From e109fe355d0fb4f1da9fc0dcb3dc5a304f08a771 Mon Sep 17 00:00:00 2001 From: Daniele Forsi IU5HKX Date: Wed, 5 Mar 2025 22:28:14 +0100 Subject: [PATCH] Fix typos --- doc/man1/rigctl.1 | 11 ++++------- doc/man1/rigctld.1 | 30 ++++++++++++------------------ 2 files changed, 16 insertions(+), 25 deletions(-) diff --git a/doc/man1/rigctl.1 b/doc/man1/rigctl.1 index e8ce4e31a..95c7bbddd 100644 --- a/doc/man1/rigctl.1 +++ b/doc/man1/rigctl.1 @@ -335,7 +335,7 @@ Sets the cookie to be used for remote access security . .TP .BR \-# ", " \-\-skip_init -Skips most startup intialization. +Skips most startup initialization. . .TP .B \- @@ -701,7 +701,7 @@ and .IP Number is 1-based antenna# (\(oq1\(cq, \(oq2\(cq, \(oq3\(cq, ...). .IP -Option depends on rig..for Icom it probably sets the Tx & Rx antennas as in the IC-7851. See your manual for rig specific option values. Most rigs don't care about the option. +Option depends on rig. For Icom it probably sets the Tx & Rx antennas as in the IC-7851. See your manual for rig specific option values. Most rigs don't care about the option. .IP For the IC-7851, FTDX3000 (and perhaps others) it means this: .IP @@ -727,7 +727,7 @@ A value of 0 for Antenna will return the current TX antenna .IP -Option returned depends on rig..for Icom is likely the RX only flag. +Option returned depends on rig. For Icom it is likely the RX only flag. . .TP .BR b ", " send_morse " \(aq" \fIMorse\fP \(aq @@ -828,7 +828,7 @@ code. .BR 0x93 ", " get_dcs_sql Get .RI \(aq "DCS Sql" \(aq - code. +code. . .TP .BR N ", " set_ts " \(aq" "\fITuning Step\fP" \(aq @@ -1138,7 +1138,6 @@ Sets memory channel information Get channel memory. .IP If readonly!=0 then only channel data is returned and rig remains on the current channel. If readonly=0 then rig will be set to the channel requested. -data. . .TP .BR A ", " set_trn " \(aq" \fITransceive\fP \(aq @@ -1465,8 +1464,6 @@ When skip!=0 skips setting freq on TX_VFO when in RX and on RX_VFO when in TX -- . .SH READLINE . -.SH READLINE -. If .B Readline library development files are found at configure time, diff --git a/doc/man1/rigctld.1 b/doc/man1/rigctld.1 index b42b83066..9c22bd619 100644 --- a/doc/man1/rigctld.1 +++ b/doc/man1/rigctld.1 @@ -112,7 +112,7 @@ Here is a summary of the supported options: .BR \-m ", " \-\-model = \fIid\fP Select radio model number. Defaults to dummy device. .IP -See model list (use \(lqrigctl -l\(rq). +See model list (use \(lqrigctld -l\(rq). .IP .BR Note : .B rigctl @@ -256,7 +256,7 @@ rigctl -m 2 ip6-localhost Exceptions: .EX rigctl -m 2 -r 127.0.0.1 (only works if localhost is IPV4 address) -rigctl -m 2 -r ::1 (only works localhost is IPV6 address) +rigctl -m 2 -r ::1 (only works if localhost is IPV6 address) .EE .in . @@ -345,7 +345,7 @@ Windows. The output can be piped to .BR more (1) or .BR less (1), -e.g. \(lqrigctl -l | more\(rq. +e.g. \(lqrigctld -l | more\(rq. . .TP .BR \-o ", " \-\-vfo @@ -375,12 +375,12 @@ Should only be needed when controlling software should be "paused" so you can move the VFO. Continuous movement extends the timeout. . .TP -.BR \-x ", " \-\-uplink=option +.BR \-x ", " \-\-uplink = \fIoption\fP 1=Sub, 2=Main .IP For GPredict use to ignore get_freq for Sub or Main uplink VFO. .IP -Should allow downlink VFO movement without confusing GPredict or the uplink +Should allow downlink VFO movement without confusing GPredict or the uplink. . .TP .BR \-Z ", " \-\-debug\-time\-stamps @@ -703,7 +703,7 @@ Set number (\(oq0\(cq, \(oq1\(cq, \(oq2\(cq, ...). .IP .IP -Option depends on rig..for Icom it probably sets the Tx & Rx antennas as in the IC-7851. See your manual for rig specific option values. Most rigs don't care about the option. +Option depends on rig. For Icom it probably sets the Tx & Rx antennas as in the IC-7851. See your manual for rig specific option values. Most rigs don't care about the option. .IP For the IC-7851 (and perhaps others) it means this: .IP @@ -739,7 +739,7 @@ Stop sending the current morse code. . .TP .BR 0xbc ", " wait_morse " -Wait for morse to finish -- only works on full break-in +Wait for morse to finish -- only works on full break-in. . .TP .BR 0x94 ", " send_voice_mem " \(aq" \fIMsgnum\fP \(aq @@ -823,7 +823,7 @@ code. .BR 0x93 ", " get_dcs_sql Get .RI \(aq "DCS Sql" \(aq - code. +code. . .TP .BR N ", " set_ts " \(aq" "\fITuning Step\fP" \(aq @@ -882,7 +882,7 @@ Set and .RI \(aq "Level Value" \(aq. .IP -evel is a token: \(oqPREAMP\(cq, \(oqATT\(cq, \(oqVOXDELAY\(cq, \(oqAF\(cq, +Level is a token: \(oqPREAMP\(cq, \(oqATT\(cq, \(oqVOXDELAY\(cq, \(oqAF\(cq, \(oqRF\(cq, \(oqSQL\(cq, \(oqIF\(cq, \(oqAPF\(cq, \(oqNR\(cq, \(oqPBT_IN\(cq, \(oqPBT_OUT\(cq, \(oqCWPITCH\(cq, \(oqRFPOWER\(cq, \(oqMICGAIN\(cq, \(oqKEYSPD\(cq, \(oqNOTCHF\(cq, \(oqCOMP\(cq, \(oqAGC\(cq, \(oqBKINDL\(cq, @@ -1013,7 +1013,6 @@ Not implemented yet. Get channel memory. .IP If readonly!=0 then only channel data is returned and rig remains on the current channel. If readonly=0 then rig will be set to the channel requested. -data. . .TP .BR A ", " set_trn " \(aq" \fITransceive\fP \(aq @@ -1021,7 +1020,7 @@ Set .RI \(aq Transceive \(aq mode. .IP -Transcieve is a token: \(oqOFF\(cq, \(oqRIG\(cq, \(oqPOLL\(cq. +Transceive is a token: \(oqOFF\(cq, \(oqRIG\(cq, \(oqPOLL\(cq. .IP Transceive is a mechanism for radios to report events without a specific call for information. @@ -1220,16 +1219,11 @@ Examples: .TP .BR client_version " \(aq" \fIString\fP "\(aq .EX - Client can send its version to rigctld and get feedback on compatibility, deprecation, and alternatives +Client can send its version to rigctld and get feedback on compatibility, deprecation, and alternatives .TP .BR hamlib_version .EX -Returns hamlib version with ISO8601 date/time -. -.TP -.BR hamlib_version -.EX -Returns hamlib version with ISO8601 date/time +Returns Hamlib version with ISO8601 date/time . .TP .BR test