Add cross references hash mark for Doxygen

include/hamlib/rig.h

@@ -744,7 +744,7 @@ typedef enum {
  * NOTE: the vfo argument for some vfo operation may be irrelevant,
  * and thus will be ignored.
  *
- * The VFO/MEM "mode" is set by rig_set_vfo.\n
+ * The VFO/MEM "mode" is set by #rig_set_vfo.\n
  * \c STRING used in rigctl
  *
  * \sa rig_parse_vfo_op(), rig_strvfop()
@@ -1065,10 +1065,10 @@ typedef uint64_t rig_level_e;
 #define RIG_LEVEL_KEYSPD     CONSTANT_64BIT_FLAG(14)      /*!< \c KEYSPD -- Key Speed, arg int (WPM) */
 #define RIG_LEVEL_NOTCHF     CONSTANT_64BIT_FLAG(15)      /*!< \c NOTCHF -- Notch Freq., arg int (Hz) */
 #define RIG_LEVEL_COMP       CONSTANT_64BIT_FLAG(16)      /*!< \c COMP -- Compressor, arg float [0.0 ... 1.0] */
-#define RIG_LEVEL_AGC        CONSTANT_64BIT_FLAG(17)      /*!< \c AGC -- AGC, arg int (see enum agc_level_e) */
+#define RIG_LEVEL_AGC        CONSTANT_64BIT_FLAG(17)      /*!< \c AGC -- AGC, arg int (see enum #agc_level_e) */
 #define RIG_LEVEL_BKINDL     CONSTANT_64BIT_FLAG(18)      /*!< \c BKINDL -- BKin Delay, arg int (tenth of dots) */
 #define RIG_LEVEL_BALANCE    CONSTANT_64BIT_FLAG(19)      /*!< \c BAL -- Balance (Dual Watch) arg float [0.0 ... 1.0] */
-#define RIG_LEVEL_METER      CONSTANT_64BIT_FLAG(20)      /*!< \c METER -- Display meter, arg int (see enum meter_level_e) */
+#define RIG_LEVEL_METER      CONSTANT_64BIT_FLAG(20)      /*!< \c METER -- Display meter, arg int (see enum #meter_level_e) */
 #define RIG_LEVEL_VOXGAIN    CONSTANT_64BIT_FLAG(21)      /*!< \c VOXGAIN -- VOX gain level, arg float [0.0 ... 1.0] */
 #define RIG_LEVEL_ANTIVOX    CONSTANT_64BIT_FLAG(22)      /*!< \c ANTIVOX -- anti-VOX level, arg float [0.0 ... 1.0] */
 #define RIG_LEVEL_SLOPE_LOW  CONSTANT_64BIT_FLAG(23)      /*!< \c SLOPE_LOW -- Slope tune, low frequency cut, arg int (Hz) */
@@ -1091,7 +1091,7 @@ typedef uint64_t rig_level_e;
 #define RIG_LEVEL_MONITOR_GAIN CONSTANT_64BIT_FLAG(37)      /*!< \c MONITOR_GAIN -- Monitor gain (level for monitoring of transmitted audio) arg float [0.0 ... 1.0] */
 #define RIG_LEVEL_NB           CONSTANT_64BIT_FLAG(38)      /*!< \c NB -- Noise Blanker level, arg float [0.0 ... 1.0] */
 #define RIG_LEVEL_RFPOWER_METER_WATTS  CONSTANT_64BIT_FLAG(39)      /*!< \c RFPOWER_METER_WATTS -- RF power output meter, arg float [0.0 ... MAX] (output power in watts) */
-#define RIG_LEVEL_SPECTRUM_MODE        CONSTANT_64BIT_FLAG(40)      /*!< \c SPECTRUM_MODE -- Spectrum scope mode, arg int (see enum rig_spectrum_mode_e). Supported modes defined in rig caps. */
+#define RIG_LEVEL_SPECTRUM_MODE        CONSTANT_64BIT_FLAG(40)      /*!< \c SPECTRUM_MODE -- Spectrum scope mode, arg int (see enum #rig_spectrum_mode_e). Supported modes defined in rig caps. */
 #define RIG_LEVEL_SPECTRUM_SPAN        CONSTANT_64BIT_FLAG(41)      /*!< \c SPECTRUM_SPAN -- Spectrum scope span in center mode, arg int (Hz). Supported spans defined in rig caps. */
 #define RIG_LEVEL_SPECTRUM_EDGE_LOW    CONSTANT_64BIT_FLAG(42)      /*!< \c SPECTRUM_EDGE_LOW -- Spectrum scope low edge in fixed mode, arg int (Hz) */
 #define RIG_LEVEL_SPECTRUM_EDGE_HIGH   CONSTANT_64BIT_FLAG(43)      /*!< \c SPECTRUM_EDGE_HIGH -- Spectrum scope high edge in fixed mode, arg int (Hz) */
@@ -1136,7 +1136,7 @@ typedef uint64_t rig_level_e;
  */
 enum rig_parm_e {
     RIG_PARM_NONE =         0,          /*!< '' -- No Parm */
-    RIG_PARM_ANN =          (1 << 0),   /*!< \c ANN -- "Announce" level, see ann_t */
+    RIG_PARM_ANN =          (1 << 0),   /*!< \c ANN -- "Announce" level, see #ann_t */
     RIG_PARM_APO =          (1 << 1),   /*!< \c APO -- Auto power off, int in minute */
     RIG_PARM_BACKLIGHT =    (1 << 2),   /*!< \c BACKLIGHT -- LCD light, float [0.0 ... 1.0] */
     RIG_PARM_BEEP =         (1 << 4),   /*!< \c BEEP -- Beep on keypressed, int (0,1) */
@@ -1696,7 +1696,7 @@ typedef enum {
 struct chan_list {
     int startc;              /*!< Starting memory channel \b number */
     int endc;                /*!< Ending memory channel \b number */
-    chan_type_t type;        /*!< Memory type. see chan_type_t */
+    chan_type_t type;        /*!< Memory type. See #chan_type_t */
     channel_cap_t mem_caps;  /*!< Definition of attributes that can be stored/retrieved */
 };
 

src/extamp.c

@@ -259,7 +259,7 @@ const struct confparams *HAMLIB_API amp_ext_lookup_tok(AMP *amp,
  * \note As this function calls amp_ext_lookup(), it can be considered a
  * higher level API.
  *
- * \return The token ID or RIG_CONF_END if there is a lookup failure.
+ * \return The token ID or #RIG_CONF_END if there is a lookup failure.
  *
  * \sa amp_ext_lookup()
  */

src/rig.c

@@ -6893,8 +6893,8 @@ int HAMLIB_API rig_set_powerstat(RIG *rig, powerstat_t status)
  * \param rig   The rig handle
  * \param status    The location where to store the current status
  *
- *  Retrieve the status of the radio. See RIG_POWER_ON, RIG_POWER_OFF and
+ *  Retrieve the status of the radio. See #RIG_POWER_ON, #RIG_POWER_OFF and
- *  RIG_POWER_STANDBY defines for the \a status.
+ *  #RIG_POWER_STANDBY defines for the \a status.
  *
  * \return RIG_OK if the operation has been successful, otherwise
  * a negative value if an error occurred (in which case, cause is

src/rot_ext.c

@@ -362,7 +362,7 @@ const struct confparams *HAMLIB_API rot_ext_lookup_tok(ROT *rot,
  * \note As this function calls rot_ext_lookup(), it can be considered a
  * higher level API.
  *
- * \return The token ID or RIG_CONF_END if there is a lookup failure.
+ * \return The token ID or #RIG_CONF_END if there is a lookup failure.
  *
  * \sa rot_ext_lookup()
  */