Recent firmware versions since 4.37 now offer support for higher
resolution for the S-meter output via the SMH command. The K3 backend
performs the STRENGTH level routine and passes other levels to the
Kenwood backend.
This patch has not been tested with a firmware version older than 4.39
to assure that operation with the SM command still works as expected.
Create new confparams token of 'ritclr' for clearing RIT/XIT offset
without turning off RIT/XIT function. Thanks to Tor, N4OGW, for the
request. May be replaced in the future by a dedicated RIT/XIT clear
function in the Hamlib API.
As the K3 does not return a response to the AN? set command, direct the
backend to use kenwood_set_ant_no_ack() instead. Thanks to Alexander
Sack, KC2ZSX for catching this.
Wayne Burdick, N6KR, advises that the forthcoming KX3 (prototype
shown at Dayton Hamvention 2011) will have an identical command
set to the K3.
Fix K2 and K3 backend versions.
The K3 will swap VFOs with the frontend's implementation of
get_split_mode when the backend's definition in rig_caps is NULL. These
functions simply return -RIG_ENAVAIL when called to preserve the K3's
operating state.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3057 7ae35d74-ebe9-4afe-98af-79ac388436b8
The K2 and K3 support a TQ command to query the transmit status. As
only four bytes are returned it is much faster than the longer IF
command response. Access is via rig_get_ext_level--rigctl 'l' command
with a Level mnemonic of 'txst'. Returns '0' on RX and '1' on TX.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3032 7ae35d74-ebe9-4afe-98af-79ac388436b8
Implemented kenwood_cfg_params structure to allow RIT/XIT tokens to be
available to all Kenwood backend rigs (Fine Step and Voice announce are
also defined). K2/K3 rigs can only set/get RIT/XIT.
Updated README.k2/k3 for RIT/XIT functions and prior updates.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3031 7ae35d74-ebe9-4afe-98af-79ac388436b8
Implemented rig_get_ext_level() for the K3 FI command which returns the
last four digits of the IF center frequency. This value changes as the
operator adjusts the shift control, changes mode, or adjusts the bandwidth
control. The function returns the actual frequency of 8210000 Hz plus
the value returned by the FI command.
To get this frequency value the token IFCTR must be passed to
rig_get_ext_level(). This token is specific to the K3 backend.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3029 7ae35d74-ebe9-4afe-98af-79ac388436b8
K2 backend will now scan for installed RTTY mode and filters per
mode upon rig_open(). Implemented get/set mode in K2. The get_mode()
function checks the filter bandwith and returns that for the width
value and the set_() function will select and set an appropriate
filter based on the width passed in.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3021 7ae35d74-ebe9-4afe-98af-79ac388436b8
Among the changes:
I finally had the time to build the CAT interface for my TS450 and
discovered a couple of new commands.
MX; MX0; MX1; is used to activate the AIP function
FL; FLXXXYYY; is used to set the filters.
I made a perl script to try every possible two-letters command. If
amyone is interested, at their own risk, just ask.
I've then modified and optimized the kenwood driver:
- moved MD_ defined to .h
- added init/cleanup
- ts450_get_mode -> kenwood_get_mode_if
- support reading memory channel freq within kenwood_get_freq
- added kenwood_safe_transaction as an helper with result len check
- added kenwood_get_if
- added get_level for RIG_LEVEL_CWPITCH
- set/get for RIG_FUNC_AIP
- replaced ts140/680 get_mode and get_freq
- removed the delay on the ts450. it works just fine without it.
=============================
the attached patch requires the first one I sent and
addresses a few remaining issues
- converted 8 spaces to tabs
- added kenwood_mode_table
- added kenwood_simple_transaction helper func
- use kenwood2rmode and rmode2kenwood where possible
- some code cleanup
- use kenwood_safe/simple_transaction where possible
- added kenwood_get_mem_if (ts140,ts450,ts680,ts690,ts850)
- added kenwood_get_channel (ts450,ts850)
- added FUNC_FINE_STEP (commented out, we have no more func slots)
- added LEVEL_CWPITCH (set)
- no reason to have ts850_set_func, ts850_set_level
- ... ts480_get/set_ant, ts480_set_func
- ... ts570_set/get_ant, ts570_get_channel, ts570_get_rit
- ... ts680_set_func
- ... ts790_get_mode, ts790_get_vfo
this patch is a bit more extensive and tested only on the TS450.
feedback will be appreciated.
where I removed code I took care to verify that the generic
code in kenwood.c worked in the same way.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2591 7ae35d74-ebe9-4afe-98af-79ac388436b8