Mike Black W9MDB
71f5766d57
Really fix the k3.c compilation warning
2022-07-14 06:54:56 -05:00
Mike Black W9MDB
94338d46dd
Fix compilation warning in k3.c
2022-07-13 09:24:01 -05:00
Daniele Forsi IU5HKX
08c06aea14
Fix spelling errors
...
Fixed with:
codespell --summary --skip=.git,extra,,lib,macros,security --ignore-words-list="ans,ba,cant,develope,fo,get's,nin,numer,parm,parms,setts,som,statics,ths,ue,vektor,objext" --write-changes --interactive=2
and manual editing.
2022-07-07 23:56:22 +02:00
Mike Black W9MDB
6f9d057162
astyle files getting ready for release
2022-05-13 16:50:13 -05:00
Mike Black W9MDB
4bf2a8a2b8
Fix missing semicolon in k3.c
2022-05-13 11:03:55 -05:00
Mike Black W9MDB
6ad3ace726
Add FUNC_MUTE to K4 in k3.c
2022-05-11 16:36:02 -05:00
Mike Black W9MDB
ddf0be7b72
Fix rig->state.rx_vfo and tx_vfo for Elecraft K4
2022-05-07 17:35:17 -05:00
Mike Black W9MDB
279bc84dfe
Restrict extra 100ms time in k4_set_ptt to PTT_OFF
2022-05-06 13:35:04 -05:00
Mike Black W9MDB
6cc4aefdb0
Add 100ms more time to end of k4_set_ptt.
...
Had one report of K4 infrequently not returning to RX from TX when in Fake It mode.
Suspect a little more time is needed between TQ0; response and FA freq set
2022-05-06 13:31:34 -05:00
Mike Black W9MDB
c0d298f0eb
Change k4_set_ptt to remove infinite loop when REC is in use
...
https://github.com/Hamlib/Hamlib/issues/1021
2022-05-05 22:20:31 -05:00
Mike Black W9MDB
d60391fcb0
Fix k2/k3/k4 bandwidth to 10Hz rounding
2022-05-04 13:14:01 -05:00
Mike Black W9MDB
e3bf699732
Fix k3.c compilation
2022-05-04 08:57:34 -05:00
Mike Black W9MDB
704a6aac4b
Correct handling of max power output of KX2/KX3 with KXPA100
...
Handle extended reply of K3
2022-05-04 07:46:01 -05:00
Mike Black W9MDB
223d2b7c11
Add 200ms delay for K3/K3S when frequency changes by more then 1MHz (i.e. band change)
...
https://github.com/Hamlib/Hamlib/issues/977
2022-03-05 23:07:25 -06:00
challinan
a41df58487
Add support for K3 Morse send via KY(W) command
2022-02-20 22:19:26 -05:00
Mike Black W9MDB
144debb46a
Update hamlib_check_rig_caps
2022-02-11 11:34:26 -06:00
Mike Black W9MDB
68e121d82c
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
...
This is necessary to keep alignment between the client view of rig->state and the shared libarary view
Including PTHREAD functions in rig->state necessitated this as HAVE_PTHREAD only defined during hamlib compilation.
Clients including hamlib/rig.h did not pick up all the HAVE* config variable that control what gets included
https://github.com/Hamlib/Hamlib/issues/947
2022-02-04 07:41:36 -06:00
Mike Black W9MDB
92542cb028
Change sprintf to SNPRINTF in kenwood rigs
...
https://github.com/Hamlib/Hamlib/issues/857
2022-01-18 23:03:43 -06:00
Mike Black W9MDB
18f69356c9
Change sprintf to SNPRINTF for kenwood files
2022-01-10 23:03:54 -06:00
Mike Black W9MDB
01b7f81119
Add a data tag to the caps structure and a test in rig_init to ensure the data tag is where it is expected
...
Modify testrigcaps.c to test new data tag
This should detect any changes which corrupt rig_caps from additons/subtractions/changes to the structure
2021-12-31 23:49:29 -06:00
Mike Black W9MDB
63a51c36a1
astyle files preparing for 4.4 release
2021-11-28 12:41:10 -06:00
Mike Black W9MDB
0032f567e1
More fixes to k4_set_ptt
...
https://github.com/Hamlib/Hamlib/issues/864
2021-11-10 18:05:27 -06:00
Mike Black W9MDB
4c530dc578
More fixes to k4_set_ptt
...
https://github.com/Hamlib/Hamlib/issues/864
2021-11-10 17:49:49 -06:00
Mike Black W9MDB
782e39eb33
More fixes to k4_set_ptt
...
https://github.com/Hamlib/Hamlib/issues/864
2021-11-10 17:39:08 -06:00
Mike Black W9MDB
7dceda7d2c
More fixes to k4_set_ptt
...
https://github.com/Hamlib/Hamlib/issues/864
2021-11-10 17:27:47 -06:00
Mike Black W9MDB
65cc461918
Fix k4_set/get ptt
2021-11-10 17:09:51 -06:00
Mike Black W9MDB
ff89d6441e
Add new k4_set_ptt
...
https://github.com/Hamlib/Hamlib/issues/864
2021-11-10 16:57:14 -06:00
Mike Black W9MDB
6ba1bc0811
Add elecraft_get_vfo_tq to take advantage of K4's new TQ command
...
https://github.com/Hamlib/Hamlib/issues/863
2021-11-09 17:07:40 -06:00
Mike Black W9MDB
a3e888dc3f
Fix post_write_delay for K3 and zeroize for K4
...
f5abd7a176
2021-11-09 11:17:51 -06:00
Mike Black W9MDB
f5abd7a176
Add 10ms post_write_delay for the K3 -- was not going into split
...
Seems faster computers are speeding up serial I/O
https://github.com/Hamlib/Hamlib/issues/839
2021-10-23 13:24:36 -05:00
Mike Black W9MDB
5e90774728
Change detection of Elecraft K4 in k3.c to use VFOB commands
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-20 08:52:13 -05:00
Mike Black W9MDB
6b6156c416
Fix Elecraft K3 BW$ length read warning
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-19 06:46:25 -05:00
Mike Black W9MDB
a15726e652
For the Elecraft K4 changing mode on either VFO while in split will now change mode on the other VFO
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-19 06:42:37 -05:00
Mike Black W9MDB
736072bbaf
Fix k3.c case of BW command
2021-10-18 15:27:30 -05:00
Mike Black W9MDB
84df12919f
Fix Elecraft K3 DT/DT$ command to expect the correct answer length
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 22:54:09 -05:00
Mike Black W9MDB
899cd71b1d
Fix Elecraft K3/K4 bandwidth BW to expect 6 instead of 7 response
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 22:49:50 -05:00
Mike Black W9MDB
1b10d113f2
Add debug info to k3_set_mode
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 06:54:07 -05:00
Mike Black W9MDB
25e5f59300
Fix k3.c build
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 06:47:26 -05:00
Mike Black W9MDB
015d79cc80
Fix k3_set_mode for K4 VFOB case
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 06:43:18 -05:00
Mike Black W9MDB
50512b4bf9
Fix Elecraft K4 set_mode to work with VFOB
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-15 12:05:46 -05:00
Mike Black W9MDB
283281c4cb
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
Mike Black W9MDB
9cf4b1658f
Move FT1 command to K4 rig only
2021-08-14 23:45:59 -05:00
Mike Black W9MDB
4c91889a10
For Elecraft add a set split after DT$ command in set_split_mode
...
On the K4 the setting of VFOA was turning split off
https://github.com/Hamlib/Hamlib/issues/748
2021-08-14 22:36:33 -05:00
Mike Black W9MDB
e7e5cc063d
Fix K4 split problems
...
https://github.com/Hamlib/Hamlib/issues/748
2021-08-04 22:45:54 -05:00
Mike Black W9MDB
ca7ca873bc
Add TARGETABLE_MODE to k3.c
...
https://github.com/Hamlib/Hamlib/issues/728
2021-06-24 17:48:30 -05:00
Mike Black W9MDB
c8439de131
Reverse K3 PKTLSB/PKTUSB sensing
...
Was causing WSJTX to get a PKTLSB response after sending PKTUSB
These rigs now only set MD when MD needs changing which speeds up the polling cycle
https://github.com/Hamlib/Hamlib/issues/726
2021-06-18 22:58:49 -05:00
Mike Black W9MDB
b80ff9330c
Add debug to k3.c to chase down mode setting problem
...
https://github.com/Hamlib/Hamlib/issues/726
2021-06-18 10:35:27 -05:00
Mike Black W9MDB
c7b10e0e8f
Change K3 rigs to query MD and not set if not a change
...
K3S was taking 400ms to do MD6; when already in MD6; so query is a lot faster
Will also avoid trying to set mode when PTT is on
https://github.com/Hamlib/Hamlib/issues/722
2021-06-12 10:25:02 -05:00
Mike Black W9MDB
493860dae8
Add ; to k3.c to please the eye
2021-05-07 12:30:14 -05:00
Michael Black W9MDB
ff659d9c74
Reverse MD6/MD9 for k3.c
...
https://github.com/Hamlib/Hamlib/issues/638
2021-03-29 23:39:29 -05:00