Clean up simft847.c

At least make get/set freq and mode work.

simulators/simft847.c

@@ -13,18 +13,19 @@ struct ip_mreq
 #include <fcntl.h>
 #include <string.h>
 #include <unistd.h>
-#include "../include/hamlib/rig.h"
+//#include "../include/hamlib/rig.h"
 
 #define BUFSIZE 256
 
-float freqA = 14074000;
+/* In hono(u)r of the 10Hz resolution of the FT-847, vfo frequencies
-float freqB = 14074500;
+ *   are stored in decaHertz(daHz)
-char tx_vfo = '0';
+ */
-char rx_vfo = '0';
+int freqs[4] = {1407400, 43510000, 43720000, 0};
-char modeA = '1';
+int modes[4] = {0x01, 0x02, 0x02, 0};
-char modeB = '1';
+char *vfoNames[4] = {"Main", "SAT Rx", "SAT Tx", "Bogus"};
 int width_main = 500;
 int width_sub = 700;
+int vfo;
 
 
 int
@@ -89,7 +90,7 @@ int openPort(char *comport) // doesn't matter for using pts devices
 int main(int argc, char *argv[])
 {
     unsigned char buf[256];
-    int n;
+    int freq, i, n;
 
 
 again:
@@ -109,6 +110,7 @@ again:
         {
             printf("Not 5 bytes?  bytes=%d\n", bytes);
         }
+        n = 0;
 
         switch (buf[4])
         {
@@ -120,7 +122,11 @@ again:
 
         case 0x88: printf("PTT OFF\n"); break;
 
-        case 0x07: printf("MODE\n"); break;
+        case 0x07:
+        case 0x17:
+        case 0x27:
+            modes[(buf[4] & 0x30) >> 4] = buf[0];
+            printf("MODE\n"); break;
 
         case 0x05: printf("CLAR ON\n"); break;
 
@@ -148,13 +154,33 @@ again:
 
         case 0xF7: printf("READ TX STATUS\n"); break;
 
+        case 0x01:
+        case 0x11:
+        case 0x21:
+            freq = 0;
+            for (i = 0; i < 4; i++)
+            {
+                freq = freq * 100 + (((buf[i] & 0xf0) * 5) / 8) + (buf[i] & 0x0f);
+            }
+            freqs[(buf[4] & 0x30) >> 4] = freq;
+            printf("FREQ SET = %d\n", freq * 10);
+            break;
+
         case 0x03:
+        case 0x13:
+        case 0x23:
             printf("READ RX STATUS\n");
-            buf[0] = 0x01;
+            vfo = (buf[4] & 0x30) >> 4;
-            buf[1] = 0x40;
+            freq = freqs[vfo];
-            buf[2] = 0x74;
+            for (i = 3; i >= 0; i--)
-            buf[3] = 0x00;
+            {
-            buf[4] = 0x03; n = write(fd, buf, 5);
+                buf[i] = freq % 10;
+                freq /= 10;
+                buf[i] += (freq % 10) << 4;
+                freq /= 10;
+            }
+            buf[4] = modes[vfo];
+            n = write(fd, buf, 5);
             break;
 
         case 0xbb: buf[0] = buf[1] = 0; printf("READ EPROM\n"); n = write(fd, buf, 2);
@@ -162,6 +188,7 @@ again:
 
         default: printf("Unknown cmd=%02x\n", buf[4]);
         }
+        if (n < 0) {printf("Write failed - n = %d\n", n); }
     }
 
     return 0;