mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Add Icom IC-7100 support. 

From Martin, CT1IQI:

"Several programs under Linux rely on Hamlib for control. I wanted to
try WSJT-X (digital modes like JT65) and found that my new IC-7100 was
not yet supported, also after having compiled the current git version of
Hamlib and having compiled WSJT-X against that.

So I added a IC-7100 by taking the ic-7200 and 7420 rig files as
example, be it without going (yet) through all of the very many commands
the ic-7100 supports.

This produced the situation where there was communication, e.g. setting
and reading frequencies, but the PTT control did not work.  I debugged
that to actually the lack of a PTT mode in Hamlib that uses serial and
CAT at the same time; currently PTT per 'serial' seems equivalent to
toggling certain RS232 pins but not to any serial command level. So I
added a RIG_PTT_SERIAL_CAT mode for PTT control. Now the wsjt-x program
works nicely with the ic-7100 and controls both frequency and PTT via
the single USB cable."

Signed-off-by: Nate Bargmann <n0nb@n0nb.us>
Hamlib-3.0
mvcstroomer 2013-10-19 19:41:21 +01:00 zatwierdzone przez Nate Bargmann
rodzic 29cb138210
commit e9ee671149
8 zmienionych plików z 307 dodań i 5 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
icom/Android.mk
Wyświetl plik

@ -10,7 +10,7 @@ LOCAL_SRC_FILES := ic706.c icr8500.c ic735.c ic775.c ic756.c \
ic765.c ic781.c ic471.c id1.c icr9000.c icr9500.c \ ic765.c ic781.c ic471.c id1.c icr9000.c icr9500.c \
icr10.c icr20.c icr71.c icr72.c icr75.c icrx7.c \ icr10.c icr20.c icr71.c icr72.c icr75.c icrx7.c \
ic707.c ic728.c ic751.c ic761.c \ ic707.c ic728.c ic751.c ic761.c \
ic78.c ic7800.c ic7000.c ic7200.c ic7600.c ic7700.c \ ic78.c ic7800.c ic7000.c ic7100.c ic7200.c ic7600.c ic7700.c \
icom.c frame.c optoscan.c icom.c frame.c optoscan.c
LOCAL_MODULE := icom LOCAL_MODULE := icom

2
icom/Makefile.am
Wyświetl plik

@ -6,7 +6,7 @@ ICOMSRC = ic706.c icr8500.c ic735.c ic775.c ic756.c \
ic765.c ic781.c ic471.c id1.c icr9000.c icr9500.c \ ic765.c ic781.c ic471.c id1.c icr9000.c icr9500.c \
icr10.c icr20.c icr71.c icr72.c icr75.c icrx7.c \ icr10.c icr20.c icr71.c icr72.c icr75.c icrx7.c \
ic707.c ic728.c ic751.c ic761.c \ ic707.c ic728.c ic751.c ic761.c \
ic78.c ic7800.c ic7000.c ic7200.c ic7600.c ic7700.c \ ic78.c ic7800.c ic7000.c ic7100.c ic7200.c ic7600.c ic7700.c \
icom.c icom.h icom_defs.h frame.c frame.h optoscan.c optoscan.h icom.c icom.h icom_defs.h frame.c frame.h optoscan.c optoscan.h
noinst_LTLIBRARIES = libhamlib-icom.la noinst_LTLIBRARIES = libhamlib-icom.la

271
icom/ic7100.c 100644
Wyświetl plik

@ -0,0 +1,271 @@
/*
* Hamlib CI-V backend - description of IC-9100 (HF/VHF/UHF All-Mode Tranceiver)
* Copyright (c) 2000-2011 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "idx_builtin.h"
#include "bandplan.h"
#define IC7100_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_CWR|\
RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC7100_OTHER_TX_MODES ((IC7100_MODES) & ~RIG_MODE_AM)
#define IC7100_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM)
#define IC7100_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM|RIG_SCAN_SLCT|RIG_SCAN_PRIO)
#define IC7100_VFO_OPS (RIG_OP_FROM_VFO| \
RIG_OP_TO_VFO| \
RIG_OP_CPY| \
RIG_OP_MCL| \
RIG_OP_XCHG| \
RIG_OP_TUNE)
#define IC7100_FUNC_ALL (RIG_FUNC_FAGC| \
RIG_FUNC_NB| \
RIG_FUNC_NR| \
RIG_FUNC_ANF| \
RIG_FUNC_TONE| \
RIG_FUNC_TSQL| \
RIG_FUNC_COMP| \
RIG_FUNC_VOX| \
RIG_FUNC_FBKIN| \
RIG_FUNC_AFC| \
RIG_FUNC_SATMODE| \
RIG_FUNC_VSC| \
RIG_FUNC_MN| \
RIG_FUNC_LOCK| \
RIG_FUNC_SCOPE)
#define IC7100_LEVEL_ALL (RIG_LEVEL_AF| \
RIG_LEVEL_RF| \
RIG_LEVEL_SQL| \
RIG_LEVEL_IF| \
RIG_LEVEL_NR| \
RIG_LEVEL_CWPITCH| \
RIG_LEVEL_RFPOWER| \
RIG_LEVEL_MICGAIN| \
RIG_LEVEL_KEYSPD| \
RIG_LEVEL_COMP| \
RIG_LEVEL_VOXGAIN| \
RIG_LEVEL_VOXDELAY| \
RIG_LEVEL_ANTIVOX| \
RIG_LEVEL_APF| \
RIG_LEVEL_AGC| \
RIG_LEVEL_PBT_IN| \
RIG_LEVEL_PBT_OUT| \
RIG_LEVEL_NOTCHF| \
RIG_LEVEL_ATT| \
RIG_LEVEL_PREAMP)
#define IC7100_PARM_ALL (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
#define IC7100_STR_CAL UNKNOWN_IC_STR_CAL /* FIXME */
#define IC7100_HF_ANTS (RIG_ANT_1|RIG_ANT_2)
/*
*/
static const struct icom_priv_caps ic7100_priv_caps = {
0x88, /* default address */
0, /* 731 mode */
ic7100_ts_sc_list, /* FIXME */
};
const struct rig_caps ic7100_caps = {
.rig_model = RIG_MODEL_IC7100,
.model_name = "IC-7100",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_SERIAL_CAT,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = IC7100_FUNC_ALL,
.has_set_func = IC7100_FUNC_ALL | RIG_FUNC_RESUME,
.has_get_level = IC7100_LEVEL_ALL | RIG_LEVEL_RAWSTR| RIG_LEVEL_SWR,
.has_set_level = IC7100_LEVEL_ALL,
.has_get_parm = IC7100_PARM_ALL,
.has_set_parm = IC7100_PARM_ALL,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = {20, RIG_DBLST_END, },
.attenuator = {20, RIG_DBLST_END, },
.max_rit = kHz(9.999),
.max_xit = kHz(9.999),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC7100_VFO_OPS,
.scan_ops = IC7100_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 9, /* TODO */
.chan_list = { /* TBC */
{ 1, 396, RIG_MTYPE_MEM },
{ 397, 400, RIG_MTYPE_CALL },
{ 401, 424, RIG_MTYPE_EDGE },
RIG_CHAN_END, },
.rx_range_list1 = { /* Europe */
{kHz(30),MHz(60),IC7100_MODES,-1,-1,IC7100_VFO_ALL,IC7100_HF_ANTS},
{kHz(136),MHz(174),IC7100_MODES,-1,-1,IC7100_VFO_ALL,RIG_ANT_3},
{MHz(420),MHz(480),IC7100_MODES,-1,-1,IC7100_VFO_ALL,RIG_ANT_4},
{MHz(1240),MHz(1320),IC7100_MODES,-1,-1,IC7100_VFO_ALL,RIG_ANT_5},
RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1,IC7100_OTHER_TX_MODES, W(2),W(100),IC7100_VFO_ALL,IC7100_HF_ANTS),
FRQ_RNG_HF(1,RIG_MODE_AM, W(2),W(25),IC7100_VFO_ALL,IC7100_HF_ANTS), /* only HF */
FRQ_RNG_6m(1,IC7100_OTHER_TX_MODES, W(2),W(100),IC7100_VFO_ALL,IC7100_HF_ANTS),
FRQ_RNG_2m(1,IC7100_OTHER_TX_MODES, W(2),W(100),IC7100_VFO_ALL,RIG_ANT_3),
FRQ_RNG_70cm(1,IC7100_OTHER_TX_MODES, W(2),W(75),IC7100_VFO_ALL,RIG_ANT_4),
/* option */
FRQ_RNG_23cm_REGION1(IC7100_OTHER_TX_MODES, W(1),W(10),IC7100_VFO_ALL,RIG_ANT_5),
RIG_FRNG_END, },
.rx_range_list2 = { /* USA */
{kHz(30),MHz(60),IC7100_MODES,-1,-1,IC7100_VFO_ALL,IC7100_HF_ANTS},
{kHz(136),MHz(174),IC7100_MODES,-1,-1,IC7100_VFO_ALL,RIG_ANT_3},
{MHz(420),MHz(480),IC7100_MODES,-1,-1,IC7100_VFO_ALL,RIG_ANT_4},
{MHz(1240),MHz(1320),IC7100_MODES,-1,-1,IC7100_VFO_ALL,RIG_ANT_5},
RIG_FRNG_END, },
.tx_range_list2 = {
FRQ_RNG_HF(2,IC7100_OTHER_TX_MODES, W(2),W(100),IC7100_VFO_ALL,IC7100_HF_ANTS),
FRQ_RNG_HF(2,RIG_MODE_AM, W(2),W(25),IC7100_VFO_ALL,IC7100_HF_ANTS), /* only HF */
/* USA only, TBC: end of range and modes */
{MHz(5.255),MHz(5.405),IC7100_OTHER_TX_MODES,W(2),W(100),IC7100_VFO_ALL,IC7100_HF_ANTS}, /* USA only */
{MHz(5.255),MHz(5.405),RIG_MODE_AM,W(2),W(100),IC7100_VFO_ALL,IC7100_HF_ANTS}, /* USA only */
FRQ_RNG_6m(2,IC7100_OTHER_TX_MODES, W(2),W(100),IC7100_VFO_ALL,IC7100_HF_ANTS),
FRQ_RNG_2m(2,IC7100_OTHER_TX_MODES, W(2),W(100),IC7100_VFO_ALL,RIG_ANT_3),
FRQ_RNG_70cm(2,IC7100_OTHER_TX_MODES, W(2),W(75),IC7100_VFO_ALL,RIG_ANT_4),
/* option */
FRQ_RNG_23cm_REGION2(IC7100_OTHER_TX_MODES, W(1),W(10),IC7100_VFO_ALL,RIG_ANT_5),
RIG_FRNG_END, },
.tuning_steps = {
{RIG_MODE_SSB|RIG_MODE_CW,1},
{RIG_MODE_SSB|RIG_MODE_CW,10},
{RIG_MODE_SSB|RIG_MODE_CW,50},
{RIG_MODE_SSB|RIG_MODE_CW,100},
{RIG_MODE_FM,kHz(0.1)},
{RIG_MODE_FM,kHz(5)},
{RIG_MODE_FM,kHz(6.25)},
{RIG_MODE_FM,kHz(10)},
{RIG_MODE_FM,kHz(12.5)},
{RIG_MODE_FM,kHz(20)},
{RIG_MODE_FM,kHz(25)},
{RIG_MODE_FM,kHz(100)},
RIG_TS_END, },
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW | RIG_MODE_SSB | RIG_MODE_RTTY, kHz(2.4)}, /* builtin */
{RIG_MODE_CW | RIG_MODE_RTTY, Hz(500)},
{RIG_MODE_FM, kHz(15)}, /* builtin */
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)}, /* builtin */
RIG_FLT_END, },
.str_cal = IC7100_STR_CAL,
.priv = (void*)&ic7100_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.get_freq = icom_get_freq,
.set_freq = icom_set_freq,
.get_mode = icom_get_mode,
.set_mode = icom_set_mode,
.get_vfo = NULL,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.get_ts = icom_get_ts,
.set_ts = icom_set_ts,
.get_func = icom_get_func,
.set_func = icom_set_func,
.get_level = icom_get_level,
.set_level = icom_set_level,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.set_rit = icom_set_rit,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_code,
.get_dcs_sql = icom_get_dcs_code,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
.decode_event = icom_decode_event,
.set_split_vfo = icom_set_split_vfo,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
};
/* end of file */

20
icom/icom.c
Wyświetl plik

@ -193,6 +193,23 @@ const struct ts_sc_list ic7000_ts_sc_list[] = {
{ 0, 0 }, { 0, 0 },
}; };
const struct ts_sc_list ic7100_ts_sc_list[] = {
{ 10, 0x00 },
{ 100, 0x01 },
{ kHz(1), 0x02 },
{ kHz(5), 0x03 },
{ kHz(6.25), 0x04 },
{ kHz(9), 0x05 },
{ kHz(10), 0x06 },
{ kHz(12.5), 0x07 },
{ kHz(20), 0x08 },
{ kHz(25), 0x09 },
{ kHz(50), 0x0A },
{ kHz(100), 0x0B },
{ MHz(1), 0x0C },
{ 0, 0x00 },
};
const struct ts_sc_list ic7200_ts_sc_list[] = { const struct ts_sc_list ic7200_ts_sc_list[] = {
{ 10, 0x00 }, { 10, 0x00 },
{ 100, 0x01 }, { 100, 0x01 },
@ -315,6 +332,7 @@ static const struct icom_addr icom_addr_list[] = {
{ RIG_MODEL_OS535, 0x80 }, /* same address as IC-7410 */ { RIG_MODEL_OS535, 0x80 }, /* same address as IC-7410 */
{ RIG_MODEL_ICID1, 0x01 }, { RIG_MODEL_ICID1, 0x01 },
{ RIG_MODEL_IC7000, 0x70 }, { RIG_MODEL_IC7000, 0x70 },
{ RIG_MODEL_IC7100, 0x88 },
{ RIG_MODEL_IC7200, 0x76 }, { RIG_MODEL_IC7200, 0x76 },
{ RIG_MODEL_IC7700, 0x74 }, { RIG_MODEL_IC7700, 0x74 },
{ RIG_MODEL_NONE, 0 }, { RIG_MODEL_NONE, 0 },
@ -1403,6 +1421,7 @@ int icom_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
retval = icom_transaction (rig, C_CTL_PTT, S_PTT, NULL, 0, retval = icom_transaction (rig, C_CTL_PTT, S_PTT, NULL, 0,
pttbuf, &ptt_len); pttbuf, &ptt_len);
if (retval != RIG_OK) if (retval != RIG_OK)
return retval; return retval;
@ -3266,6 +3285,7 @@ DECLARE_INITRIG_BACKEND(icom)
rig_register(&ic78_caps); rig_register(&ic78_caps);
rig_register(&ic7800_caps); rig_register(&ic7800_caps);
rig_register(&ic7000_caps); rig_register(&ic7000_caps);
rig_register(&ic7100_caps);
rig_register(&ic7200_caps); rig_register(&ic7200_caps);
rig_register(&ic781_caps); rig_register(&ic781_caps);
rig_register(&ic707_caps); rig_register(&ic707_caps);

2
icom/icom.h
Wyświetl plik

@ -129,6 +129,7 @@ extern const struct ts_sc_list ic756_ts_sc_list[];
extern const struct ts_sc_list ic756pro_ts_sc_list[]; extern const struct ts_sc_list ic756pro_ts_sc_list[];
extern const struct ts_sc_list ic706_ts_sc_list[]; extern const struct ts_sc_list ic706_ts_sc_list[];
extern const struct ts_sc_list ic7000_ts_sc_list[]; extern const struct ts_sc_list ic7000_ts_sc_list[];
extern const struct ts_sc_list ic7100_ts_sc_list[];
extern const struct ts_sc_list ic7200_ts_sc_list[]; extern const struct ts_sc_list ic7200_ts_sc_list[];
extern const struct ts_sc_list ic910_ts_sc_list[]; extern const struct ts_sc_list ic910_ts_sc_list[];
extern const struct ts_sc_list ic718_ts_sc_list[]; extern const struct ts_sc_list ic718_ts_sc_list[];
@ -218,6 +219,7 @@ extern const struct rig_caps ic775_caps;
extern const struct rig_caps ic78_caps; extern const struct rig_caps ic78_caps;
extern const struct rig_caps ic7800_caps; extern const struct rig_caps ic7800_caps;
extern const struct rig_caps ic7000_caps; extern const struct rig_caps ic7000_caps;
extern const struct rig_caps ic7100_caps;
extern const struct rig_caps ic7200_caps; extern const struct rig_caps ic7200_caps;
extern const struct rig_caps ic781_caps; extern const struct rig_caps ic781_caps;
extern const struct rig_caps ic820h_caps; extern const struct rig_caps ic820h_caps;

3
include/hamlib/rig.h
Wyświetl plik

@ -418,7 +418,8 @@ typedef enum {
RIG_PTT_SERIAL_RTS, /*!< PTT control through serial RTS signal */ RIG_PTT_SERIAL_RTS, /*!< PTT control through serial RTS signal */
RIG_PTT_PARALLEL, /*!< PTT control through parallel port */ RIG_PTT_PARALLEL, /*!< PTT control through parallel port */
RIG_PTT_RIG_MICDATA, /*!< Legacy PTT, supports RIG_PTT_ON_MIC/RIG_PTT_ON_DATA */ RIG_PTT_RIG_MICDATA, /*!< Legacy PTT, supports RIG_PTT_ON_MIC/RIG_PTT_ON_DATA */
RIG_PTT_CM108 /*!< PTT control through CM108 GPIO pin */ RIG_PTT_CM108, /*!< PTT control through CM108 GPIO pin */
RIG_PTT_SERIAL_CAT /*!< PTT control through serial command sequence*/
} ptt_type_t; } ptt_type_t;
/** /**

3
include/hamlib/riglist.h
Wyświetl plik

@ -203,7 +203,8 @@
#define RIG_MODEL_IC7410 RIG_MAKE_MODEL(RIG_ICOM, 67) #define RIG_MODEL_IC7410 RIG_MAKE_MODEL(RIG_ICOM, 67)
#define RIG_MODEL_IC9100 RIG_MAKE_MODEL(RIG_ICOM, 68) #define RIG_MODEL_IC9100 RIG_MAKE_MODEL(RIG_ICOM, 68)
#define RIG_MODEL_ICRX7 RIG_MAKE_MODEL(RIG_ICOM, 69) #define RIG_MODEL_ICRX7 RIG_MAKE_MODEL(RIG_ICOM, 69)
/* next one is 70 */ #define RIG_MODEL_IC7100 RIG_MAKE_MODEL(RIG_ICOM, 70)
/* next one is 71 */
/* /*
* Optoelectronics (CI-V) * Optoelectronics (CI-V)

9
src/rig.c
Wyświetl plik

@ -496,6 +496,7 @@ int HAMLIB_API rig_open(RIG *rig)
case RIG_PTT_NONE: case RIG_PTT_NONE:
case RIG_PTT_RIG: case RIG_PTT_RIG:
case RIG_PTT_RIG_MICDATA: case RIG_PTT_RIG_MICDATA:
case RIG_PTT_SERIAL_CAT:
break; break;
case RIG_PTT_SERIAL_RTS: case RIG_PTT_SERIAL_RTS:
case RIG_PTT_SERIAL_DTR: case RIG_PTT_SERIAL_DTR:
@ -675,6 +676,7 @@ int HAMLIB_API rig_close(RIG *rig)
case RIG_PTT_NONE: case RIG_PTT_NONE:
case RIG_PTT_RIG: case RIG_PTT_RIG:
case RIG_PTT_RIG_MICDATA: case RIG_PTT_RIG_MICDATA:
case RIG_PTT_SERIAL_CAT:
break; break;
case RIG_PTT_SERIAL_RTS: case RIG_PTT_SERIAL_RTS:
ser_set_rts(&rs->pttport, RIG_PTT_OFF); ser_set_rts(&rs->pttport, RIG_PTT_OFF);
@ -1207,7 +1209,6 @@ int HAMLIB_API rig_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
return -RIG_EINVAL; return -RIG_EINVAL;
caps = rig->caps; caps = rig->caps;
switch (rig->state.pttport.type.ptt) { switch (rig->state.pttport.type.ptt) {
case RIG_PTT_RIG: case RIG_PTT_RIG:
if (ptt == RIG_PTT_ON_MIC || ptt == RIG_PTT_ON_DATA) if (ptt == RIG_PTT_ON_MIC || ptt == RIG_PTT_ON_DATA)
@ -1240,6 +1241,12 @@ int HAMLIB_API rig_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
case RIG_PTT_SERIAL_RTS: case RIG_PTT_SERIAL_RTS:
return ser_set_rts(&rig->state.pttport, ptt!=RIG_PTT_OFF); return ser_set_rts(&rig->state.pttport, ptt!=RIG_PTT_OFF);
case RIG_PTT_SERIAL_CAT:
if (ptt == RIG_PTT_ON_MIC || ptt == RIG_PTT_ON_DATA)
ptt = RIG_PTT_ON;
retcode = caps->set_ptt(rig, vfo, ptt);
return retcode;
case RIG_PTT_PARALLEL: case RIG_PTT_PARALLEL:
return par_ptt_set(&rig->state.pttport, ptt); return par_ptt_set(&rig->state.pttport, ptt);