Mike Black W9MDB
6c43e5c6ac
Fix bogus "not supported" message when icom_set_mode_x26 is called
2021-10-16 23:29:05 -05:00
Mike Black W9MDB
83b7243946
Change icom_set_mode_with_data to reuse existing filter# if RIG_PASSBAND_NOCHANGE is requested
...
https://github.com/Hamlib/Hamlib/issues/827
2021-10-15 12:56:17 -05:00
Mike Black W9MDB
16a879bc72
Fix icom_set_mode_x26
...
https://github.com/Hamlib/Hamlib/issues/811
2021-10-13 16:02:40 -05:00
Mike Black W9MDB
6a4bebcb96
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2021-10-13 11:55:04 -05:00
Mike Black W9MDB
c7acbc19de
Improve Icom rigs with 1A 03 command and add some debug
...
https://github.com/Hamlib/Hamlib/issues/811
2021-10-13 11:53:45 -05:00
Christoph Berg
dfab74d74d
ic7610: Re-add send_morse
...
Commit 28b7543de6
mistakenly removed
send_morse from ic7610, add it back.
2021-10-12 21:55:18 +02:00
Mike Black W9MDB
d5a1b125cd
Fix frame.c
2021-10-10 17:17:30 -05:00
Mike Black W9MDB
7e6f948bf7
Undo frame.c commit -- misunderstood use
2021-10-10 17:12:07 -05:00
Mike Black W9MDB
75408098a4
Change Icom frame.c to only look for 0xfd for end of frame. Was not seeing error frames]
...
https://github.com/Hamlib/Hamlib/issues/818
2021-10-10 16:27:58 -05:00
Mike Black W9MDB
fecc7d42aa
Hopefully fixed auto_power_on for IC-7610 and IC-9700
...
But it takes ~4 seconds on IC-7300 to power on 14 seconds to time out when the rig does not respond at all
https://github.com/Hamlib/Hamlib/issues/815
2021-10-05 11:40:54 -05:00
Mike Black W9MDB
ca9a45c93e
Reduce icom auto_power_on timeout from 15 seconds to just over 5 seconds
...
https://github.com/Hamlib/Hamlib/issues/815
2021-10-04 17:34:09 -05:00
Mike Black W9MDB
068544eccb
Fix icom_set_mode_with_data to also set filter width
...
https://github.com/Hamlib/Hamlib/issues/811
2021-10-02 23:17:36 -05:00
Mike Black W9MDB
0018422d46
Add another check for icom_set_mode to skip if both mode and width are not changing
2021-10-02 22:59:19 -05:00
Mike Black W9MDB
eadd1da009
Fix IC7300 (and other Icoms) set/get_dsp_filter
...
All Icoms will now try the 1A 03 command once and if it is rejected won't try again.
https://github.com/Hamlib/Hamlib/issues/811
2021-10-02 17:33:21 -05:00
Mike Black W9MDB
a2b3a8d67e
Disable icom_get_vfo as user twiddling VFO knob does not work while polling
...
current_vfo is still determined at startup
https://github.com/Hamlib/Hamlib/issues/806
2021-09-29 05:46:53 -05:00
Mike Black W9MDB
8399b4b4dc
For Icom get_vfo make the same change as last commit for other Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/806
2021-09-28 14:06:50 -05:00
Mike Black W9MDB
3a76cb1b40
For Icom get_vfo when freqs are equal will only check vfo 1 time
...
This means get_vfo will not follow rig button pushes when freqs are equal
https://github.com/Hamlib/Hamlib/issues/806
2021-09-28 12:01:50 -05:00
Mike Black W9MDB
de5cb713f0
Align some more code
2021-09-26 23:45:26 -05:00
Mike Black W9MDB
9c272dd5f7
Align some code
2021-09-26 23:39:37 -05:00
Mike Black W9MDB
aae3ec4996
Allow IC-7300 and many other Icom rigs to find current vfo on startup
...
Icom rigs that do not have 0x25 or XCHG cannot do this yet which are older Icom rigs
XCHG rigs cannot get_vfo while transmitting but 0x25 rigs can
https://github.com/Hamlib/Hamlib/issues/806
2021-09-26 17:03:47 -05:00
AuroraRAS
782ad2a034
make the Android.mk files adapt to multi arch
2021-09-25 07:03:23 +08:00
Mike Black W9MDB
421c6e7c4e
Fix icom.c get_mode to not ask for unselected VFO when VFO_CURR is requested
...
https://github.com/Hamlib/Hamlib/issues/806
2021-09-22 10:40:56 -05:00
Mike Black W9MDB
a94dcddcf4
Fix ICOM request for VFOB info when VFOB is active vfo
...
https://github.com/Hamlib/Hamlib/issues/806
2021-09-21 12:17:17 -05:00
Mike Black W9MDB
912bfb4d5b
Promote IC781 to stable
2021-09-18 09:36:29 -05:00
Mike Black W9MDB
c2117ce140
Fix Xiegu spelling in x108g.c
2021-09-17 22:16:10 -05:00
Mike Black W9MDB
388294c3d6
Fix RIG_STATUS_STABLE misspelling
2021-09-15 13:50:31 -05:00
Mike Black W9MDB
8cc59cca3b
Rigs have been at BETA status forever so promoting all to STABLE
2021-09-15 13:44:42 -05:00
Mike Black W9MDB
c3f9f20aa8
Make var const in optoscan.c
2021-09-11 09:56:52 -05:00
Mike Black W9MDB
ecea9da847
Remove unused value set in icom.c
2021-09-11 09:54:19 -05:00
Mike Black W9MDB
ec2d5387a7
Remove shadowed declaration from icom.c
2021-09-11 09:53:17 -05:00
Mike Black W9MDB
02f0ae986f
Remove always true clause from icom.c
2021-09-11 09:48:36 -05:00
Mike Black W9MDB
a85d6891c7
Fix return path in icom.c
2021-09-11 05:43:19 -05:00
Mike Black W9MDB
6e5bc09b27
Fix potential buffer underflow in icom.c
2021-09-11 05:41:25 -05:00
Mike Black W9MDB
2706cca649
Fix potential buffer underflow in icom frame.c
2021-09-11 05:41:03 -05:00
Mike Black W9MDB
f2c60aa33a
Since Icom rigs default to filter 2 if a filter is not selected we will do the same when turning on data mode
...
https://github.com/Hamlib/Hamlib/issues/791
2021-09-07 17:52:44 -05:00
Mike Black W9MDB
e900b4f9dc
Change set_icom_set_mode_with_data to not change mode unless necessary
...
Should allow filters to stay where they are set if USB-D is the starting mode
https://github.com/Hamlib/Hamlib/issues/791
2021-09-07 17:44:57 -05:00
Mike Black W9MDB
acac64c116
Really fix icom_set_func so that it can also turn off DUAL_WATCH
2021-09-01 09:08:13 -05:00
Mike Black W9MDB
ee56688003
Fix icom_set_func so that it can also turn off DUAL_WATCH
...
In ic756.c remove ic756_set_func and use icom_set_func instead
2021-09-01 09:00:56 -05:00
Mike Black W9MDB
004efafda7
Remove unnecessary set_mode command from TARGETABLE_MODE Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-28 17:09:27 -05:00
Mike Black W9MDB
996dbbfa1a
Remove override of PKTUSB mode for Icom rigs -- don't think we need this
...
Was causing mode toggling on IC7300 during PTT transitions in JTDX
2021-08-28 10:21:16 -05:00
Mike Black W9MDB
06513a6869
Remove another unneeded vfo swap from icom rigs
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 17:24:31 -05:00
Mike Black W9MDB
283281c4cb
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
Wouter van Gulik
9aec383329
Simplify get_ant by having setting to unknown by default.
...
Drop setting to default in rigs.
Add some more documentation on get_ant.
2021-08-25 22:13:21 +02:00
Mike Black W9MDB
547bd0fb55
Fix ANT get/set for IC756Pro series
...
https://github.com/Hamlib/Hamlib/issues/774
2021-08-22 16:40:48 -05:00
Wouter van Gulik
83a8b98a86
icom.c: Drop width check. Other code assumes != NULL.
...
I am not sure if the intention was to check for width == default.
But that never worked, so for now do not change behaviour.
2021-08-21 20:36:10 +02:00
Mike Black W9MDB
014bc04ddf
Fix Icom rigs to use 0x25 command if capable
...
Fixes #1 and and #2 in the issue
https://github.com/Hamlib/Hamlib/issues/762
2021-08-13 07:42:39 -05:00
Mike Black W9MDB
4bfd71f91f
Fix Icom split and implement reverse split
...
These should work now from rigctl and via the API
S VFOB 1 VFOA
S Sub 1 Main
https://github.com/Hamlib/Hamlib/issues/754
2021-08-02 23:37:31 -05:00
Mike Black W9MDB
a092f1f630
Fix spelling error in icom.c
2021-07-19 22:58:19 -05:00
Mike Black W9MDB
756f8052fc
Minimize 0x25cmdfails resets to only when satmode changes
...
https://github.com/Hamlib/Hamlib/issues/741
2021-07-15 10:19:33 -05:00
Mike Black W9MDB
6bdb82bc54
Fix some vfo swapping issues for Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/734
2021-07-08 13:14:42 -05:00
Mike Black W9MDB
65c77953f8
Add MainA/B SubA/B to icom.c
...
https://github.com/Hamlib/Hamlib/issues/730
2021-07-05 17:04:24 -05:00
Mike Black W9MDB
dd0187ede6
Fix Icom rig 0x25 command for set mode with data and no width change
...
Fix Icom rigs not working with rigtctld and 0x25 command
https://github.com/Hamlib/Hamlib/issues/733
2021-07-03 22:16:33 -05:00
Mike Black W9MDB
763e18fa42
Fix get_mode_with_data for IC7800 as it can set but not read mode with 0x26 command
...
https://github.com/Hamlib/Hamlib/issues/725
2021-06-14 07:52:29 -05:00
Michael Black
9d7e1651b2
Merge pull request #719 from mikaelnousiainen/add-spectrum-data-for-dummy-rig
...
Add spectrum scope caps for dummy rig
2021-06-05 14:21:40 -05:00
Mikael Nousiainen
840333266f
Add spectrum scope caps for dummy rig. Fix duplicate definition for IC-785x.
2021-06-05 21:48:10 +03:00
Mike Black W9MDB
f41bcaa71a
Add IC-575 rig
2021-06-03 16:13:58 -05:00
Mike Black W9MDB
d9d562874d
Fix compilation warning in icom.c
2021-05-31 08:36:45 -05:00
Mikael Nousiainen
3a67356bc1
Add some comments and improved debugging on SIGIO async data handling
2021-05-31 16:22:22 +03:00
Mikael Nousiainen
263c16984a
Attempt to handle asynchronously pushed Icom CI-V frames (transceive and spectrum data) as these frame will get interleaved with command responses
2021-05-30 01:36:49 +03:00
Mikael Nousiainen
12527581b0
Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs.
2021-05-27 10:12:01 +03:00
Mikael Nousiainen
26ea916ca7
Implement Icom rig levels: SPECTRUM_EDGE_LOW and SPECTRUM_EDGE_HIGH
2021-05-27 01:09:01 +03:00
Mikael Nousiainen
b4ba22d369
Implemented initial abstraction for spectrum scope data and support for Icom spectrum data output. The abstraction is based on common features of both Icom and Kenwood rigs. Added TRANSCEIVE func and enumeration of supported AGC levels. Work in progress.
2021-05-26 23:40:53 +03:00
Mike Black W9MDB
ce470548b2
Promote IC821H to stable
2021-05-07 11:43:53 -05:00
Mike Black W9MDB
e84b8a3c99
Add special check for IC821H in icom_set_vfo
...
Seems the IC821H reverses Main/Sub logic when in satmode
Remove IC821 from riglist.h and icom.c -- not used
https://github.com/Hamlib/Hamlib/issues/693
2021-05-07 08:25:54 -05:00
Mike Black W9MDB
29013fd021
Add ic821h_set_split_vfo
...
https://github.com/Hamlib/Hamlib/issues/693
2021-05-06 23:59:00 -05:00
Mike Black W9MDB
2dd87806cf
Remove 3 second sleep from icom.c powerup
2021-04-30 15:59:43 -05:00
Mike Black W9MDB
81e3e2e5d2
astyle files
2021-04-29 17:23:37 -05:00
Mike Black W9MDB
9a82ebf652
Make icom.c 0x25 cmd check only try once
...
https://github.com/Hamlib/Hamlib/issues/685
2021-04-27 10:00:10 -05:00
Mike Black W9MDB
1d79b9e01c
Fix icom \get_mode in non-vfo mode to stay on VFOB/Sub
...
https://github.com/Hamlib/Hamlib/issues/676
2021-04-23 17:43:54 -05:00
Mike Black W9MDB
b0e006ce6c
astyle files
2021-04-21 23:48:29 -05:00
Mike Black W9MDB
870b9ca748
In icom.c add check for current vfo to avoid vfo swapping
...
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
2021-04-19 09:51:58 -05:00
Mike Black W9MDB
cd82a2c008
In icom.c fix reading VFOB width when 0 and set to VFOA width
...
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
2021-04-18 22:46:50 -05:00
Mike Black W9MDB
aefe8c44b7
In rig.c if rig does not set get_split_vfo then return cached values
...
https://github.com/Hamlib/Hamlib/issues/654
https://github.com/Hamlib/Hamlib/issues/665
2021-04-18 11:35:35 -05:00
Mike Black W9MDB
9cb7c7dcdf
Fix IC-705 filters in ic7300.c
...
https://github.com/Hamlib/Hamlib/issues/666
2021-04-15 07:05:38 -05:00
Mike Black W9MDB
4501c1c97b
Remove generated files
2021-04-14 15:41:01 -05:00
Mike Black W9MDB
9d310062eb
More files for git clone configure to work
2021-04-14 09:19:27 -05:00
Mike Black W9MDB
fe8677322e
Remove MAIN and SUB VFOs from ic7100.c -- rig doesn't have them
...
These have been in there for 8 years but just got exposed as a bug with new VFO handling
https://github.com/Hamlib/Hamlib/issues/660
Start changes to update rig->caps in netrigctl.c so "rigctl -m 2 u" matches "rigctl u"
https://github.com/Hamlib/Hamlib/issues/659
2021-04-14 07:11:28 -05:00
Mike Black W9MDB
7366522883
Remove SATMODE from ic7100.c -- rig does not have satellite mode commands
...
https://github.com/Hamlib/Hamlib/issues/660
2021-04-13 15:31:57 -05:00
Mike Black W9MDB
73464a6c2e
Fix IC910 behavior with gpredict -- also should fix some Main/Sub behavior elsewhere too
...
https://github.com/Hamlib/Hamlib/issues/657
2021-04-11 11:49:37 -05:00
Mike Black W9MDB
7ea4fd17aa
Fix icom.c default vfo to usa VFOA/Main as appropriate
...
https://github.com/Hamlib/Hamlib/issues/654
2021-04-08 22:37:36 -05:00
Michael Black W9MDB
b696391a66
Try another method of setting Icom default vfo
2021-03-30 15:40:17 -05:00
Michael Black W9MDB
b16eb6ac42
Force Icom rigs to MAIN_A on open
2021-03-30 14:48:41 -05:00
Michael Black W9MDB
ea269b224c
Fix vfo selection for Icom rigs when in split mode
...
https://github.com/Hamlib/Hamlib/issues/637
2021-03-30 14:43:57 -05:00
Michael Black W9MDB
fffaf27f87
Change icom.c to use Main instead of Main_A and Sub instead of Main_B
...
https://github.com/Hamlib/Hamlib/issues/637
2021-03-30 11:48:25 -05:00
Michael Black W9MDB
c831e32db1
Fix icom.c frequency offset when the 0x25 is attempted and fails
...
https://github.com/Hamlib/Hamlib/issues/629
2021-03-26 23:09:36 -05:00
Michael Black W9MDB
8b82e3f569
Add TARGETABLE_FREQ and TARGETABLE mode to IC705
...
https://github.com/Hamlib/Hamlib/issues/626
2021-03-26 14:41:38 -05:00
Michael Black W9MDB
dd156f74e2
astyle files in preparation for 4.2 release
2021-03-26 14:26:56 -05:00
Michael Black W9MDB
4135a65503
Add TARGETABLE_FREQ and TARGETABLE mode to IC7300 IC7610 IC7800 IC785X IC9700
...
This reduces VFO swapping during get_freq and get_mode operations
Log4OMV2 2.0.12 supports vfo mode using new get_vfo_info call
New debug level RIG_DEBUG_CACHE as it can get very verbose
https://github.com/Hamlib/Hamlib/issues/626
2021-03-26 10:54:11 -05:00
Michael Black W9MDB
eb952ad75f
In icom.c have set_vfo return RIG_OK immediately when VFO_CURR is requested
...
https://github.com/Hamlib/Hamlib/issues/625
2021-03-23 12:08:58 -05:00
Michael Black W9MDB
09474b17fb
Reset x25cmdfails when satmode is changed
2021-03-22 16:04:55 -05:00
Michael Black W9MDB
f0a82fa2bf
Fix icom.c vfo detection
...
https://github.com/Hamlib/Hamlib/issues/624
2021-03-22 07:54:46 -05:00
Michael Black W9MDB
80e199b302
Add satmode detection for Icom rigs like IC9700
...
In satmode VFOB/Sub now maps to SubA (2nd VFO)
https://github.com/Hamlib/Hamlib/issues/621
2021-03-20 08:07:16 -05:00
Michael Black W9MDB
950163f1a4
Rigs like IC9700 with MainA/B will have VFOA/Main mapped to MainA and VFOB/Sub mapped to MainB
...
No known use for SubA/SubB yet
https://github.com/Hamlib/Hamlib/issues/621
2021-03-19 23:36:33 -05:00
Michael Black W9MDB
c1277b170e
Fix Icom icom_get_usb_echo_off to read the freq response when echo is on
...
This takes into account whatever the response time of the rig is
https://github.com/Hamlib/Hamlib/issues/615
2021-03-18 22:46:45 -05:00
Michael Black W9MDB
ab59951e97
astyle files
2021-03-17 07:56:27 -05:00
Mikael Nousiainen
90112b5769
First attempt at fixing rigctl_parse return values and unnecessary rig re-open cycles
2021-03-16 23:39:35 +02:00
Michael Black W9MDB
27192d0c81
Fix potential seg faults in icom.c
...
https://github.com/Hamlib/Hamlib/issues/612
2021-03-16 12:45:30 -05:00
Michael Black W9MDB
0942553687
Fix icom_get_raw_buf
...
https://github.com/Hamlib/Hamlib/issues/612#issuecomment-800404923
2021-03-16 12:29:01 -05:00
Michael Black W9MDB
3bc39aaec1
astyle files is preparation for 4.2 release
2021-03-15 17:51:22 -05:00
Michael Black W9MDB
1ba72fa725
Improve caching
...
https://github.com/Hamlib/Hamlib/issues/280
https://github.com/Hamlib/Hamlib/issues/606
2021-03-15 11:16:11 -05:00
Michael Black W9MDB
d66e0b9807
Narrow the Icom NAK packet check to only 6 byte frames
...
https://github.com/Hamlib/Hamlib/issues/607
2021-03-14 16:43:17 -05:00
Michael Black W9MDB
dff7bdd7a7
For icom recognize bad command return packets e.g. fe fe e0 50 fa fd
...
https://github.com/Hamlib/Hamlib/issues/607
2021-03-13 08:03:53 -06:00
Michael Black W9MDB
ee6f682963
Remove unneed NAK check on wrong location -- NAK check already being done
...
https://www.dropbox.com/s/q0i90h7ee1w2tnf/bin.zip?dl=0
2021-03-12 12:26:10 -06:00
Michael Black W9MDB
6fcb7ccd37
Fixed icom ACK/NAK and frame responses
...
https://github.com/Hamlib/Hamlib/issues/600
2021-03-11 10:24:22 -06:00
Michael Black W9MDB
803a8d9e5e
Fix icom.c logic to not reject good answers
...
https://github.com/Hamlib/Hamlib/issues/596
2021-03-10 11:49:47 -06:00
Michael Black W9MDB
4d116d2f6c
Add 50ms pause in icom.c after set_freq and set_mode for possible transceive message which will then get flushed
2021-03-06 17:24:21 -06:00
Michael Black W9MDB
3d613519d5
Rename macros to avoid collisions with other software
2021-03-06 12:37:53 -06:00
Michael Black W9MDB
9a44b27775
astyle icom.c
2021-03-06 09:24:00 -06:00
Michael Black W9MDB
ef2e8a4d94
Change all icom calls to explicitly check for ACK/NAK
...
If neither is received a timeout error occurs so a retry will be done
Serial corruption was causing NAK rejects which was the wrong way to handle it
https://github.com/Hamlib/Hamlib/issues/587
2021-03-06 09:22:21 -06:00
Michael Black W9MDB
678f01d79d
Update debug in icom.c
2021-03-06 08:48:11 -06:00
Michael Black W9MDB
c3a1b489b7
Add return code to debug statements
...
Remove some RETURNFUNC that don't work with this change
2021-03-05 11:51:56 -06:00
Michael Black W9MDB
2c20b0afdb
After echo check to a get_freq in icom.c
...
Should fix poweron for Icom rigs that still echo in standby mode
https://github.com/Hamlib/Hamlib/issues/583
2021-03-05 07:32:01 -06:00
Michael Black W9MDB
662d56c384
Add RETURNFUNC to icom frame.c
...
https://github.com/Hamlib/Hamlib/issues/514
2021-03-04 12:39:02 -06:00
Michael Black W9MDB
247c90d4b0
Should fix icom power on
...
A little more cleanup to come
https://github.com/Hamlib/Hamlib/issues/583
2021-03-04 12:18:00 -06:00
Michael Black W9MDB
1473793f14
Change icom echo detection to a more robust solution.
...
https://github.com/Hamlib/Hamlib/issues/583
2021-03-04 11:01:23 -06:00
Michael Black W9MDB
3ca0313fb4
Implement RETURNFUNC in icom.c
...
https://github.com/Hamlib/Hamlib/issues/514
2021-03-03 16:57:03 -06:00
Michael Black W9MDB
221d87c2e4
Add auto_power_off option from JTDX team
...
Change rig_get_vfo_info to do real calls intstead of cache
2021-03-02 13:03:30 -06:00
Michael Black W9MDB
ee60a68bec
astyle files
2021-02-28 09:46:01 -06:00
Michael Black W9MDB
83c47fad42
Android NDK now builds -- check README.android for info on libusb
...
https://github.com/Hamlib/Hamlib/issues/546
2021-02-28 15:50:36 +01:00
Michael Black W9MDB
e5964fe670
Fix IC706 for 5 byte channels
...
https://github.com/Hamlib/Hamlib/issues/295
2021-02-23 23:16:00 -06:00
Michael Black W9MDB
0f9a7fac07
Add -RIG_EINVAL when set_level > 1.0
2021-02-19 08:44:02 -06:00
Michael Black W9MDB
1e9a991a25
Add set_dsp_flt for IC7000 -- any other Icom rigs can use this?
...
https://github.com/Hamlib/Hamlib/issues/521
2021-02-17 22:52:48 -06:00
Michael Black W9MDB
660fd94962
Change all icom rigs to watts for RIG_LEVEL_RFPOWER_METER_WATTS
...
Divide by 100 for old power call
2021-02-12 16:37:17 -06:00
Michael Black W9MDB
0e4bbf85d7
Add RIG_LEVEL_RFPOWERMETER_WATTS to ic7610.c
...
https://github.com/Hamlib/Hamlib/issues/533
2021-02-07 22:44:50 -06:00
Michael Black W9MDB
e589e078a1
Add 3 second sleep in icom powerstat to allow the rig to wake up
...
https://github.com/Hamlib/Hamlib/issues/525
2021-02-03 12:54:30 -06:00
Michael Black W9MDB
76f3099aef
Remove 500ms from icom/frame.c -- should not be needed
...
Reduce icom echo check to just 2 tries
Improves power up sequencing by about 7 seconds
https://github.com/Hamlib/Hamlib/issues/525
2021-02-03 11:45:57 -06:00
Michael Black W9MDB
cd7811f3ed
Fix icom_get_mode for rigs with 1-byte mode_len
...
https://github.com/Hamlib/Hamlib/issues/522
2021-01-29 16:32:16 -06:00
Michael Black W9MDB
e7b6e61ed0
astyle files prepping for 4.1 release
2021-01-22 10:41:30 -06:00
Michael Black W9MDB
599974bcea
Fix compilation error in icom.c
2021-01-20 22:54:37 -06:00
Michael Black W9MDB
5a9daf5f0e
Fix ic703 and ic705 RIG_LEVEL_RFPOWER_METER_WATTS to scale to 10W instead of 100W
2021-01-20 15:07:59 -06:00
Michael Black W9MDB
598b105e79
astyle files prepping for 4.1 release
2021-01-15 16:48:32 -06:00
Michael Black W9MDB
8024ffb937
Change icom_get_usb_echo_off to return TIMEOUT when it occurs instead of RIG_OK
...
https://github.com/Hamlib/Hamlib/issues/509
2021-01-13 12:42:03 -06:00
Michael Black W9MDB
6e8b90aeec
Fix cppcheck warnings
2021-01-09 15:19:19 -06:00
Michael Black W9MDB
ca8ed30f8f
astyle files
2021-01-09 10:13:17 -06:00
Michael Black W9MDB
cf858bfa3c
Change rig.c to return RIG_ENAVAIL instead of RIG_ENTARGET when set_vfo==NULL
...
Add IC706* to rigs that don't do dsp settings
Remove dynamic detection of transceive status in icom/frame.c
https://github.com/Hamlib/Hamlib/issues/490
2021-01-08 12:04:25 -06:00
Michael Black W9MDB
c426713a4b
Fix debug statement data types in icom/frame.c
2021-01-08 07:56:17 -06:00
Michael Black W9MDB
16d76eff4b
Add debug to icom/frame.c
...
https://github.com/Hamlib/Hamlib/issues/490
2021-01-07 15:50:50 -06:00
Michael Black W9MDB
02c0854434
In icom.c init() set priv->filter to RIG_PASSBAND_NOCHANGE to fix set_mode rigs with 2-byte cmds
...
https://github.com/Hamlib/Hamlib/issues/490
2021-01-06 17:04:44 -06:00
Michael Black W9MDB
98d9b535ef
Change max baud on ic7300 to 115,200
2020-12-29 10:01:02 -06:00
Michael Black W9MDB
3211e3aea1
astyle files
2020-12-21 23:50:29 -06:00
Steve Mobley
61956faeb3
Add bank select to IC-7100
2020-12-22 00:13:05 -05:00
Mikael Nousiainen
9e62b2783f
Fix RIG_PASSBAND_NOCHANGE use with Icom data modes. Allow selecting FIL2 as normal passband when in data mode. Add new Icom rigs to list that determines whether Icom data mode command supports setting filter too.
2020-12-21 18:15:15 +02:00
Michael Black W9MDB
2b1bce89bf
Fix icom default filter settings
...
https://github.com/Hamlib/Hamlib/issues/471
2020-12-19 14:30:31 -06:00
Michael Black W9MDB
263f1cde72
astyle files
2020-12-17 15:07:04 -06:00
Michael Black W9MDB
2a0deb3415
Add RIG_LEVEL_RFPOWER_METER_WATTS
...
Old level of 0-1 just doesn't work well with the varying power levels in rigs now
2020-12-16 17:47:49 -06:00
Michael Black W9MDB
9b98a264ab
Fix datamode set in icom.c to use 0x00 0x00 per the manual for 7300 and 9700
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-13 00:01:09 -06:00
Michael Black W9MDB
5883897656
icom.c passband nochange seems to be working
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 23:05:59 -06:00
Michael Black W9MDB
cdeacfb7d1
move icom.c icmode_ext setting a bit earlier in the code
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 15:38:42 -06:00
Michael Black W9MDB
ddb38db106
Set icom_set_mode to use existing filter for passband nochange
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 15:33:38 -06:00
Michael Black W9MDB
9bc98c9a2e
Add filter memory to frame.c for no passband change
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 13:22:49 -06:00
Michael Black W9MDB
7cd09fdd84
Fix passband nochange in icom frame.c
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 13:00:26 -06:00
Michael Black W9MDB
3061a5f8b2
Fix icom filter value, not ASCII!!!
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:40:04 -06:00
Michael Black W9MDB
0fa00cb14f
Missed icom.h commit
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:31:32 -06:00
Michael Black W9MDB
915666add2
Remember filter setting from icom_get_mode so we can refer to it later on set_mode
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:21:54 -06:00
Michael Black W9MDB
e4e88b833d
Eliminate warning in icom.c for passband nochange
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 11:24:07 -06:00
Michael Black W9MDB
f22d4a6dbe
Update icom.h version
2020-12-12 10:07:03 -06:00
Michael Black W9MDB
c0743dfe6e
astyle icom.c
2020-12-12 10:06:44 -06:00
Michael Black W9MDB
2ff3fa0782
icom now recognizes RIG_PASSBAND_NOCHANGE
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 10:06:00 -06:00
Michael Black W9MDB
5fc36df249
astyle files
2020-11-30 14:53:55 -06:00
Michael Black W9MDB
c70d841b83
Add NOCHANGE_PASSBAND to icom...cascading effect on adding vfo elsewhere...which is needed anyways
...
https://github.com/Hamlib/Hamlib/issues/448
2020-11-29 23:32:14 -06:00
Michael Black W9MDB
fbc44864b3
Promote IC-705 to stable
2020-11-21 23:09:11 -06:00
Michael Black W9MDB
20fc303686
Fix set_mode for IC-7000
...
https://github.com/Hamlib/Hamlib/issues/428
2020-11-03 15:24:06 +00:00
Michael Black W9MDB
51b4e0966c
Remove bad targetable code from rigs
...
https://github.com/Hamlib/Hamlib/issues/430
https://github.com/Hamlib/Hamlib/issues/414
2020-11-01 17:05:29 -06:00
Michael Black W9MDB
fd9e5d841b
Backing out targetable flags due to segfault on Linux
...
https://github.com/Hamlib/Hamlib/issues/431
2020-11-01 15:35:17 -06:00
Michael Black W9MDB
5721db70be
Added two more targetable flags for MEM and BANK to avoid VFO swapping
...
https://github.com/Hamlib/Hamlib/issues/430
https://github.com/Hamlib/Hamlib/issues/414
2020-11-01 07:48:52 -06:00
Michael Black W9MDB
74356b3a99
Add RIG_TARGETABLE_PTT and RIG_TARGETABLE_RITXIT
...
For most rigs these are non-vfo specific commands so we can avoid doing VFO switching
Add flags to all Yaesu, Icom, and Kenwood in rig_open
Some rigs do have VFO specific but it's already in the backend
More rigs can use these flags..TBD...
https://github.com/Hamlib/Hamlib/issues/430
2020-10-31 17:19:08 -05:00
Michael Black W9MDB
06cc95de56
WSJT-X is working with the IC-729 so promotint to stable
...
https://github.com/Hamlib/Hamlib/issues/429
2020-10-29 23:47:43 -05:00
Michael Black W9MDB
f55d50c7bc
Finish IC-729 addition
...
https://github.com/Hamlib/Hamlib/issues/429
2020-10-29 22:45:57 -05:00
Michael Black W9MDB
c8eaafb499
Add IC-729
...
https://github.com/Hamlib/Hamlib/issues/429
2020-10-29 22:30:34 -05:00
Michael Black W9MDB
378cbfb008
remove some cppcheck statements not needed anymore
2020-10-29 12:53:39 -05:00
Michael Black W9MDB
31b20c003c
Enhance ic7000 set bandwidth and prompt ic7000 to stable
...
https://github.com/Hamlib/Hamlib/issues/428
2020-10-29 08:17:40 -05:00
Michael Black W9MDB
b406c82c2d
Fix icom rig_wait_morse calls
...
https://github.com/Hamlib/Hamlib/issues/422
2020-10-19 11:25:17 -05:00
Michael Black W9MDB
ffeb3b44cf
Add wait_morse for icom rigs
...
https://github.com/Hamlib/Hamlib/issues/422
2020-10-18 14:16:44 -05:00
Michael Black W9MDB
0443afc794
Add wait_morse command with generit wait_morse_ptt function
...
This should work for any send_morse with full breakin
https://github.com/Hamlib/Hamlib/issues/422
2020-10-18 12:34:36 -05:00
Michael Black W9MDB
1e41f32017
Remove unused var from icom.c
2020-10-16 18:09:08 -05:00
Michael Black W9MDB
28b7543de6
Add stop_morse to Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/240
2020-10-16 17:26:02 -05:00
Mikael Nousiainen
a77e82be4e
Fix handling of Icom repeater shift and split command responses. Add tuning step definitions for IC-9700.
2020-10-14 18:19:00 +03:00
Michael Black W9MDB
0576a01ec2
astyle files
2020-10-01 22:51:31 -05:00
Michael Black W9MDB
7bee01f785
Add suppress for AST broken bug in cppcheck
2020-09-19 16:09:44 -05:00
Michael Black W9MDB
88291fed86
Clean up cppcheck scope
2020-09-19 14:31:54 -05:00
Mikael Nousiainen
499d17cd20
Fix errors in Icom extcmd definitions and handling. Migrate more commands on Icom rigs to use extcmds. Add extfuncs to dummy rig for testing.
2020-09-16 22:33:39 +03:00
Mikael Nousiainen
23971f8e75
Fix issues with Icom extcmds definitions, some ext_tokens missing. Refactor custom level implementations to use extcmds definitions. Print out extfuncs in caps dump.
2020-09-16 18:10:35 +03:00
Michael Black W9MDB
b97d05369c
astyle files
2020-09-14 23:12:35 -05:00
Michael Black W9MDB
6267d2674e
Fix icom LEVELs
2020-09-14 14:45:36 -07:00
Michael Black W9MDB
ebddade1dc
Fix debug statement in ic7300.c
2020-09-14 14:34:52 -07:00
Michael Black W9MDB
9c5b7499f6
Fix IC7300 set_parm PARM_TIME
2020-09-14 09:18:43 -07:00
Michael Black W9MDB
15a879d5ea
Add ic7300_get_parm and ic7300_set_parm
2020-09-14 11:08:38 -05:00
Michael Black W9MDB
1c5c44edd2
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2020-09-14 08:02:52 -05:00
Michael Black W9MDB
52764221ca
Make ic75 parm functions static
2020-09-14 08:02:42 -05:00
Michael Black W9MDB
f41e07c0e6
Remove rptr functions from ic7300.c
...
https://github.com/Hamlib/Hamlib/issues/373
2020-09-14 07:34:02 -05:00
Michael Black W9MDB
aeaa96bc3b
Fix icom_get_parm to eliminate collisions
2020-09-12 21:37:10 -07:00
Michael Black W9MDB
6e45a7ba78
Fix ic7300 VOXDELAY and other extcmd structures
2020-09-12 14:26:57 -07:00
Michael Black W9MDB
83667f4c65
Added CMD_PARAM_TYPE values for icom rigs to distinguish the different ext cmd types
...
https://github.com/Hamlib/Hamlib/issues/373
2020-09-12 11:21:33 -05:00
Michael Black W9MDB
03ad7a953f
Update codeql
2020-09-11 22:44:35 -05:00
Michael Black W9MDB
54c522ef99
Start of migrating Icom rigs to separate LEVEL and PARM values to avoid collisions
...
https://github.com/Hamlib/Hamlib/issues/373
2020-09-11 09:49:47 -05:00
Michael Black W9MDB
2020f29185
Remove redundant RIG_LEVEL_BRIGHT
2020-09-10 10:07:11 -05:00
Michael Black W9MDB
6d74501d2c
Fix ic7300 ranges
2020-09-07 09:22:28 -05:00
Michael Black W9MDB
b7c3aa3ad1
Fix range_list for ic7300
2020-09-07 08:17:20 -05:00
Michael Black W9MDB
24fb47cbe0
Added IC-705
...
Added RIG_LEVEL_BRIGHT -- IC705 has this level
Fixed range printout
https://github.com/Hamlib/Hamlib/issues/364
2020-09-06 12:28:35 -05:00
Michael Black W9MDB
fade1681fa
Fix cppcheck errors and warnings
2020-09-02 16:56:11 -05:00