Mike Black W9MDB
e887152407
Fix parm_gran
...
https://github.com/Hamlib/Hamlib/issues/1357
2023-08-17 16:04:45 -05:00
Mike Black W9MDB
2852fba73f
Increase sleep during power on for Icom to wait for serial port to wake up
2023-07-29 15:10:36 -05:00
Mike Black W9MDB
bd1fcbe025
Adjust icom power up to use the mininum number of 0xfe's needed for the baud rate
2023-07-28 17:32:23 -05:00
Mike Black W9MDB
fcba1cab20
Make icom echo check skip the 1st two bytes of the frame
...
Saw an instance where the 1st 0xfe was corrupted so this allows for that
2023-07-24 17:35:14 -05:00
Mike Black W9MDB
b58c0a0fa4
IC-9700 VFO selection now works for VFOA, VFOB, MainA, MainB, SubA, and SubB
...
WSJT-X does not set VFOB mode when VFOA mode is already selected...must change VFOA mode and back again to set VFOB
2023-07-18 10:20:53 -05:00
Mike Black W9MDB
902cfd708f
Improve Icom set_powerstat=1
...
Original 2023-07-16T09:28:43.323319-0600: 4:rig_set_powerstat: elapsed=10236ms
IC-7300 2023-07-16T09:46:48.814844-0600: 4:rig_set_powerstat: elapsed=4020ms
IC-9700 2023-07-16T10:36:27.239828-0600: 4:rig_set_powerstat: elapsed=5717ms
The goal is to tweak each rig for fastest result but need more testers for that
Slowest right now is IC-9700 which is the default value
Total timeout will be just over 10.5 seconds to allow rig to power on
https://github.com/Hamlib/Hamlib/issues/1325
2023-07-16 10:38:59 -05:00
Mike Black W9MDB
3cc6b7614c
Fix IC7610 caps structure for new firmware test
2023-07-07 11:47:59 -05:00
Mike Black W9MDB
a3ac6e0be3
Change to using RIG_IS macros
...
Fix segfault on non 76XX rigs
https://github.com/Hamlib/Hamlib/issues/1319
2023-06-27 11:24:27 -05:00
Mike Black W9MDB
c0c70b0146
Fix IC-7600 set/get freq to use new 0x25/x26 capability if available
...
https://github.com/Hamlib/Hamlib/issues/1319
2023-06-27 08:54:43 -05:00
Mike Black W9MDB
701aaab1c6
Ensure usb echo off is determined first thing for Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/1318
2023-06-20 09:32:10 -05:00
Mike Black W9MDB
f14c241f43
Fix IC-905 frequency -- needed to be 10Hz units
2023-06-16 22:32:13 -05:00
Mike Black W9MDB
88a1d88e0f
Fix icom.c set_mode_with_data to skip mode if same and skip bandwidth if same or nochange
...
https://github.com/Hamlib/Hamlib/issues/1312
2023-06-09 17:06:46 -05:00
Mike Black W9MDB
21f0e560f7
For Icom rigs when PASSBAND_NOCHANGE is requested do not change the filter setting
...
https://github.com/Hamlib/Hamlib/issues/1309
2023-06-06 09:44:25 -05:00
Mike Black W9MDB
5745457d7f
Fix anytone thread deletion
2023-05-30 22:10:19 -05:00
Mike Black W9MDB
6eb0735c75
Update Icom rigs that cannot query power status
2023-05-20 22:22:02 -05:00
Mike Black W9MDB
04ee4ec580
Fix IC7800 to use get_freq instead of 0x18 command since it cannot read power status
2023-05-18 11:40:43 -05:00
Mike Black W9MDB
474428082d
Add rig_get_vfo for IC9700 -- seems we can use x07 0Xd2 to determine main/sub vfo now
2023-05-17 14:03:08 -05:00
Mike Black W9MDB
c7cfc78303
Add IC7700 to rigs that don't have 0x25
2023-05-12 14:36:40 -05:00
Mike Black W9MDB
e9cc1881dc
Fix x25cmdfails detection in icom.c
...
https://github.com/Hamlib/Hamlib/issues/1277#issuecomment-1542655090
2023-05-10 14:42:22 -05:00
Mike Black W9MDB
247f0f72cf
Excludes IC9100 from updating x25cmdfails from satmode
...
The IC9100 never supports 0x25
https://github.com/Hamlib/Hamlib/issues/1284
2023-05-08 10:30:24 -05:00
Mike Black W9MDB
4a8a82ffc4
Fix icom.c 0x25 detection and add IC9100 to known rigs that doesn't have 0x25
...
https://github.com/Hamlib/Hamlib/issues/1284
2023-05-05 09:38:07 -05:00
Mike Black W9MDB
d044ad998c
Add retry to icom_get_ptt
...
https://github.com/Hamlib/Hamlib/issues/1283
2023-05-03 16:18:02 -05:00
Mike Black W9MDB
e82f127965
Allow icom read_frame to return when bus collision occurs
...
https://github.com/Hamlib/Hamlib/issues/1280
2023-04-26 15:38:08 -05:00
Mike Black W9MDB
6fadbfb112
Change Icom 0x25 logic to only allow one detection
...
https://github.com/Hamlib/Hamlib/issues/1277
2023-04-25 08:00:43 -05:00
Daniele Forsi IU5HKX
2e894dd9cc
[icom] Remove unused include of config.h
...
Found wih "Include What You Use".
2023-02-14 19:21:18 +01:00
Mike Black W9MDB
d16b52e414
Fix IC7300 5 second sleep during poweron
...
Reverse ID-5100 logic for dual watch mode
https://github.com/Hamlib/Hamlib/issues/1220
2023-01-22 10:49:15 -06:00
Mike Black W9MDB
0c2426c800
Add 5 second sleep during power on for IC7300
...
https://github.com/Hamlib/Hamlib/issues/1220
2023-01-21 17:21:04 -06:00
Mike Black W9MDB
9d096c4ac9
Improve powerstat on/off behavior for Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/1212
2023-01-18 15:00:18 -06:00
Mike Black W9MDB
9861d1f87b
Add dual watch capability for ID-5100
...
https://github.com/Hamlib/Hamlib/issues/1218
2023-01-18 08:49:11 -06:00
Mike Black W9MDB
dc131cba7f
Fix set_powerstat on/off/on for Icom rigs using rigctld power_on=0
...
https://github.com/Hamlib/Hamlib/issues/1212
2023-01-10 08:46:10 -06:00
Mike Black W9MDB
89fadca3bd
For Icom rigs close and reopen rig after set_powerstat=1 -- Linux resets the usb device
...
https://github.com/Hamlib/Hamlib/issues/1212
2023-01-09 09:50:25 -06:00
Mike Black W9MDB
138795668f
Fix ID5100 get/set_mode
...
Remove ID rigs freq_len check as civ_731 setting should cover it
https://github.com/Hamlib/Hamlib/issues/1204
2023-01-04 06:57:12 -06:00
Mike Black W9MDB
1b6b78f54a
Another attempt to fix get/set freq for ID5100 ID4100 ID31 ID51
...
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
2023-01-03 12:17:16 -06:00
Mike Black W9MDB
c7b33ef0b3
Fix ID5100 ID4100 ID31 ID51 get/set freq
...
Remove get_powerstat from ID4100 ID31 ID51 as it they are not capable
Add new rig_is_model function to help with Icom rig identification checks
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
2023-01-02 11:30:52 -06:00
Mike Black W9MDB
1ef3549e94
Fix rigctld showing the real rig agc_levels instead of all levels
...
Fix display of RIG_AGC_OFF
Add RIG_AGC_LONG
Fix PowerSDR AGC values
https://github.com/Hamlib/Hamlib/issues/1155
2022-11-23 23:29:18 -06:00
Mike Black W9MDB
e3a1d8c96c
Update icom.h data
...
https://github.com/Hamlib/Hamlib/issues/1154
2022-11-20 11:42:45 -06:00
Mike Black W9MDB
4f5bf9aadd
Fix some dumpcaps warnings in many rigs
2022-11-14 16:02:28 -06:00
Mike Black W9MDB
c218996e2f
Add RIG_FUNC_OVF_STATUS for IC-7300, IC-9700, IC-705, IC-R8600
2022-11-04 23:31:51 -05:00
Mike Black W9MDB
224ccc7839
Fix filter set for IC375 and promote to stable
...
https://github.com/Hamlib/Hamlib/issues/1113
2022-09-09 14:01:43 -05:00
Mike Black W9MDB
9cb511af00
Add some debug for Icom use_cached variables
...
https://github.com/Hamlib/Hamlib/issues/1108
2022-09-05 12:21:45 -05:00
Mike Black W9MDB
5701e73e1e
Fix valgrind warning
...
https://github.com/Hamlib/Hamlib/issues/1108
2022-08-31 08:57:00 -05:00
Mike Black W9MDB
6965927fb4
Add IC275 to icom rigs that can't do 0x25
2022-08-19 07:55:20 -05:00
Mike Black W9MDB
51650e9425
Remove get_dsp_flt for Xeigu X5105
2022-08-01 12:53:34 -05:00
Mike Black W9MDB
2b7c2ab5ce
Fix all Icom rigs AGC values for correct printout with dumpcaps
...
https://github.com/Hamlib/Hamlib/issues/1096
2022-07-29 23:44:17 -05:00
Mike Black W9MDB
4385b50b1f
Add Xiegu X5105 from G90 config
2022-07-28 10:33:07 -05:00
Mike Black W9MDB
05941406da
This broke Icom rigs.
...
Revert "Improve debug output on icom_get_vfo to note Icom's inability to get current vfo"
This reverts commit 02b2dad5b0
.
2022-07-22 15:51:22 -05:00
Mike Black W9MDB
02b2dad5b0
Improve debug output on icom_get_vfo to note Icom's inability to get current vfo
2022-07-22 12:57:11 -05:00
Mike Black W9MDB
b1369f9458
Fix ic9700 segfault
...
https://github.com/Hamlib/Hamlib/issues/1078
2022-07-07 22:10:49 -05:00
Mike Black W9MDB
04b9353d88
Change fix for IC9700 satmode to be more generic
...
https://github.com/Hamlib/Hamlib/issues/1059
2022-06-30 08:15:49 -05:00
Mike Black W9MDB
cd2b734150
Prevent IC9700 from using 0x25 0x26 commands when in satmode
...
https://github.com/Hamlib/Hamlib/issues/1059
2022-06-29 15:40:41 -05:00