mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
8 127 Commity
53 Gałęzie
28 Tagi
33 MiB
Wykres commitów

56 Commity (1d067d6a4302be573b89d304e4da90784c632a84)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 63a51c36a1 astyle files preparing for 4.4 release 2021-11-28 12:41:10 -06:00
Mike Black W9MDB 9554e4937d Redo mcHF rig from ft817 to ft847 
https://github.com/Hamlib/Hamlib/issues/852
 2021-11-03 22:26:37 -05:00
Mike Black W9MDB a271948b3d Add mcHF QRP rig model#1045 
https://github.com/Hamlib/Hamlib/issues/852
 2021-11-03 11:31:40 -05:00
Mike Black W9MDB 17bbd2f602 Update version date in ft817.c 2021-09-16 15:57:37 -05:00
Wouter van Gulik 345729421d ft817: Only set the VFO after a successful read. 2021-09-16 22:43:12 +02:00
Wouter van Gulik 7d605c86bd Split on/off is used so drop comment saying it is not yet 2021-09-16 22:43:12 +02:00
Wouter van Gulik 759cbbed3b ft817.c: Improve get_ptt by fetching TX_STATUS explicitly, instead of 
doing a manual cache timeout.
Also be consistent: if we allow set_ptt to be rejected then also allow
get_tx_status en get_ptt to be rejected without failing.
Stop settings ptt_response to -1; it is only set when we got a reply so
it is a sane value or the default, no need set it again.
 2021-09-16 22:43:05 +02:00
Wouter van Gulik 90f27ac7aa ft817.c: Use ft817_get_ptt instead of open coding it. 2021-09-16 22:42:07 +02:00
Wouter van Gulik 34492271bc ft817.c: Only get dig mode when needed. 
This improves getting frequency and mode because we can skip reading EEPROM
 if not needed.
 2021-09-16 22:42:07 +02:00
Mike Black W9MDB dcb85aa52a Fix debug print in ft817.c 2021-09-11 10:39:51 -05:00
Wouter van Gulik 5aa1572a30 Merge branch 'master' into ft817_improvements 2021-09-04 23:08:48 +02:00
Wouter van Gulik 6f02f38fdc Add 60m to the 818 tx capabilities, it is one fo the few differences 
between 818 and 817.
 2021-09-04 22:57:23 +02:00
Wouter van Gulik 49b2eca6c1 Add get_ant for 817. NO TESTED! I ONLY HAVE A FT818! 2021-09-04 22:57:23 +02:00
Wouter van Gulik 4cf092fc0b Implement get_ant (for 818 only) Add antenna info to RX lists 2021-09-04 22:20:54 +02:00
Wouter van Gulik 83b887ca8c Properly implement getting ALC, RFPOWER and SWR for 817/818. 
Previous implementation used improper command, and incorrect calibration,
and did not enable it in the caps.
Add SWR since that was easy enough.
 2021-09-04 22:20:48 +02:00
Wouter van Gulik 53035454f2 Use plain 5 instead of YAESU_CMD_LENGTH as it is not related and only brings confusion 2021-09-04 22:13:32 +02:00
Wouter van Gulik 775fc832f6 Drop unused command typedef 2021-09-04 22:13:32 +02:00
Wouter van Gulik 12889cd957 Add definition of TX metering CAT command 2021-09-04 22:13:32 +02:00
Wouter van Gulik e825e5b4c9 ft817: Move relevant code fomr header to C file. 
Dropped pointless NULL check before free.
Explicitly implemented digi_mode instead of awkward add on to fm_status
Handle unlikely case of getting bogus digi mode, this prevent a garbage
read while determining the bandwidth of the mode
 2021-09-04 22:13:32 +02:00
Mike Black W9MDB 5ece51ef2f Remove priv statement 2021-09-04 22:13:31 +02:00
Wouter van Gulik 78160a1bf6 FT817/FT818 Drop pcs and use ncmd direct 2021-09-04 22:13:31 +02:00
Wouter van Gulik 9849a1bcaf Implement get_vfo/set_vfo for FT817/FT818. 
Read the eeprom to get VFO and toggle VFO if not the desired VFO is selected.
This code is the ft857 implementation, but EEPROM address 0x55 instead of 0x68.
 2021-09-04 22:13:31 +02:00
Wouter van Gulik cb9ea39c66 Move private data structs of ft100, ft600, ft817, ft857, ft897 to the C file. 
Note that is already so for all other Yaesu device.
Leave private data in newcat; it is used by multiple rigs.
 2021-09-04 22:13:31 +02:00
Mike Black W9MDB d102839284 Remove priv statement 2021-08-17 15:43:21 -05:00
Wouter van Gulik 485612008f FT817/FT818 Drop pcs and use ncmd direct 2021-08-17 22:02:45 +02:00
Wouter van Gulik 01ac8022e1 Implement get_vfo/set_vfo for FT817/FT818. 
Read the eeprom to get VFO and toggle VFO if not the desired VFO is selected.
This code is the ft857 implementation, but EEPROM address 0x55 instead of 0x68.
 2021-08-17 21:48:25 +02:00
Wouter van Gulik 673733700f Move private data structs of ft100, ft600, ft817, ft857, ft897 to the C file. 
Note that is already so for all other Yaesu device.
Leave private data in newcat; it is used by multiple rigs.
 2021-08-17 20:23:03 +02:00
Michael Black W9MDB 341828a319 astyle files 2020-10-15 15:44:43 -05:00
Michael Black W9MDB 8462796b00 Fix typo in ft817.c 2020-10-15 12:50:21 -05:00
Michael Black W9MDB 6a65b41698 Another attempt to get ft817 PWR_ON working 
https://github.com/Hamlib/Hamlib/issues/418
 2020-10-15 12:36:24 -05:00
Michael Black W9MDB 6807fa739a Add rig_flush to ft817_send_cmd 
https://github.com/Hamlib/Hamlib/issues/419
 2020-10-15 12:02:03 -05:00
Michael Black W9MDB 733bd9d280 2nd attempt to fix ft817 PWR_ON 
https://github.com/Hamlib/Hamlib/issues/419
 2020-10-15 11:59:59 -05:00
Michael Black W9MDB ab51d7ec66 Helps if I commit the fixed version.... 
https://github.com/Hamlib/Hamlib/issues/419
 2020-10-15 11:48:01 -05:00
Michael Black W9MDB 18e43245bc An attempt to get FT-817 PWR_ON working 
https://github.com/Hamlib/Hamlib/issues/419
 2020-10-15 10:04:33 -05:00
Michael Black W9MDB 7d7622face Add 50ms sleep after during set_freq for ft817 
https://github.com/Hamlib/Hamlib/issues/418
 2020-10-13 17:34:34 -05:00
Michael Black W9MDB 70a448fe85 Fix FT817 FT817_NATIVE_CAT_GET_RX_STATUS byte count, should be 1 and not 2 
https://github.com/Hamlib/Hamlib/issues/416
 2020-10-12 22:42:27 -05:00
Michael Black W9MDB 1115314782 Add version info to ft817_init 2020-10-12 15:47:35 -05:00
Michael Black W9MDB 9a2625ebef Add ALC, SWR and change PWR to table lookup for FT817 
https://github.com/Hamlib/Hamlib/issues/406
 2020-10-09 16:21:15 -05:00
Michael Black W9MDB 86777dcf78 Fix set_powerstat for ft817 and add for ft857 ft897 
https://github.com/Hamlib/Hamlib/issues/363
 2020-09-03 17:07:09 -05:00
Michael Black W9MDB fade1681fa Fix cppcheck errors and warnings 2020-09-02 16:56:11 -05:00
Michael Black W9MDB 331d9773b0 Add minimal WRITE_DELAY to ft817 
https://github.com/csete/gpredict/issues/227
 2020-08-21 08:05:39 -05:00
Michael Black W9MDB 39670273c1 FT-817/818 doing dual reads causes vfo tuning to return -RIG_EIO 
So we will ignore the retry errors as the read normally works
but we need to allow for VFO tuning
https://github.com/Hamlib/Hamlib/issues/340
 2020-07-10 17:02:16 -05:00
Michael Black W9MDB a3bb987e23 Fix cppcheck warnings 2020-07-03 16:17:59 -05:00
Michael Black W9MDB df3285de60 Add FT818 to rigs as copy of FT817 2020-07-02 12:31:09 -05:00
Michael Black W9MDB c332036efe astyle ft817.c 2020-06-29 07:55:55 -05:00
Michael Black W9MDB 555dba37fb Add debug to FT817/857/897 
Add fallback to non-ack protocol with 10ms post_write_delay if ack error occurs
https://github.com/Hamlib/Hamlib/issues/330
 2020-06-29 07:50:55 -05:00
Michael Black W9MDB 3fbaeaf871 Change ft857 and ft897 to use ft815_read_ack and dynamic post_write_delay instead of static 
This will support adjusting post_write_delay to hopefully fix a problem on older/slower Mac systems
https://github.com/Hamlib/Hamlib/issues/330
 2020-06-28 23:34:23 -05:00
Michael Black W9MDB 0ac0d4911a Remove cache from FT-817 get_freq -- comments indicate 2 consistent reads are needed for some reason 
https://github.com/Hamlib/Hamlib/issues/329
 2020-06-25 23:20:55 -05:00
Michael Black W9MDB b6a960d48e All conversions to rig_flush now done 
https://github.com/Hamlib/Hamlib/issues/307
 2020-06-23 09:01:46 -05:00
Michael Black W9MDB 81be0ad3e8 Remove VFO_CURR checks from ft817.c 
https://github.com/Hamlib/Hamlib/issues/305
 2020-06-16 08:23:55 -05:00