e900b4f9dc
Change set_icom_set_mode_with_data to not change mode unless necessary
...
Should allow filters to stay where they are set if USB-D is the starting mode
https://github.com/Hamlib/Hamlib/issues/791
2021-09-07 17:44:57 -05:00
ee56688003
Fix icom_set_func so that it can also turn off DUAL_WATCH
...
In ic756.c remove ic756_set_func and use icom_set_func instead
2021-09-01 09:00:56 -05:00
996dbbfa1a
Remove override of PKTUSB mode for Icom rigs -- don't think we need this
...
Was causing mode toggling on IC7300 during PTT transitions in JTDX
2021-08-28 10:21:16 -05:00
06513a6869
Remove another unneeded vfo swap from icom rigs
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 17:24:31 -05:00
547bd0fb55
Fix ANT get/set for IC756Pro series
...
https://github.com/Hamlib/Hamlib/issues/774
2021-08-22 16:40:48 -05:00
014bc04ddf
Fix Icom rigs to use 0x25 command if capable
...
Fixes #1 and and #2 in the issue
https://github.com/Hamlib/Hamlib/issues/762
2021-08-13 07:42:39 -05:00
4bfd71f91f
Fix Icom split and implement reverse split
...
These should work now from rigctl and via the API
S VFOB 1 VFOA
S Sub 1 Main
https://github.com/Hamlib/Hamlib/issues/754
2021-08-02 23:37:31 -05:00
756f8052fc
Minimize 0x25cmdfails resets to only when satmode changes
...
https://github.com/Hamlib/Hamlib/issues/741
2021-07-15 10:19:33 -05:00
6bdb82bc54
Fix some vfo swapping issues for Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/734
2021-07-08 13:14:42 -05:00
65c77953f8
Add MainA/B SubA/B to icom.c
...
https://github.com/Hamlib/Hamlib/issues/730
2021-07-05 17:04:24 -05:00
dd0187ede6
Fix Icom rig 0x25 command for set mode with data and no width change
...
Fix Icom rigs not working with rigtctld and 0x25 command
https://github.com/Hamlib/Hamlib/issues/733
2021-07-03 22:16:33 -05:00
763e18fa42
Fix get_mode_with_data for IC7800 as it can set but not read mode with 0x26 command
...
https://github.com/Hamlib/Hamlib/issues/725
2021-06-14 07:52:29 -05:00
f41bcaa71a
Add IC-575 rig
2021-06-03 16:13:58 -05:00
263c16984a
Attempt to handle asynchronously pushed Icom CI-V frames (transceive and spectrum data) as these frame will get interleaved with command responses
2021-05-30 01:36:49 +03:00
12527581b0
Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs.
2021-05-27 10:12:01 +03:00
b4ba22d369
Implemented initial abstraction for spectrum scope data and support for Icom spectrum data output. The abstraction is based on common features of both Icom and Kenwood rigs. Added TRANSCEIVE func and enumeration of supported AGC levels. Work in progress.
2021-05-26 23:40:53 +03:00
e84b8a3c99
Add special check for IC821H in icom_set_vfo
...
Seems the IC821H reverses Main/Sub logic when in satmode
Remove IC821 from riglist.h and icom.c -- not used
https://github.com/Hamlib/Hamlib/issues/693
2021-05-07 08:25:54 -05:00
2dd87806cf
Remove 3 second sleep from icom.c powerup
2021-04-30 15:59:43 -05:00
9a82ebf652
Make icom.c 0x25 cmd check only try once
...
https://github.com/Hamlib/Hamlib/issues/685
2021-04-27 10:00:10 -05:00
870b9ca748
In icom.c add check for current vfo to avoid vfo swapping
...
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
2021-04-19 09:51:58 -05:00
cd82a2c008
In icom.c fix reading VFOB width when 0 and set to VFOA width
...
https://github.com/Hamlib/Hamlib/issues/665
https://github.com/Hamlib/Hamlib/issues/654
2021-04-18 22:46:50 -05:00
7ea4fd17aa
Fix icom.c default vfo to usa VFOA/Main as appropriate
...
https://github.com/Hamlib/Hamlib/issues/654
2021-04-08 22:37:36 -05:00
fffaf27f87
Change icom.c to use Main instead of Main_A and Sub instead of Main_B
...
https://github.com/Hamlib/Hamlib/issues/637
2021-03-30 11:48:25 -05:00
4135a65503
Add TARGETABLE_FREQ and TARGETABLE mode to IC7300 IC7610 IC7800 IC785X IC9700
...
This reduces VFO swapping during get_freq and get_mode operations
Log4OMV2 2.0.12 supports vfo mode using new get_vfo_info call
New debug level RIG_DEBUG_CACHE as it can get very verbose
https://github.com/Hamlib/Hamlib/issues/626
2021-03-26 10:54:11 -05:00
f0a82fa2bf
Fix icom.c vfo detection
...
https://github.com/Hamlib/Hamlib/issues/624
2021-03-22 07:54:46 -05:00
80e199b302
Add satmode detection for Icom rigs like IC9700
...
In satmode VFOB/Sub now maps to SubA (2nd VFO)
https://github.com/Hamlib/Hamlib/issues/621
2021-03-20 08:07:16 -05:00
950163f1a4
Rigs like IC9700 with MainA/B will have VFOA/Main mapped to MainA and VFOB/Sub mapped to MainB
...
No known use for SubA/SubB yet
https://github.com/Hamlib/Hamlib/issues/621
2021-03-19 23:36:33 -05:00
c1277b170e
Fix Icom icom_get_usb_echo_off to read the freq response when echo is on
...
This takes into account whatever the response time of the rig is
https://github.com/Hamlib/Hamlib/issues/615
2021-03-18 22:46:45 -05:00
0942553687
Fix icom_get_raw_buf
...
https://github.com/Hamlib/Hamlib/issues/612#issuecomment-800404923
2021-03-16 12:29:01 -05:00
d66e0b9807
Narrow the Icom NAK packet check to only 6 byte frames
...
https://github.com/Hamlib/Hamlib/issues/607
2021-03-14 16:43:17 -05:00
dff7bdd7a7
For icom recognize bad command return packets e.g. fe fe e0 50 fa fd
...
https://github.com/Hamlib/Hamlib/issues/607
2021-03-13 08:03:53 -06:00
803a8d9e5e
Fix icom.c logic to not reject good answers
...
https://github.com/Hamlib/Hamlib/issues/596
2021-03-10 11:49:47 -06:00
ef2e8a4d94
Change all icom calls to explicitly check for ACK/NAK
...
If neither is received a timeout error occurs so a retry will be done
Serial corruption was causing NAK rejects which was the wrong way to handle it
https://github.com/Hamlib/Hamlib/issues/587
2021-03-06 09:22:21 -06:00
2c20b0afdb
After echo check to a get_freq in icom.c
...
Should fix poweron for Icom rigs that still echo in standby mode
https://github.com/Hamlib/Hamlib/issues/583
2021-03-05 07:32:01 -06:00
1473793f14
Change icom echo detection to a more robust solution.
...
https://github.com/Hamlib/Hamlib/issues/583
2021-03-04 11:01:23 -06:00
3ca0313fb4
Implement RETURNFUNC in icom.c
...
https://github.com/Hamlib/Hamlib/issues/514
2021-03-03 16:57:03 -06:00
e5964fe670
Fix IC706 for 5 byte channels
...
https://github.com/Hamlib/Hamlib/issues/295
2021-02-23 23:16:00 -06:00
1e9a991a25
Add set_dsp_flt for IC7000 -- any other Icom rigs can use this?
...
https://github.com/Hamlib/Hamlib/issues/521
2021-02-17 22:52:48 -06:00
660fd94962
Change all icom rigs to watts for RIG_LEVEL_RFPOWER_METER_WATTS
...
Divide by 100 for old power call
2021-02-12 16:37:17 -06:00
e589e078a1
Add 3 second sleep in icom powerstat to allow the rig to wake up
...
https://github.com/Hamlib/Hamlib/issues/525
2021-02-03 12:54:30 -06:00
cd7811f3ed
Fix icom_get_mode for rigs with 1-byte mode_len
...
https://github.com/Hamlib/Hamlib/issues/522
2021-01-29 16:32:16 -06:00
5a9daf5f0e
Fix ic703 and ic705 RIG_LEVEL_RFPOWER_METER_WATTS to scale to 10W instead of 100W
2021-01-20 15:07:59 -06:00
8024ffb937
Change icom_get_usb_echo_off to return TIMEOUT when it occurs instead of RIG_OK
...
https://github.com/Hamlib/Hamlib/issues/509
2021-01-13 12:42:03 -06:00
cf858bfa3c
Change rig.c to return RIG_ENAVAIL instead of RIG_ENTARGET when set_vfo==NULL
...
Add IC706* to rigs that don't do dsp settings
Remove dynamic detection of transceive status in icom/frame.c
https://github.com/Hamlib/Hamlib/issues/490
2021-01-08 12:04:25 -06:00
02c0854434
In icom.c init() set priv->filter to RIG_PASSBAND_NOCHANGE to fix set_mode rigs with 2-byte cmds
...
https://github.com/Hamlib/Hamlib/issues/490
2021-01-06 17:04:44 -06:00
2b1bce89bf
Fix icom default filter settings
...
https://github.com/Hamlib/Hamlib/issues/471
2020-12-19 14:30:31 -06:00
2a0deb3415
Add RIG_LEVEL_RFPOWER_METER_WATTS
...
Old level of 0-1 just doesn't work well with the varying power levels in rigs now
2020-12-16 17:47:49 -06:00
3061a5f8b2
Fix icom filter value, not ASCII!!!
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:40:04 -06:00
0fa00cb14f
Missed icom.h commit
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:31:32 -06:00
f22d4a6dbe
Update icom.h version
2020-12-12 10:07:03 -06:00
Mike Black W9MDB