Mike Black W9MDB
56de3bb25d
Fix FTDX10 SM command
2023-08-02 16:13:55 -05:00
Mike Black W9MDB
942e4cd950
Fix get_level AF for FTDX10
2023-08-02 16:09:32 -05:00
Mike Black W9MDB
232d7626cc
Yaesu rigs (at least some of them cannot use MG command when in RTTY or CW mode
...
So we return RIG_OK for set which just ignores it and level=0 in this case
2023-08-02 16:01:10 -05:00
Mike Black W9MDB
2709be053c
Fix new.cat EX030109 command
2023-08-02 15:25:44 -05:00
Mike Black W9MDB
801d34e3fb
Fix reverse split for Yaeus VFO_SUB rigs
...
https://github.com/Hamlib/Hamlib/issues/1103
2023-07-31 15:31:06 -05:00
George Baltz N3GB
2ccac887d2
New for old - update level_gran for ft9000Old
2023-07-27 16:29:33 -04:00
George Baltz N3GB
2f3c632ff6
Convert ANTIVOX & VOXGAIN
2023-07-27 15:01:55 -04:00
George Baltz N3GB
bb260d2640
Convert COMP
2023-07-26 16:58:26 -04:00
George Baltz N3GB
d1106cae8b
Convert MICGAIN to level_gran
...
Update rig info
Round to nearest integer
2023-07-26 16:58:26 -04:00
George Baltz N3GB
a975a6e8a6
Convert set/get AF, RF to use level_gran info.
2023-07-26 16:58:26 -04:00
George Baltz N3GB
ee5b96443f
Add basis for level_gran use in newcat.c
...
Do the easy one - CWPITCH
2023-07-26 16:58:26 -04:00
Mike Black W9MDB
802892887a
Remove get_vfo from FT9000Old
2023-07-25 06:35:59 -05:00
Mike Black W9MDB
bbdd1dc312
Add new rig FT9000Old version that does not have VS command
2023-07-24 22:41:00 -05:00
Mike Black W9MDB
d8d716f0f2
Fix h command for newer Yaesu rigs -- now reads channel correctly.
...
https://github.com/Hamlib/Hamlib/issues/1342
2023-07-21 10:16:25 -05:00
Mike Black W9MDB
aacf060e11
Remove set_vfo B in ft100 set_ptt as WJST-X was getting confused about being in reverse split
2023-07-20 16:59:57 -05:00
Michael Black
daa86f5b7a
Merge pull request #1339 from mikaelnousiainen/ft710-fixes
...
Improve Yaesu FT-710 backend
2023-07-18 15:45:37 -05:00
Mikael Nousiainen
d0fba93c65
Bump version for FT-710
2023-07-18 23:32:36 +03:00
Mikael Nousiainen
ebc10b84f4
Fix more FT-710 issues and implement the new CF clarifier command
2023-07-18 23:31:15 +03:00
Mike Black W9MDB
e167d0f1a0
Fix FT-991 poweron routine
2023-07-16 15:08:33 -05:00
Mikael Nousiainen
c1829e3de0
Add ft710.h
2023-07-12 00:36:49 +03:00
Mikael Nousiainen
d54912e375
FT-710 fixes, part 1
2023-07-12 00:29:32 +03:00
Mike Black W9MDB
84048e3e94
Fix newcat.c TX validation
2023-07-11 10:11:13 -05:00
Mike Black W9MDB
2ff99809f1
Remove validation from BD/BU commands in newcat.c
...
https://github.com/Hamlib/Hamlib/issues/1331
2023-07-10 17:26:45 -05:00
Mike Black W9MDB
ad1e63efa1
Fix FT-991 Fake It failing to retrun to receive frequency
...
Yaesu rigs will no return from set_ptt until TX0 is achieved
Restrict 300ms wait just to FTDX3000 due to antenna switching
This speeds up set_ptt off for other Yaeus rigs
https://github.com/Hamlib/Hamlib/issues/1326
2023-07-02 17:50:38 -05:00
Mike Black W9MDB
203920e293
FIx FT817 set/get_mode -- thanks to Mooner Salem K6AQ
...
https://github.com/drowe67/freedv-gui/issues/409
2023-06-07 07:05:05 -05:00
Mike Black W9MDB
835b66e7df
Give the FT-920 some time during PTT OFF to allow it to occur
...
Fake-It was not working probably due to this as can't set freq while PTT
2023-06-06 23:34:15 -05:00
Mike Black W9MDB
72071a313e
Fix FT817 get_mode
...
https://github.com/Hamlib/Hamlib/issues/1308
2023-06-06 14:22:28 -05:00
Mike Black W9MDB
e8af3447aa
Fix ft817.c build for MacOS and Pi
...
https://github.com/Hamlib/Hamlib/issues/1308
2023-06-06 08:36:50 -05:00
Mike Black W9MDB
5276e25a92
FIx from Brian G8SEZ for FT817 get_mode
...
And another fix for returning the correct mode hopefully for DIG modes
https://github.com/Hamlib/Hamlib/issues/1308
2023-06-06 08:14:37 -05:00
Mike Black W9MDB
acc42665ef
Allow FT817 to write to EEPROM for set_mode
...
Should not cause too much wear on the EEPROM
https://github.com/Hamlib/Hamlib/issues/1308
2023-06-05 08:34:59 -05:00
Mike Black W9MDB
e1e570d19a
Add documentaion for FT-817
2023-06-04 07:56:10 -05:00
Mike Black W9MDB
48b01aa3ff
Add RIG_MODE_PKTLSB to FT817 even though it must be switched using Menu 26
...
Add a warning message to notify the user
https://github.com/Hamlib/Hamlib/issues/1308
2023-06-04 07:18:00 -05:00
Mike Black W9MDB
a6de41e206
rigctld can now see RIG_LEVEL values correctly
...
https://github.com/Hamlib/Hamlib/issues/1305
2023-06-03 16:50:30 -05:00
Mike Black W9MDB
2491d208d9
Fix FT450 and FT991 RIG_LEVEL_NR values
...
https://github.com/Hamlib/Hamlib/issues/1305
2023-06-02 15:16:38 -05:00
Mike Black W9MDB
cd0b685ed2
Change FT450 and FT991 RIG_LEVEL_NR back
...
https://github.com/Hamlib/Hamlib/issues/1305
2023-06-02 10:25:05 -05:00
Mike Black W9MDB
82954c0549
Change Yaeus sleep afer PTT off to 300ms instead of 100ms
...
DX3000 was failing frequency change in Fake It mode probably due to antenna switching times
This was a separate rx/tx antennas
2023-05-31 08:36:55 -05:00
Mike Black W9MDB
fe209d7cce
Fix Yaeus LVL_NR to default 1-15 range and set FT450 to 1-11 ranges
...
https://github.com/Hamlib/Hamlib/issues/1305
2023-05-31 07:55:50 -05:00
Mike Black W9MDB
81dd39319b
Clean up startup messages in newcat.c when power is off
2023-05-26 12:19:50 -05:00
Mike Black W9MDB
8d465a257e
Fix a couple more debug statements
2023-05-26 10:53:32 -05:00
Mike Black W9MDB
06f5d8376f
Fix debug message eol
2023-05-26 10:52:04 -05:00
Michael Black
f01a165ec7
Merge pull request #1302 from mikaelnousiainen/power-status-bug-fixes
...
Power status bug fixes
2023-05-26 10:47:35 -05:00
Mikael Nousiainen
fd68723da1
Fix issues with power status handling in rigctl+rigctld and the Yaesu backend
2023-05-26 18:03:20 +03:00
Mike Black W9MDB
79492d4284
Put enter/leave CAT in FT767GX.c again and reduce write_delay to zero.
...
Hopefully speeds things up and still works but may need to tweak write_delay
https://github.com/Hamlib/Hamlib/issues/1300
2023-05-23 10:11:51 -05:00
Mike Black W9MDB
083669dbc8
Hopefully speed up FT767GX considerably
...
https://github.com/Hamlib/Hamlib/issues/1300
2023-05-22 11:25:57 -05:00
Mikael Nousiainen
9e1adcfdb8
Merge master and fix conflicts
2023-05-21 23:11:26 +03:00
Mikael Nousiainen
cce66d3257
Fix power on/off bugs: rig_open() should succeed even if rig is powered off, auto power-on should not be automatically enabled (prevents turning rig off), fix Kenwood and Yaesu power on/off sequences for all rigs
2023-05-21 23:01:03 +03:00
George Baltz N3GB
05f04730d7
Round 3 of level_gran updates.
2023-05-20 11:13:16 -04:00
Mike Black W9MDB
44c9f83ae0
Improve power on sequencing for Yaesu rigs
...
https://github.com/Hamlib/Hamlib/issues/1282
2023-05-17 17:26:53 -05:00
Mike Black W9MDB
630f5866a7
Completely remove single ; valcmd in newcat.c
2023-05-16 17:16:28 -05:00
Mike Black W9MDB
bba58dff7b
Revert newcat.c valcmd to ID; as single ; was causing timeouts on FT-991 and possibly others
...
Using ; required a 100ms sleep after receiving the ?; response and that sleep can be removed when using ID;
22ms time vs 135ms time to set freq on FT-991 now
2023-05-16 17:04:09 -05:00