mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
11 599 Commity
57 Gałęzie
31 Tagi
46 MiB
Wykres commitów

3395 Commity (58924b7bec47a73ee4665030be78b83a530b45c0)

Autor SHA1 Wiadomość Data
Michael Black W9MDB 58924b7bec Add DATA_FMN mode to flrig 2024-12-04 15:43:47 -06:00
Michael Black W9MDB 671a3b8562 Fix rig_get_DBM in flrig 2024-12-04 14:47:48 -06:00
Michael Black W9MDB 46711b1db4 Fix FLRig STRENGTH reading to use rig.get_DBM instead of rig.get_smeter -- much better representation 2024-12-04 10:00:41 -06:00
Michael Black W9MDB 8f0e9909da astyle icom.h and update icom date 2024-12-03 15:32:08 -06:00
Michael Black W9MDB 3e0a9eeae7 Fix icom filter selection and bandwidth limits 2024-12-03 15:31:16 -06:00
Michael Black cf61b9a178
Merge branch 'master' into fix24 2024-12-03 06:57:15 -06:00
Thomas Beierlein 5582348978 Drop addional unwanted space after message 
Kenwood_send_morse adds an unwanted space after each transmission on
TS-590S model (see issue 1634).

Tests showed that all space before any message gets ignored and all
trailing spaces (if any) were compressed to exactly one space.

The patch changes the alignment to the right.
 2024-12-03 12:45:15 +01:00
George Baltz N3GB 806b087293 Fix porting unneeded code 2024-12-03 05:06:10 -05:00
George Baltz N3GB bdbe66dfa0 Use short (i.e., variable length) messages in kenwood_send_morse() 
Enabled for TS-890S & TS-990S(if firmware capable)
Kludge the kludges in kenwood_transaction() for KY->KY2 change.
 2024-12-02 13:11:20 -05:00
Daniele Forsi IU5HKX e480bc7479 Fix typos 2024-12-01 21:59:11 +01:00
Michael Black W9MDB ab2b5fb9e9 Fix IC7760 civ address 2024-11-27 12:30:27 -06:00
Michael Black W9MDB dc7bbeca34 Fix civ address for IC7760 2024-11-27 12:28:59 -06:00
Michael Black W9MDB d86f0db383 Fix 10GHz power watts for IC9700 2024-11-27 12:10:48 -06:00
Michael Black W9MDB 3f90a9323e Update POWER_METER values for IC7700 and IC7760 2024-11-27 12:07:03 -06:00
Michael Black W9MDB 610581ca95 Some updates to IC7760 2024-11-27 10:47:34 -06:00
Michael Black W9MDB 8ee3c9fa64 Add ic7760.c 2024-11-26 23:44:45 -06:00
Michael Black W9MDB a94e2948f5 Add IC7760 Alpha 2024-11-26 23:38:19 -06:00
Mike Black W9MDB fbdb665620 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2024-11-24 22:30:38 -06:00
Daniele Forsi IU5HKX 6adfce0305 Fix typos in messages 2024-11-24 19:24:35 +01:00
Daniele Forsi IU5HKX 6036a65d2e Fix typos in comments 2024-11-24 19:24:35 +01:00
Mike Black W9MDB 4811ebe3bc Merge branch 'master' of https://github.com/Hamlib/Hamlib 2024-11-22 17:17:13 -06:00
Mike Black W9MDB 5b277e4600 Improve error message for FT900 when invalid mode requested 2024-11-22 17:16:48 -06:00
George Baltz N3GB 11acef5d3b MACROize new code. 2024-11-21 19:21:41 -05:00
George Baltz N3GB c080ba7b82 Factor out TS-890S and TS-990S from kenwood_get_split_vfo_if() 
Fix TS-890S to return correct VFO
More of issue #1380
 2024-11-21 16:43:19 -05:00
George Baltz N3GB 238344b0ce Update TS-890S and TS-990S RIT/XIT handling 
Use dedicated commands that make setting much simpler.
Replaces usage of deprecated IF command.
See issue #1380
 2024-11-21 16:43:19 -05:00
Mike Black W9MDB d640511b20 astyle icom.c 2024-11-21 11:06:52 -06:00
Mike Black W9MDB 3f52611709 Fix IC9700 WATTS measurement when freq > 1GHz 2024-11-21 11:06:21 -06:00
Mike Black W9MDB 48aa284152 Ensure tuner is off for FTDX101D/MP for 70cm band -- bug in firmware leaves it on which can cause damage 2024-11-18 17:26:10 -06:00
Mike Black W9MDB eafdf89705 Fix for FT817 when rig is manually set to non-dig mode and WSJTX then tries digmode 
Memory was not reflecing non-digmode when FM was selected so we now check to see if mode is changing
 2024-11-17 16:54:05 -06:00
Mike Black W9MDB b86822064a Change all Flex-radio to FlexRadio 2024-11-14 16:24:39 -06:00
Mike Black W9MDB 06bd1fe3e1 Fix ft817.c DIG/PKT modes 
https://github.com/Hamlib/Hamlib/issues/1629
 2024-11-12 16:07:45 -06:00
Mike Black W9MDB fbcd0f1667 Update async detection in icom.c 2024-11-11 17:20:53 -06:00
Mike Black W9MDB 320daa975a Ignore icom fe fe 01 packets 2024-11-11 17:14:56 -06:00
Mike Black W9MDB 22c0001320 Another IC-PW2 change 2024-11-11 17:01:11 -06:00
Mike Black W9MDB 3bd462308c Another IC-PW2 try 2024-11-11 16:55:12 -06:00
Mike Black W9MDB 356776f4bf Another fix for IC-PW2 2024-11-11 16:48:54 -06:00
Mike Black W9MDB 27643a9a0e Another fix for IC-PW2 2024-11-11 16:32:04 -06:00
Mike Black W9MDB 7a98365c15 Other file for IC-PW2 fix 2024-11-11 16:27:20 -06:00
Mike Black W9MDB 473a77406e Fix for async packet from IC-PW2 amplifier 2024-11-11 16:26:15 -06:00
Mike Black W9MDB c22392e5cd Update FLRig's model name with the connected rig in FLRig 2024-11-10 09:53:35 -06:00
Mike Black W9MDB 32e6b90f4a Change FT817/FT818/Q900 to use 0x0a for digital mode and 0x0c for packet instead of 0x07 2024-11-09 07:02:04 -06:00
Mike Black W9MDB 6dcd60c2ac Increate FT747GX post_write_delay from 5ms to 10ms 
Doing two commands at once via rigctld needed a little extra delay
 2024-11-08 22:29:29 -06:00
Mike Black W9MDB 84b733d028 Add RIG_OP_TUNE for TS990S 2024-11-07 08:12:46 -06:00
Mike Black W9MDB 5c269964c2 astyle files in preparation for release 4.6 2024-11-06 08:07:34 -06:00
Mike Black W9MDB 7f8f7a0e58 Undo change to ft1000mp.c -- caching was not needed as it is only 16 bytes returned 2024-11-05 17:04:39 -06:00
Mike Black W9MDB 5a9deee7d0 Had FT817 round down instead of nearest 
Hope this fixes frequency walking in gpredict
 2024-11-04 16:40:48 -06:00
Mike Black W9MDB 49e870cfb8 Remove collision_retry=0 in icom/frame.c -- was causing a loop when random data received 
https://github.com/Hamlib/Hamlib/issues/1604
 2024-10-30 16:41:29 -05:00
Mike Black W9MDB 5b1df09ad0 Fix segfault in icom.c when range_list is NULL 2024-10-30 08:21:37 -05:00
Mike Black W9MDB 65ae338454 Add NR2 via "u NR 2" for TS480, TS590S/SG, and QrpLabs QMX 
https://github.com/Hamlib/Hamlib/issues/1625
 2024-10-27 17:47:32 -05:00
Mike Black W9MDB aa6d028b73 Promote IC2730 to stable 2024-10-26 09:49:39 -05:00