Mike Black W9MDB
da9199577e
Add voice_mem commands for TS990S
2023-09-17 16:26:50 -05:00
Mike Black W9MDB
5115fa8959
Fix Kenwood PB command to stop last requested voice channel started
...
https://github.com/Hamlib/Hamlib/issues/1385
2023-09-16 09:36:00 -05:00
Mike Black W9MDB
d50ff331ee
Add AGC level get/set to Barrett 4050
...
https://github.com/Hamlib/Hamlib/issues/1384
2023-09-15 11:43:48 -05:00
Mike Black W9MDB
9415fc3446
Expand Barret channels to include non-ham bands
2023-09-15 10:49:55 -05:00
Mike Black W9MDB
8a4767db17
Add kenwood_stop_voice and fix TS890S send_voice
2023-09-14 17:29:20 -05:00
Mike Black W9MDB
4df8260cc1
Stop validating TX1; on FT-950 -- seems it didn't like TX; after TX1;
...
https://github.com/Hamlib/Hamlib/issues/1382
2023-09-14 10:11:27 -05:00
Mike Black W9MDB
5b4654024a
Fix MD cmd for Win4Yaesu by not validating it. Was not responding fast enough and timing out during validation efforts
...
https://github.com/Hamlib/Hamlib/issues/1381
2023-09-12 16:04:14 -05:00
Mike Black W9MDB
81e14ae4f1
Remove ST command from newcat.c for FTDX101D/MP set_tx_vfo
...
Seems to fail on latest firmware for FTDX101MP
https://github.com/Hamlib/Hamlib/issues/1379
2023-09-11 22:09:11 -05:00
Mike Black W9MDB
6f229d1c1a
Fix FTDX101D/MP to not validate ST command
...
https://github.com/Hamlib/Hamlib/issues/1379
2023-09-11 16:17:54 -05:00
Mike Black W9MDB
c07e40e18b
Fix memory channgle in FTDX101 and FTDX101MP
...
Add tag data to memsave.c
Fix RVF error for Elecraft K3
2023-09-08 17:05:34 -05:00
Mike Black W9MDB
256766c5b6
Fix Elecraft K3 RVF fail to just warn and not quit
2023-09-08 16:54:15 -05:00
Mike Black W9MDB
8ebadb3b7d
Get more firmware info for Elecraft K3
2023-09-07 12:01:18 -05:00
Mike Black W9MDB
3c48de2159
Update FT991 channel list to include PMS and 5MHz channels
2023-09-07 11:27:43 -05:00
Mike Black W9MDB
5963e149a9
Fix IC-590 filter byte
...
https://github.com/Hamlib/Hamlib/issues/1375
2023-08-28 23:34:28 -05:00
Mike Black W9MDB
5d12e5f8bd
Fix IC-905 10Ghz+ set/get freq and lower frequencies too
...
https://github.com/Hamlib/Hamlib/issues/1375
2023-08-27 15:43:28 -05:00
Mike Black W9MDB
6e7aec3077
Fix IC905 test for 5.8GHz (not MHz)
...
vi simic905.c
2023-08-27 12:33:11 -05:00
Mike Black W9MDB
875214eb54
Fix IC-905 set_freq -- get_freq should be working
...
https://github.com/Hamlib/Hamlib/issues/1375
2023-08-27 12:08:00 -05:00
Mike Black W9MDB
8ede3518f1
Remove VFO_OP_XCHG from IC-905 as it's not working in firmware V1.11 anymore
...
https://github.com/Hamlib/Hamlib/issues/1374
2023-08-26 16:06:20 -05:00
Mike Black W9MDB
c1f24b2f7a
Fix TS2000 SA command
2023-08-25 15:36:12 -05:00
Mike Black W9MDB
46c0649b23
Fix spacing in k3/k4_stop_morse
...
https://github.com/Hamlib/Hamlib/issues/1366
2023-08-21 16:33:53 -05:00
Mike Black W9MDB
453a8cc94f
Fix K3/K4 stop_morse
...
https://github.com/Hamlib/Hamlib/issues/1366
2023-08-21 15:10:41 -05:00
Mike Black W9MDB
194906b290
For QRPLabs ignore the IF return length as the differenet models can't agree on the length.
...
QMX adds an extra space on the end with firmware 1_00_09
https://github.com/Hamlib/Hamlib/issues/1372
2023-08-21 10:13:26 -05:00
Mike Black W9MDB
1b0f0ec422
Fix K3 stop_morse RPRT return
...
https://github.com/Hamlib/Hamlib/issues/1365
2023-08-19 15:35:54 -05:00
Mike Black W9MDB
b40da0f6b0
Increase send_morse size to use maximum for rigs or 20 chars (if morse_qsize unknown)
...
This will still allow for up to 1023 characater to queue up.
No guarantees on which rigs allow for this queuing though.
Kenwood rigs can at least find the buffer status to wait for room but not all rigs do.
https://github.com/Hamlib/Hamlib/issues/1368
2023-08-19 12:36:07 -05:00
Mike Black W9MDB
424e8cc04a
Reduce KY wait time in kenwood.s to 50ms instead of 500ms
...
https://github.com/Hamlib/Hamlib/issues/1366
2023-08-19 11:22:31 -05:00
Mike Black W9MDB
3492be2562
Fix compile warning in flex6xxx.c
2023-08-19 08:29:05 -05:00
Mike Black W9MDB
af86f44eac
Fix CW morse infinite loop when error occurs RIG_EINVAL
2023-08-18 22:35:21 -05:00
Mike Black W9MDB
d57e4ae185
Improve Kenwood send_morse speed
2023-08-18 17:36:19 -05:00
Mike Black W9MDB
3318766a7c
Add stop_morse to elecraft rigs
...
https://github.com/Hamlib/Hamlib/issues/1366
2023-08-18 16:54:19 -05:00
Mike Black W9MDB
3814f2dadf
Add set_voice_mem and stop_voice_mem for K3/K3S/K4
...
https://github.com/Hamlib/Hamlib/issues/1367
2023-08-18 16:49:35 -05:00
Mike Black W9MDB
57ebd647eb
Add split capability to Xiegu G90
...
https://github.com/Hamlib/Hamlib/issues/1364
2023-08-18 10:56:58 -05:00
Mike Black W9MDB
7eefc77f5d
Revert "Fix G90 by changing set/get_mode_with_data to set/get_mode and suppress icom_get_dsp_flt"
...
G90 Firmware 1.80 fixes the x1a x03 command along with x25/x26
This reverts commit 01730082fb
.
2023-08-18 09:27:05 -05:00
Mike Black W9MDB
01730082fb
Fix G90 by changing set/get_mode_with_data to set/get_mode and suppress icom_get_dsp_flt
...
https://github.com/Hamlib/Hamlib/issues/1364
2023-08-18 08:06:14 -05:00
Mike Black W9MDB
0edd1df223
Add more KEYERTYPE implementaions to Icom rigs
2023-08-18 00:04:59 -05:00
Mike Black W9MDB
147dea7651
Remove get_dsp_flt for G90 as it does not have that command
2023-08-17 22:57:11 -05:00
Mike Black W9MDB
ccd6472f03
Fix KEYERTYPE in ic7300.c and add parsing of STRAIGHT, BUG, PADDLE for rigctl(d)
...
https://xiegu.eu/downloads/
2023-08-17 22:49:20 -05:00
Mike Black W9MDB
8c63fdeafc
Add KEYERTYPE for IC-7300, IC-705, IC-9700
...
https://github.com/Hamlib/Hamlib/issues/1363
2023-08-17 17:52:03 -05:00
Mike Black W9MDB
aa338afa1a
Fix parm_gran for Kenwood
...
https://github.com/Hamlib/Hamlib/issues/1357
2023-08-17 17:12:33 -05:00
Mike Black W9MDB
63bb03cb07
Fix Yaesu gran_parm
...
https://github.com/Hamlib/Hamlib/issues/1357
2023-08-17 16:57:05 -05:00
Mike Black W9MDB
e887152407
Fix parm_gran
...
https://github.com/Hamlib/Hamlib/issues/1357
2023-08-17 16:04:45 -05:00
Mike Black W9MDB
beb69f752a
Add BACKLIGHT to IC7300
...
Add get_powerstat to IC9700 which speeds up start when auto_power_on is detected
2023-08-14 22:22:55 -05:00
Mike Black W9MDB
f0765e6c3a
Remove more noisy debug from frame.c
2023-08-12 11:32:27 -05:00
Mike Black W9MDB
7392d206a8
Remove noisy debug from frame.c
2023-08-12 11:06:42 -05:00
Mike Black W9MDB
fb3d83a19a
Add BANDSELECT to PowerSDR
...
https://github.com/Hamlib/Hamlib/issues/1353
2023-08-11 17:50:42 -05:00
Mike Black W9MDB
d7d450df49
Add parm BANDSELECT for Yaesu rigs
...
'p BANDSELECT' returns current band of VFOA
'P BANDSELECT BAND160M' example selects the 160M band
'P BANDSELECT ?' shows bands available for the rig
Kenwood rigs will be next
Icom rigs TBD when Icom explains the return from 0x1a 0x01 -- no bandselect possible so manual setting of rig values
https://github.com/Hamlib/Hamlib/issues/1353
2023-08-11 10:40:42 -05:00
Mike Black W9MDB
23ae64eead
Add is_ft710 for SH command in newcat.c
2023-08-05 12:15:28 -05:00
Mike Black W9MDB
457b09d50f
Fix FTDX101D/MP to allow new 3200/3500/4000Hz bandwidths
...
https://github.com/Hamlib/Hamlib/issues/1355
2023-08-05 09:45:24 -05:00
George Baltz N3GB
b1bef6101b
Convert RFPOWER to level_gran usage
...
Two rigs (FTDX3000dm & FT450D) handled slightly abnormally - both should
function as before.
Remove 2 now unused variables to avoid compiler warnings.
2023-08-03 10:01:30 -04:00
George Baltz N3GB
915ee383fb
Convert MONITOR_GAIN
2023-08-03 10:01:30 -04:00
George Baltz N3GB
cbec337cd3
Convert SQL to use level_gran data.
2023-08-03 10:01:30 -04:00