not produce a timeout value when flushing
https://github.com/Hamlib/Hamlib/issues/835
2021-11-01 23:43:45 -05:00
Mike Black W9MDB
1ed398466d
Revert "Change serial_flush to read data instead of TCFLUSH"
...
Was causing timing problems
This reverts commit d28f440968
.
2021-10-29 14:38:40 -05:00
Mike Black W9MDB
d28f440968
Change serial_flush to read data instead of TCFLUSH
...
This is for the future to enable transceive mode on rigs
2021-10-29 11:24:16 -05:00
Mike Black W9MDB
d90d3eb0d0
Use EAGAIN error to retry when serial port is unavailable
...
https://github.com/Hamlib/Hamlib/issues/818
2021-10-10 08:33:31 -05:00
Mike Black W9MDB
4b77fc1eb3
Allow for EBUSY return during port read and retry 10x5ms for 50ms total before returning an error
...
https://github.com/Hamlib/Hamlib/issues/818
2021-10-08 23:58:07 -05:00
Mike Black W9MDB
9032e3e58b
Improve ser_open error message
2021-08-30 10:01:36 -05:00
Mike Black W9MDB
283281c4cb
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
Mike Black W9MDB
45d1162362
Improve debug message in iofunc.c on serial port error
2021-08-09 08:46:05 -05:00
Mike Black W9MDB
53476dd14d
Remove some more debug
2021-06-01 07:19:00 -05:00
Mike Black W9MDB
81e3e2e5d2
astyle files
2021-04-29 17:23:37 -05:00
Mike Black W9MDB
25eb70d90d
In iofunc.c only call hl_sleep if needed
2021-04-25 14:59:47 -05:00
Mike Black W9MDB
bbc8e00074
astyle files
2021-04-04 12:50:07 -05:00
Mike Black W9MDB
f6dc32778b
Reduce verbosity in iofunc.c
2021-03-29 13:01:26 -05:00
Michael Black W9MDB
6cc8e5a20f
Change LIBUSB definitions to cover both conditions
...
https://github.com/Hamlib/Hamlib/issues/634
2021-03-27 15:35:12 -05:00
Michael Black W9MDB
753cd792d3
Add debug to iofunc.c
...
https://github.com/Hamlib/Hamlib/issues/635
2021-03-27 15:17:52 -05:00
Michael Black W9MDB
ee60a68bec
astyle files
2021-02-28 09:46:01 -06:00
Michael Black W9MDB
83c47fad42
Android NDK now builds -- check README.android for info on libusb
...
https://github.com/Hamlib/Hamlib/issues/546
2021-02-28 15:50:36 +01:00
Michael Black W9MDB
7b04640cea
Fix read_string timeout display value
2021-01-28 12:22:52 -06:00
Michael Black W9MDB
6d51f65528
astyle files
2020-10-06 23:14:27 -05:00
Michael Black W9MDB
86949c4ef7
Remove debug
2020-10-02 23:00:53 -05:00
Michael Black W9MDB
293a844c41
Fix W command speed by using bytes requested correctly
...
read_string now recognizes binary strings to read 5X more bytes
Fixed Reply: prompt double output and space after :
https://github.com/Hamlib/Hamlib/issues/387
2020-10-02 17:23:48 -05:00
Michael Black W9MDB
7455fa1b91
Clean up compile warning on iofunc.c
2020-09-30 12:59:44 -05:00
Michael Black W9MDB
73d947213f
Reduce debug inj iofunc.c
2020-09-30 12:56:47 -05:00
Michael Black W9MDB
3c6ae62e59
Change get_kenwood_level to return both float 0-1.0 and raw value
...
Fix Elecraft K3/K3S/KX2/KX3 RF level get/set
Update other rigs for new get_kenwood_level call
https://github.com/Hamlib/Hamlib/issues/388
2020-09-30 12:46:54 -05:00
Daniele Forsi
d7b332c3f7
Fix spelling errors
...
Fixed using the following command:
codespell --write-changes --summary --skip=*.m4 --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
codespell --write-changes --summary --skip=aclocal.m4,lib --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
Codespell home page: https://github.com/codespell-project/codespell
2020-07-24 09:02:48 +02:00
mdblack98
d5d6c55439
Fix JTDSK compilation warnings
...
https://github.com/Hamlib/Hamlib/issues/233
2020-05-01 14:33:35 -05:00
mdblack98
d8fc515460
astyle iofunc.
2020-04-22 09:54:18 -05:00
mdblack98
ded8b6873d
Add debug to read_string
2020-04-22 09:53:37 -05:00
Michael Black
f1f0d7f129
Fix some of the documentation
2020-04-09 17:56:19 -05:00
Bill Somerville
e1e6969e9e
Simplify closing of device files
...
By treating PTT/DCD devices differently from rig control devices.
2020-01-26 19:06:27 +00:00
Bill Somerville
5edceddcea
Update i/o functions to support GPIO(N) port closure
2020-01-26 12:33:05 +00:00
Michael Black
7ee3a702f5
Replace all usleep with hl_usleep
...
Several places where usleep max value could be overflowed
New hl_usleep can take values > 1000000
2020-01-07 23:18:56 -06:00
Michael Black
fb73e5abd7
Fix some cppcheck warnings
...
Fix declarations after statements
Remove some !rig checks...we either don't need them or need them everywhere with a new error code
If you pass a NULL rig you get what you deserve :-)
2019-12-09 17:12:13 -06:00
Michael Black
1011ea16e4
Fix cppcheck warnings in iofunc.c
2019-12-08 16:56:14 -06:00
Michael Black
2f4d62709e
Added a dummy snprintf to rig_debug to allow gcc to check format strings
...
This found tons of errors in rig_debug statements
So this patch cleans up all the files that were producing warnings or errors
This should fix a few segfaults when running with debug turned on
2019-11-30 10:04:31 -06:00
Michael Black
8f93173462
Reduce verbosity of rig_strrmode and read_string
2019-02-05 09:31:54 -06:00
Michael Black W9MDB
aadd458b99
Ensure read_string value is terminated
2018-10-25 08:37:59 -05:00
Nate Bargmann
ab3e6bb5a5
Formatted src/ to final coding guidelines
2017-10-04 21:32:08 -05:00
c vw
028732bdfd
Changes to make microHam support compile under MinGW
2017-09-21 17:55:21 +02:00
c vw
d008ca6e5d
Microham support. Use "uh-rig" for rig_pathname to talk to the
...
microHam device for CAT. If you want hardware PTT via the microham
device, use DTR method and ptt_pathname "uh-ptt".
2017-09-10 19:56:59 -05:00
Nate Bargmann
f76b354588
Reformatted src directory
2017-08-09 06:14:31 -05:00
Bill Somerville
143f305b49
Further clarification in the implementation of kenwood_transaction()
...
Buffer size is now an input parameter only as the return data length
is implicit since a null terminated C string is returned. Better
precondition checks are impelmented.
2015-02-16 12:46:35 +00:00
Bill Somerville
82b8649030
Revert read_string() to partial results are a success status
...
The read_string() function was changed to return a -RIG_ETIMEOUT error
when timing out after having read some characters. This caused a back
end to fail because it was using a read_string() with an invalid stop
character and relying on the timed out read_string() to fetch the
data. This patch reverts to the prior behavior of returning a null
terminated buffer and read bytes count if at least one byte has been
read.
2014-12-10 01:25:33 +00:00
Bill Somerville
849f1e1bf8
Fix serial i/o on Windows.
...
Fix bytes read count accumulation in Windows serial I/O.
read_string from communications port doesn't handle timeout on
anything but the first character read.
Honour VMIN tty parameter correctly.
2014-11-30 11:22:58 +00:00
Andrew Errington
1a77ef9eb9
Initial support for CM108 GPIO contorl of PTT
...
Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
2012-01-11 06:16:51 -06:00
Stephane Fillod
da80137819
Add support for RIG_PORT_UDP_NETWORK
...
Also some copyright year update,
and default serial device on MacOSX
2012-01-06 09:28:24 +01:00