update to libtool 1.5.26 Debian 1.5.26-1ubuntu1 (1.1220.2.493 2008/02/01 16:58:18)

git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2673 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-03-05 21:08:41 +00:00 · 2009-03-05 21:08:41 +00:00 · d3b837ab9c
commit d3b837ab9c
--- a/libltdl/COPYING.LIB
+++ b/libltdl/COPYING.LIB
@ -3,7 +3,7 @@
                       Version 2.1, February 1999

 Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

@ -90,8 +90,9 @@ special circumstances.

  For example, on rare occasions, there may be a special need to
 encourage the widest possible use of a certain library, so that it
-becomes a de-facto standard.  To achieve this, non-free programs must
-be allowed to use the library.  A more frequent case is that a free
+becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
 library does the same job as widely used non-free libraries.  In this
 case, there is little to gain by limiting the free library to free
 software only, so we use the Lesser General Public License.
@ -139,7 +140,8 @@ included without limitation in the term "modification".)
 making modifications to it.  For a library, complete source code means
 all the source code for all modules it contains, plus any associated
 interface definition files, plus the scripts used to control
-compilation and installation of the library.
+compilation
+and installation of the library.

  Activities other than copying, distribution and modification are not
 covered by this License; they are outside its scope.  The act of
@ -305,10 +307,10 @@ of these things:
    the user installs one, as long as the modified version is
    interface-compatible with the version that the work was made with.

-    c) Accompany the work with a written offer, valid for at least
-    three years, to give the same user the materials specified in
-    Subsection 6a, above, for a charge no more than the cost of
-    performing this distribution.
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.

    d) If distribution of the work is made by offering access to copy
    from a designated place, offer equivalent access to copy the above
@ -475,13 +477,14 @@ have at least the "copyright" line and a pointer to where the full
 notice is found.


-    <one line to give the library's name and a brief idea of what it does.>
+    <one line to give the library's name and a brief idea of what it
+does.>
    Copyright (C) <year>  <name of author>

    This library is free software; you can redistribute it and/or
    modify it under the terms of the GNU Lesser General Public
    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
+    version 2 of the License, or (at your option) any later version.

    This library is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
@ -490,17 +493,19 @@ notice is found.

    You should have received a copy of the GNU Lesser General Public
    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307  USA
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA

-Also add information on how to contact you by electronic and paper mail.
+Also add information on how to contact you by electronic and paper
+mail.

 You should also get your employer (if you work as a programmer) or
-your school, if any, to sign a "copyright disclaimer" for the library,
-if necessary.  Here is a sample; alter the names:
+your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:

  Yoyodyne, Inc., hereby disclaims all copyright interest in the
  library `Frob' (a library for tweaking knobs) written by James
-  Random Hacker.
+Random Hacker.

  <signature of Ty Coon>, 1 April 1990
  Ty Coon, President of Vice
--- a/libltdl/Makefile.am
+++ b/libltdl/Makefile.am
@ -18,7 +18,7 @@ endif
 CLEANFILES = libltdl.la libltdlc.la

 libltdl_la_SOURCES = ltdl.c
-libltdl_la_LDFLAGS = -no-undefined -version-info 4:0:1
+libltdl_la_LDFLAGS = -no-undefined -version-info 4:6:1
 libltdl_la_LIBADD = $(LIBADD_DL)

 libltdlc_la_SOURCES = ltdl.c
@ -30,22 +30,3 @@ ltdl.lo: ltdl.h config.h
 $(libltdl_la_OBJECTS) $(libltdlc_la_OBJECTS): libtool
 libtool: $(LIBTOOL_DEPS)
 	$(SHELL) ./config.status --recheck
-
-## This allows us to install libltdl without using ln and without creating
-## a world writeable directory.
-## FIXME:  Remove this rule once automake can do this properly by itself.
-local-install-files: $(DISTFILES)
-	-rm -rf $(DESTDIR)$(datadir)/libtool/libltdl
-	$(mkinstalldirs) $(DESTDIR)$(datadir)/libtool/libltdl
-	@for file in $(DISTFILES); do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$(srcdir)/||"`;; \
-	  esac; \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -r $$d/$$file $(DESTDIR)$(datadir)/libtool/libltdl/$$file; \
-	  else \
-	    test -f $(DESTDIR)$(datadir)/libtool/libltdl/$$file \
-	    || cp $$d/$$file $(DESTDIR)$(datadir)/libtool/libltdl/$$file || :; \
-	  fi; \
-	done
--- a/libltdl/Makefile.in
+++ b/libltdl/Makefile.in
@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
 # @configure_input@

 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@ -15,17 +15,11 @@
@SET_MAKE@


-SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@ -37,22 +31,30 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \
 	$(am__noinst_HEADERS_DIST) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config-h.in \
 	$(top_srcdir)/configure COPYING.LIB config.guess config.sub \
 	install-sh ltmain.sh missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = 
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(mkdir_p)
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
 libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
@ -60,20 +62,26 @@ am__DEPENDENCIES_1 =
 libltdl_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
 am_libltdl_la_OBJECTS = ltdl.lo
 libltdl_la_OBJECTS = $(am_libltdl_la_OBJECTS)
+libltdl_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_la_LDFLAGS) $(LDFLAGS) -o $@
+@INSTALL_LTDL_TRUE@am_libltdl_la_rpath = -rpath $(libdir)
 libltdlc_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
 am_libltdlc_la_OBJECTS = ltdl.lo
 libltdlc_la_OBJECTS = $(am_libltdlc_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+@CONVENIENCE_LTDL_TRUE@am_libltdlc_la_rpath =
+DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp =
 am__depfiles_maybe =
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES)
 DIST_SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES)
 am__include_HEADERS_DIST = ltdl.h
@ -94,8 +102,6 @@ GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AS = @AS@
@ -106,8 +112,6 @@ AWK = @AWK@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
-CONVENIENCE_LTDL_FALSE = @CONVENIENCE_LTDL_FALSE@
-CONVENIENCE_LTDL_TRUE = @CONVENIENCE_LTDL_TRUE@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
 CXX = @CXX@
@ -118,6 +122,7 @@ CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@ -126,9 +131,9 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 F77 = @F77@
 FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
-INSTALL_LTDL_FALSE = @INSTALL_LTDL_FALSE@
-INSTALL_LTDL_TRUE = @INSTALL_LTDL_TRUE@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
@ -140,10 +145,9 @@ LIBTOOL = @LIBTOOL@
 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
@ -154,54 +158,62 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_AS = @ac_ct_AS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_DLLTOOL = @ac_ct_DLLTOOL@
 ac_ct_F77 = @ac_ct_F77@
-ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = no-dependencies foreign
@INSTALL_LTDL_TRUE@include_HEADERS = ltdl.h
@INSTALL_LTDL_TRUE@lib_LTLIBRARIES = libltdl.la
@ -209,7 +221,7 @@ AUTOMAKE_OPTIONS = no-dependencies foreign
@CONVENIENCE_LTDL_TRUE@noinst_LTLIBRARIES = libltdlc.la
 CLEANFILES = libltdl.la libltdlc.la
 libltdl_la_SOURCES = ltdl.c
-libltdl_la_LDFLAGS = -no-undefined -version-info 4:0:1
+libltdl_la_LDFLAGS = -no-undefined -version-info 4:6:1
 libltdl_la_LIBADD = $(LIBADD_DL)
 libltdlc_la_SOURCES = ltdl.c
 libltdlc_la_LIBADD = $(LIBADD_DL)
@ -220,7 +232,7 @@ all: config.h
 .SUFFIXES: .c .lo .o .obj
 am--refresh:
 	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
@ -247,21 +259,21 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck

-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+$(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi

 stamp-h1: $(srcdir)/config-h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config-h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+$(srcdir)/config-h.in:  $(am__configure_deps) 
 	cd $(top_srcdir) && $(AUTOHEADER)
 	rm -f stamp-h1
 	touch $@
@ -270,10 +282,10 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
+	    f=$(am__strip_dir) \
 	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
 	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
@ -282,7 +294,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
+	  p=$(am__strip_dir) \
 	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
 	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
@ -305,9 +317,9 @@ clean-noinstLTLIBRARIES:
 	  rm -f "$${dir}/so_locations"; \
 	done
 libltdl.la: $(libltdl_la_OBJECTS) $(libltdl_la_DEPENDENCIES) 
-	$(LINK) -rpath $(libdir) $(libltdl_la_LDFLAGS) $(libltdl_la_OBJECTS) $(libltdl_la_LIBADD) $(LIBS)
+	$(libltdl_la_LINK) $(am_libltdl_la_rpath) $(libltdl_la_OBJECTS) $(libltdl_la_LIBADD) $(LIBS)
 libltdlc.la: $(libltdlc_la_OBJECTS) $(libltdlc_la_DEPENDENCIES) 
-	$(LINK)  $(libltdlc_la_LDFLAGS) $(libltdlc_la_OBJECTS) $(libltdlc_la_LIBADD) $(LIBS)
+	$(LINK) $(am_libltdlc_la_rpath) $(libltdlc_la_OBJECTS) $(libltdlc_la_LIBADD) $(LIBS)

 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@ -332,13 +344,12 @@ clean-libtool:

 distclean-libtool:
 	-rm -f libtool
-uninstall-info-am:
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
 	@list='$(include_HEADERS)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
 	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
 	done
@ -346,7 +357,7 @@ install-includeHEADERS: $(include_HEADERS)
 uninstall-includeHEADERS:
 	@$(NORMAL_UNINSTALL)
 	@list='$(include_HEADERS)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
 	done
@ -401,24 +412,22 @@ distclean-tags:

 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	$(mkdir_p) $(distdir)
-	$(mkdir_p) $(distdir)/..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@ -432,18 +441,18 @@ distdir: $(DISTFILES)
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)

 dist-bzip2: distdir
-	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)

 dist-tarZ: distdir
-	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)

 dist-shar: distdir
@ -456,7 +465,7 @@ dist-zip: distdir
 	$(am__remove_distdir)

 dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)

 # This target untars the dist file and tries a VPATH configuration.  Then
@ -465,19 +474,19 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
 	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	$(mkdir_p) $(distdir)/_build
-	$(mkdir_p) $(distdir)/_inst
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
@ -494,7 +503,7 @@ distcheck: dist
 	        distuninstallcheck \
 	  && chmod -R a-w "$$dc_install_base" \
 	  && ({ \
-	       (cd ../.. && umask 077 && $(mkdir_p) "$$dc_destdir") \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
@ -507,7 +516,7 @@ distcheck: dist
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@ -531,7 +540,7 @@ check: check-am
 all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
 installdirs:
 	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@ -553,7 +562,7 @@ clean-generic:
 	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@ -581,12 +590,20 @@ info-am:

 install-data-am: install-includeHEADERS

+install-dvi: install-dvi-am
+
 install-exec-am: install-libLTLIBRARIES

+install-html: install-html-am
+
 install-info: install-info-am

 install-man:

+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:

 maintainer-clean: maintainer-clean-am
@ -608,8 +625,9 @@ ps: ps-am

 ps-am:

-uninstall-am: uninstall-includeHEADERS uninstall-info-am \
-	uninstall-libLTLIBRARIES
+uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip

 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-generic clean-libLTLIBRARIES clean-libtool \
@ -618,14 +636,15 @@ uninstall-am: uninstall-includeHEADERS uninstall-info-am \
 	distclean-compile distclean-generic distclean-hdr \
 	distclean-libtool distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-includeHEADERS install-info \
-	install-info-am install-libLTLIBRARIES install-man \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-includeHEADERS uninstall-info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-libLTLIBRARIES install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-includeHEADERS \
 	uninstall-libLTLIBRARIES


@ -634,22 +653,6 @@ ltdl.lo: ltdl.h config.h
 $(libltdl_la_OBJECTS) $(libltdlc_la_OBJECTS): libtool
 libtool: $(LIBTOOL_DEPS)
 	$(SHELL) ./config.status --recheck
-
-local-install-files: $(DISTFILES)
-	-rm -rf $(DESTDIR)$(datadir)/libtool/libltdl
-	$(mkinstalldirs) $(DESTDIR)$(datadir)/libtool/libltdl
-	@for file in $(DISTFILES); do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$(srcdir)/||"`;; \
-	  esac; \
-	  d=$(srcdir); \
-	  if test -d $$d/$$file; then \
-	    cp -r $$d/$$file $(DESTDIR)$(datadir)/libtool/libltdl/$$file; \
-	  else \
-	    test -f $(DESTDIR)$(datadir)/libtool/libltdl/$$file \
-	    || cp $$d/$$file $(DESTDIR)$(datadir)/libtool/libltdl/$$file || :; \
-	  fi; \
-	done
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- a/libltdl/aclocal.m4
+++ b/libltdl/aclocal.m4
@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@ -11,55 +11,52 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.

-#                                                        -*- Autoconf -*-
-# Copyright (C) 2002, 2003  Free Software Foundation, Inc.
-# Generated from amversion.in; do not edit by hand.
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf.  If you want to use that,
+you should regenerate the build system entirely.], [63])])

-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.10], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])

 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.8.5])])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])

-# AM_AUX_DIR_EXPAND
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-

-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
 # $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
@ -106,26 +103,16 @@ AC_PREREQ([2.50])dnl
 am_aux_dir=`cd $ac_aux_dir && pwd`
 ])

-# AM_CONDITIONAL                                              -*- Autoconf -*-
+# AM_CONDITIONAL                                            -*- Autoconf -*-

-# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 6
+# serial 8

 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@ -134,8 +121,10 @@ AC_DEFUN([AM_CONDITIONAL],
 [AC_PREREQ(2.52)dnl
 ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
 if $2; then
  $1_TRUE=
  $1_FALSE='#'
@ -145,30 +134,18 @@ else
 fi
 AC_CONFIG_COMMANDS_PRE(
 [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
 fi])])

-# serial 7						-*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
 # Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# serial 9

 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@ -177,7 +154,6 @@ fi])])
 # CC etc. in the Makefile, will ask for an AC_PROG_CC use...


-
 # _AM_DEPENDENCIES(NAME)
 # ----------------------
 # See how the compiler implements dependency checking.
@ -197,6 +173,7 @@ AC_REQUIRE([AM_DEP_TRACK])dnl
 ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])

@ -262,6 +239,7 @@ AC_CACHE_CHECK([dependency style of $depcc],
       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@ -314,29 +292,20 @@ if test "x$enable_dependency_tracking" != xno; then
  AMDEPBACKSLASH='\'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 ])

-# Generate code to set up dependency tracking.   -*- Autoconf -*-
+# Generate code to set up dependency tracking.              -*- Autoconf -*-

-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-#serial 2
+#serial 3

 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
@ -349,33 +318,28 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
    dirpart=`AS_DIRNAME("$mf")`
  else
    continue
  fi
-  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n 's/^U = //p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
@ -401,55 +365,32 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
 ])

-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 7
+# serial 8

 # AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
 AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])

-# Do all the work for Automake.                            -*- Autoconf -*-
+# Do all the work for Automake.                             -*- Autoconf -*-

-# This macro actually does too much some checks are only needed if
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.

-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 11
-
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
 # AM_INIT_AUTOMAKE([OPTIONS])
 # -----------------------------------------------
@ -462,16 +403,20 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
 fi

 # test whether we have cygpath
@ -491,6 +436,9 @@ m4_ifval([$2],
 AC_SUBST([PACKAGE], [$1])dnl
 AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
 AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
 AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl

@ -506,7 +454,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf)
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
 AM_PROG_INSTALL_SH
 AM_PROG_INSTALL_STRIP
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
@ -515,7 +462,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
                  [_AM_DEPENDENCIES(CC)],
@ -525,6 +474,10 @@ AC_PROVIDE_IFELSE([AC_PROG_CXX],
                  [_AM_DEPENDENCIES(CXX)],
                  [define([AC_PROG_CXX],
                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+                  [_AM_DEPENDENCIES(OBJC)],
+                  [define([AC_PROG_OBJC],
+                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
 ])

@ -549,51 +502,27 @@ for _am_header in $config_headers :; do
 done
 echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])

+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
 AC_SUBST(install_sh)])

-#                                                          -*- Autoconf -*-
-# Copyright (C) 2003  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 1
+# serial 2

 # Check whether the underlying file-system supports filenames
 # with a leading dot.  For instance MS-DOS doesn't.
@ -608,67 +537,16 @@ fi
 rmdir .tst 2>/dev/null
 AC_SUBST([am__leading_dot])])

-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-

-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

 # serial 3

-AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
-  dnl maintainer-mode is disabled by default
-  AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer],
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=no)
-  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
-  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
-  MAINT=$MAINTAINER_MODE_TRUE
-  AC_SUBST(MAINT)dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes.	-*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
-
 # AM_MAKE_INCLUDE()
 # -----------------
 # Check to see how make treats includes.
@ -711,27 +589,16 @@ AC_MSG_RESULT([$_am_result])
 rm -f confinc confmf
 ])

-#  -*- Autoconf -*-
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-

+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
+# serial 5

 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@ -747,6 +614,7 @@ AC_SUBST($1)])
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
 test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
@ -757,92 +625,41 @@ else
 fi
 ])

+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_MKDIR_P
 # ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
 AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # Keeping the `.' argument allows $(mkdir_p) to be used without
-  # argument.  Indeed, we sometimes output rules like
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.
-  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
-  # expensive solution, as it forces Make to start a sub-shell.)
-  mkdir_p='mkdir -p -- .'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])

-# Helper functions for option handling.                    -*- Autoconf -*-
+# Helper functions for option handling.                     -*- Autoconf -*-

-# Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 2
+# serial 3

 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@ -867,28 +684,16 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])

+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
 #
-# Check to make sure that the build environment is sane.
-#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.

-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 3
+# serial 4

 # AM_SANITY_CHECK
 # ---------------
@ -931,25 +736,14 @@ Check your system clock])
 fi
 AC_MSG_RESULT(yes)])

+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
 # AM_PROG_INSTALL_STRIP
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# ---------------------
 # One issue with vendor `install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
@ -967,8 +761,115 @@ dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
 if test "$cross_compiling" != no; then
  AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])

-m4_include([../libtool.m4])
-m4_include([../ltdl.m4])
+# Copyright (C) 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([acinclude.m4])
--- a/libltdl/config-h.in
+++ b/libltdl/config-h.in
@ -1,4 +1,4 @@
-/* config-h.in.  Generated from configure.ac by autoheader. */
+/* config-h.in.  Generated from configure.ac by autoheader.  */

 /* Define to 1 if you have the `argz_append' function. */
 #undef HAVE_ARGZ_APPEND
--- a/libltdl/config.guess
+++ b/libltdl/config.guess
--- a/libltdl/config.sub
+++ b/libltdl/config.sub
@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   Inc.

-timestamp='2004-11-30'
+timestamp='2007-06-28'

 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@ -21,14 +22,15 @@ timestamp='2004-11-30'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.

+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@ -70,7 +72,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)

-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.

 This is free software; see the source for copying conditions.  There is NO
@ -83,11 +85,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
  case $1 in
    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
    --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
    --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
    -- )     # Stop option processing
       shift; break ;;
    - )	# Use stdin as input.
@ -99,7 +101,7 @@ while test $# -gt 0 ; do
    *local*)
       # First pass through any local machine types.
       echo $1
-       exit 0;;
+       exit ;;

    * )
       break ;;
@ -118,8 +120,9 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
    os=-$maybe_os
    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
    ;;
@ -170,6 +173,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@ -186,6 +193,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@ -230,14 +241,16 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | mcore \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@ -246,6 +259,7 @@ case $basic_machine in
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
@ -254,20 +268,24 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
@ -278,6 +296,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;

 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@ -297,20 +318,20 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
-	| bs2000-* \
+	| avr-* | avr32-* \
+	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@ -319,6 +340,7 @@ case $basic_machine in
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
@ -327,23 +349,26 @@ case $basic_machine in
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
+	| mt-* \
 	| msp430-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
@ -450,8 +475,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@ -658,6 +683,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@ -683,6 +712,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@ -758,9 +790,8 @@ case $basic_machine in
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
 		;;
 	os400)
 		basic_machine=powerpc-ibm
@ -791,6 +822,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@ -847,6 +884,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@ -873,6 +914,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@ -884,6 +929,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@ -1086,13 +1134,10 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@ -1165,20 +1210,23 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@ -1196,7 +1244,7 @@ case $os in
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
@ -1330,6 +1378,12 @@ else
 # system, and we'll never get to this point.

 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@ -1339,9 +1393,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-    c4x-* | tic4x-*)
-        os=-coff
-        ;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@ -1367,6 +1421,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;
@ -1385,6 +1442,9 @@ case $basic_machine in
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
@ -1556,7 +1616,7 @@ case $basic_machine in
 esac

 echo $basic_machine$os
-exit 0
+exit

 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
--- a/libltdl/configure
+++ b/libltdl/configure
--- a/libltdl/configure.ac
+++ b/libltdl/configure.ac
@ -13,11 +13,11 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-# 02111-1307  USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301  USA


-## FIXME: Is this really new enough? ##
+dnl FIXME: Is this really new enough?
 AC_PREREQ(2.50)


@ -52,7 +52,6 @@ fi
 ## ------------------------ ##
 AM_INIT_AUTOMAKE(AC_PACKAGE_TARNAME, AC_PACKAGE_VERSION, -)
 AM_CONFIG_HEADER([config.h:config-h.in])
-AM_MAINTAINER_MODE


 ## ------------------ ##
--- a/libltdl/install-sh
+++ b/libltdl/install-sh
@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile

-scriptversion=2004-04-01.17
+scriptversion=2006-12-25.00

 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@ -39,120 +39,157 @@ scriptversion=2004-04-01.17
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"

 # set DOITPROG to echo to test this script

 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi

-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.

-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755

-transformbasename=
-transform_arg=
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
+dst_arg=

-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 -d DIRECTORIES...
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...

-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.

 Options:
-b=TRANSFORMBASENAME
-c         copy source (using $cpprog) instead of moving (using $mvprog).
-d         create directories instead of installing files.
-g GROUP   $chgrp installed files to GROUP.
-m MODE    $chmod installed files to MODE.
-o USER    $chown installed files to USER.
-s         strip installed files (using $stripprog).
-t=TRANSFORM
--help     display this help and exit.
--version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.

 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "

-while test -n "$1"; do
+while test $# -ne 0; do
  case $1 in
-    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-        shift
-        continue;;
+    -c) ;;

-    -c) instcmd=$cpprog
-        shift
-        continue;;
+    -C) copy_on_change=true;;

-    -d) dir_arg=true
-        shift
-        continue;;
+    -d) dir_arg=true;;

    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;

-    --help) echo "$usage"; exit 0;;
+    --help) echo "$usage"; exit $?;;

-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;

    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;

-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;

-    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-        shift
-        continue;;
+    -t) dst_arg=$2
+	shift;;

-    --version) echo "$0 $scriptversion"; exit 0;;
+    -T) no_target_directory=true;;

-    *)  # When -d is used, all remaining arguments are directories to create.
-	test -n "$dir_arg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
 	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
  esac
+  shift
 done

-if test -z "$1"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
  if test -z "$dir_arg"; then
    echo "$0: no input file specified." >&2
    exit 1
@ -162,25 +199,48 @@ if test -z "$1"; then
  exit 0
 fi

+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
  # Protect names starting with `-'.
  case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
  esac

  if test -n "$dir_arg"; then
    dst=$src
-    src=
-
-    if test -d "$dst"; then
-      instcmd=:
-      chmodcmd=
-    else
-      instcmd=$mkdirprog
-    fi
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
  else
-    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
    # might cause directories to be created, which would be especially bad
    # if $src (and thus $dsttmp) contains '*'.
    if test ! -f "$src" && test ! -d "$src"; then
@ -188,135 +248,269 @@ do
      exit 1
    fi

-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
      echo "$0: no destination specified." >&2
      exit 1
    fi

-    dst=$dstarg
+    dst=$dst_arg
    # Protect names starting with `-'.
    case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
    esac

    # If destination is a directory, append the input filename; won't work
    # if double slashes aren't ignored.
    if test -d "$dst"; then
-      dst=$dst/`basename "$src"`
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
    fi
  fi

-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+  obsolete_mkdir_used=false

-  # Make sure that the destination directory exists.
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;

-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac

-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    IFS=$oIFS
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi

-    pathcomp=
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0

-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp" || lasterr=$?
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
      fi
-      pathcomp=$pathcomp/
-    done
+    fi
  fi

  if test -n "$dir_arg"; then
-    $doit $instcmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
  else
-    # If we're going to rename the final executable, determine the name now.
-    if test -z "$transformarg"; then
-      dstfile=`basename "$dst"`
-    else
-      dstfile=`basename "$dst" $transformbasename \
-               | sed $transformarg`$transformbasename
-    fi
-
-    # don't allow the sed command to completely eliminate the filename.
-    test -z "$dstfile" && dstfile=`basename "$dst"`

    # Make a couple of temp file names in the proper directory.
    dsttmp=$dstdir/_inst.$$_
    rmtmp=$dstdir/_rm.$$_

    # Trap to clean up those temp files at exit.
-    trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-    trap '(exit $?); exit' 1 2 13 15
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0

-    # Move or copy the file name to the temp name
-    $doit $instcmd "$src" "$dsttmp" &&
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&

    # and set any options; do chmod last to preserve setuid bits.
    #
    # If any of these fail, we abort the whole thing.  If we want to
    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $instcmd $src $dsttmp" command.
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&

-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&

-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit
-	       }
-	     else
-	       :
-	     fi
-	   } &&
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&

-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit; }
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
 done

-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
--- a/libltdl/ltdl.c
+++ b/libltdl/ltdl.c
@ -1,5 +1,5 @@
 /* ltdl.c -- system independent dlopen wrapper
-   Copyright (C) 1998, 1999, 2000 Free Software Foundation, Inc.
+   Copyright (C) 1998, 1999, 2000, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
   Originally by Thomas Tanner <tanner@ffii.org>
   This file is part of GNU Libtool.

@ -20,8 +20,8 @@ Lesser General Public License for more details.

 You should have received a copy of the GNU Lesser General Public
 License along with this library; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-02111-1307  USA
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301  USA

 */

@ -137,16 +137,22 @@ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA

 /* --- WINDOWS SUPPORT --- */

-
-#ifdef DLL_EXPORT
-#  define LT_GLOBAL_DATA	__declspec(dllexport)
-#else
-#  define LT_GLOBAL_DATA
+/* DLL building support on win32 hosts;  mostly to workaround their
+   ridiculous implementation of data symbol exporting. */
+#ifndef LT_GLOBAL_DATA
+#  if defined(__WINDOWS__) || defined(__CYGWIN__)
+#    ifdef DLL_EXPORT           /* defined by libtool (if required) */
+#      define LT_GLOBAL_DATA __declspec(dllexport)
+#    endif
+#  endif
+#  ifndef LT_GLOBAL_DATA        /* static linking or !__WINDOWS__ */
+#    define LT_GLOBAL_DATA
+#  endif
 #endif

 /* fopen() mode flags for reading a text file */
 #undef	LT_READTEXT_MODE
-#ifdef __WINDOWS__
+#if defined(__WINDOWS__) || defined(__CYGWIN__)
 #  define LT_READTEXT_MODE "rt"
 #else
 #  define LT_READTEXT_MODE "r"
@ -385,11 +391,13 @@ memcpy (dest, src, size)
     const lt_ptr src;
     size_t size;
 {
-  size_t i = 0;
+  const char *	s = src;
+  char *	d = dest;
+  size_t	i = 0;

  for (i = 0; i < size; ++i)
    {
-      dest[i] = src[i];
+      d[i] = s[i];
    }

  return dest;
@ -409,17 +417,21 @@ memmove (dest, src, size)
     const lt_ptr src;
     size_t size;
 {
-  size_t i;
+  const char *	s = src;
+  char *	d = dest;
+  size_t	i;

-  if (dest < src)
+  if (d < s)
    for (i = 0; i < size; ++i)
      {
-	dest[i] = src[i];
+	d[i] = s[i];
      }
-  else if (dest > src)
-    for (i = size -1; i >= 0; --i)
+  else if (d > s && size > 0)
+    for (i = size -1; ; --i)
      {
-	dest[i] = src[i];
+	d[i] = s[i];
+	if (i == 0)
+	  break;
      }

  return dest;
@ -451,7 +463,9 @@ opendir (path)
  DIR *entry;

  assert(path != (char *) NULL);
-  (void) strncpy(file_specification,path,LT_FILENAME_MAX-1);
+  /* allow space for: path + '\\' '\\' '*' '.' '*' + '\0' */
+  (void) strncpy (file_specification, path, LT_FILENAME_MAX-6);
+  file_specification[LT_FILENAME_MAX-6] = LT_EOS_CHAR;
  (void) strcat(file_specification,"\\");
  entry = LT_DLMALLOC (DIR,sizeof(DIR));
  if (entry != (DIR *) 0)
@ -492,6 +506,7 @@ static struct dirent *readdir(entry)
  entry->firsttime = FALSE;
  (void) strncpy(entry->file_info.d_name,entry->Win32FindData.cFileName,
    LT_FILENAME_MAX-1);
+  entry->file_info.d_name[LT_FILENAME_MAX - 1] = LT_EOS_CHAR;
  entry->file_info.d_namlen = strlen(entry->file_info.d_name);
  return(&entry->file_info);
 }
@ -616,7 +631,7 @@ argz_create_sep (str, delim, pargz, pargz_len)
  assert (pargz);
  assert (pargz_len);

-  /* Make a copy of STR, but replacing each occurence of
+  /* Make a copy of STR, but replacing each occurrence of
     DELIM with '\0'.  */
  argz_len = 1+ LT_STRLEN (str);
  if (argz_len)
@ -885,7 +900,7 @@ static	const char	sys_search_path[]	= LTDL_SYSSEARCHPATH;
 		(*lt_dlmutex_seterror_func) (errormsg);		\
 	else 	lt_dllast_error = (errormsg);	} LT_STMT_END
 #define LT_DLMUTEX_GETERROR(errormsg)		LT_STMT_START {	\
-	if (lt_dlmutex_seterror_func)				\
+	if (lt_dlmutex_geterror_func)				\
 		(errormsg) = (*lt_dlmutex_geterror_func) ();	\
 	else	(errormsg) = lt_dllast_error;	} LT_STMT_END

@ -909,7 +924,7 @@ lt_dlmutex_register (lock, unlock, seterror, geterror)
     lt_dlmutex_seterror *seterror;
     lt_dlmutex_geterror *geterror;
 {
-  lt_dlmutex_unlock *old_unlock = unlock;
+  lt_dlmutex_unlock *old_unlock = lt_dlmutex_unlock_func;
  int		     errors	= 0;

  /* Lock using the old lock() callback, if any.  */
@ -920,6 +935,7 @@ lt_dlmutex_register (lock, unlock, seterror, geterror)
    {
      lt_dlmutex_lock_func     = lock;
      lt_dlmutex_unlock_func   = unlock;
+      lt_dlmutex_seterror_func = seterror;
      lt_dlmutex_geterror_func = geterror;
    }
  else
@ -1328,15 +1344,27 @@ sys_wll_open (loader_data, filename)
  if (!searchname)
    return 0;

-#if __CYGWIN__
  {
-    char wpath[MAX_PATH];
-    cygwin_conv_to_full_win32_path(searchname, wpath);
-    module = LoadLibrary(wpath);
-  }
+    /* Silence dialog from LoadLibrary on some failures.
+       No way to get the error mode, but to set it,
+       so set it twice to preserve any previous flags. */
+    UINT errormode = SetErrorMode(SEM_FAILCRITICALERRORS);
+    SetErrorMode(errormode | SEM_FAILCRITICALERRORS);
+
+#if defined(__CYGWIN__)
+    {
+      char wpath[MAX_PATH];
+      cygwin_conv_to_full_win32_path (searchname, wpath);
+      module = LoadLibrary (wpath);
+    }
 #else
-  module = LoadLibrary (searchname);
+    module = LoadLibrary (searchname);
 #endif
+
+    /* Restore the error mode. */
+    SetErrorMode(errormode);
+  }
+
  LT_DLFREE (searchname);

  /* libltdl expects this function to fail if it is unable
@ -2111,6 +2139,8 @@ static struct lt_user_dlloader presym = {
 /* The type of a function used at each iteration of  foreach_dirinpath().  */
 typedef int	foreach_callback_func LT_PARAMS((char *filename, lt_ptr data1,
 						 lt_ptr data2));
+/* foreachfile_callback itself calls a function of this type: */
+typedef int	file_worker_func      LT_PARAMS((const char *filename, void *data));

 static	int	foreach_dirinpath     LT_PARAMS((const char *search_path,
 						 const char *base_name,
@ -2309,6 +2339,18 @@ lt_dlexit ()
 		    {
 		      ++errors;
 		    }
+		  /* Make sure that the handle pointed to by 'cur' still exists.
+		     lt_dlclose recursively closes dependent libraries which removes
+		     them from the linked list.  One of these might be the one
+		     pointed to by 'cur'.  */
+		  if (cur)
+		    {
+		      for (tmp = handles; tmp; tmp = tmp->next)
+			if (tmp == cur)
+			  break;
+		      if (! tmp)
+			cur = handles;
+		    }
 		}
 	    }
 	  /* done if only resident modules are left */
@ -2521,8 +2563,8 @@ find_module (handle, dir, libdir, dlname, old_name, installed)

      /* maybe it was moved to another directory */
      {
-	  if (tryall_dlopen_module (handle,
-				    (const char *) 0, dir, dlname) == 0)
+	  if (dir && (tryall_dlopen_module (handle,
+				    (const char *) 0, dir, dlname) == 0))
 	    return 0;
      }
    }
@ -2849,12 +2891,6 @@ load_deplibs (handle, deplibs)
 	}
    }

-  /* restore the old search path */
-  LT_DLFREE (user_search_path);
-  user_search_path = save_search_path;
-
-  LT_DLMUTEX_UNLOCK ();
-
  if (!depcount)
    {
      errors = 0;
@ -2918,7 +2954,7 @@ load_deplibs (handle, deplibs)

      handle->deplibs = (lt_dlhandle*) LT_EMALLOC (lt_dlhandle *, depcount);
      if (!handle->deplibs)
-	goto cleanup;
+	goto cleanup_names;

      for (i = 0; i < depcount; ++i)
 	{
@ -2941,6 +2977,13 @@ load_deplibs (handle, deplibs)

 cleanup:
  LT_DLFREE (names);
+  /* restore the old search path */
+  if (user_search_path) {
+    LT_DLFREE (user_search_path);
+    user_search_path = save_search_path;
+  }
+  LT_DLMUTEX_UNLOCK ();
+
 #endif

  return errors;
@ -2962,6 +3005,7 @@ unload_deplibs (handle)
 	      errors += lt_dlclose (handle->deplibs[i]);
 	    }
 	}
+      LT_DLFREE (handle->deplibs);
    }

  return errors;
@ -2980,6 +3024,9 @@ trim (dest, str)

  LT_DLFREE (*dest);

+  if (!end)
+    return 1;
+
  if (len > 3 && str[0] == '\'')
    {
      tmp = LT_EMALLOC (char, end - str);
@ -2987,7 +3034,7 @@ trim (dest, str)
 	return 1;

      strncpy(tmp, &str[1], (end - str) - 1);
-      tmp[len-3] = LT_EOS_CHAR;
+      tmp[(end - str) - 1] = LT_EOS_CHAR;
      *dest = tmp;
    }
  else
@ -3161,7 +3208,7 @@ try_dlopen (phandle, filename)
 	    }
 #endif
 #ifdef LTDL_SYSSEARCHPATH
-	  if (!file && sys_search_path)
+	  if (!file && *sys_search_path)
 	    {
 	      file = find_file (sys_search_path, base_name, &dir);
 	    }
@ -3193,16 +3240,19 @@ try_dlopen (phandle, filename)
      /* read the .la file */
      while (!feof (file))
 	{
+	  line[line_len-2] = '\0';
 	  if (!fgets (line, (int) line_len, file))
 	    {
 	      break;
 	    }

 	  /* Handle the case where we occasionally need to read a line
-	     that is longer than the initial buffer size.  */
-	  while ((line[LT_STRLEN(line) -1] != '\n') && (!feof (file)))
+	     that is longer than the initial buffer size.
+	     Behave even if the file contains NUL bytes due to corruption. */
+	  while (line[line_len-2] != '\0' && line[line_len-2] != '\n' && !feof (file))
 	    {
 	      line = LT_DLREALLOC (char, line, line_len *2);
+	      line[line_len*2 - 2] = '\0';
 	      if (!fgets (&line[line_len -1], (int) line_len +1, file))
 		{
 		  break;
@ -3517,7 +3567,14 @@ lt_argz_insert (pargz, pargz_len, before, entry)
 {
  error_t error;

-  if ((error = argz_insert (pargz, pargz_len, before, entry)))
+  /* Prior to Sep 8, 2005, newlib had a bug where argz_insert(pargz,
+     pargz_len, NULL, entry) failed with EINVAL.  */
+  if (before)
+    error = argz_insert (pargz, pargz_len, before, entry);
+  else
+    error = argz_append (pargz, pargz_len, entry, 1 + LT_STRLEN (entry));
+
+  if (error)
    {
      switch (error)
 	{
@ -3668,8 +3725,7 @@ foreachfile_callback (dirname, data1, data2)
     lt_ptr data1;
     lt_ptr data2;
 {
-  int (*func) LT_PARAMS((const char *filename, lt_ptr data))
-	= (int (*) LT_PARAMS((const char *filename, lt_ptr data))) data1;
+  file_worker_func *func = *(file_worker_func **) data1;

  int	  is_done  = 0;
  char   *argz     = 0;
@ -3707,37 +3763,38 @@ lt_dlforeachfile (search_path, func, data)
     lt_ptr data;
 {
  int is_done = 0;
+  file_worker_func **fpptr = &func;

  if (search_path)
    {
      /* If a specific path was passed, search only the directories
 	 listed in it.  */
      is_done = foreach_dirinpath (search_path, 0,
-				   foreachfile_callback, func, data);
+				   foreachfile_callback, fpptr, data);
    }
  else
    {
      /* Otherwise search the default paths.  */
      is_done = foreach_dirinpath (user_search_path, 0,
-				   foreachfile_callback, func, data);
+				   foreachfile_callback, fpptr, data);
      if (!is_done)
 	{
 	  is_done = foreach_dirinpath (getenv("LTDL_LIBRARY_PATH"), 0,
-				       foreachfile_callback, func, data);
+				       foreachfile_callback, fpptr, data);
 	}

 #ifdef LTDL_SHLIBPATH_VAR
      if (!is_done)
 	{
 	  is_done = foreach_dirinpath (getenv(LTDL_SHLIBPATH_VAR), 0,
-				       foreachfile_callback, func, data);
+				       foreachfile_callback, fpptr, data);
 	}
 #endif
 #ifdef LTDL_SYSSEARCHPATH
      if (!is_done)
 	{
 	  is_done = foreach_dirinpath (getenv(LTDL_SYSSEARCHPATH), 0,
-				       foreachfile_callback, func, data);
+				       foreachfile_callback, fpptr, data);
 	}
 #endif
    }
@ -4241,17 +4298,18 @@ lt_dlcaller_get_data  (key, handle)
  LT_DLMUTEX_LOCK ();

  /* Locate the index of the element with a matching KEY.  */
-  {
-    int i;
-    for (i = 0; handle->caller_data[i].key; ++i)
-      {
-	if (handle->caller_data[i].key == key)
-	  {
-	    result = handle->caller_data[i].data;
-	    break;
-	  }
-      }
-  }
+  if (handle->caller_data)
+    {
+      int i;
+      for (i = 0; handle->caller_data[i].key; ++i)
+        {
+          if (handle->caller_data[i].key == key)
+            {
+              result = handle->caller_data[i].data;
+              break;
+            }
+        }
+    }

  LT_DLMUTEX_UNLOCK ();

--- a/libltdl/ltdl.h
+++ b/libltdl/ltdl.h
@ -1,5 +1,5 @@
 /* ltdl.h -- generic dlopen functions
-   Copyright (C) 1998-2000 Free Software Foundation, Inc.
+   Copyright (C) 1998-2001, 2003, 2004, 2007 Free Software Foundation, Inc.
   Originally by Thomas Tanner <tanner@ffii.org>
   This file is part of GNU Libtool.

@ -20,8 +20,8 @@ Lesser General Public License for more details.

 You should have received a copy of the GNU Lesser General Public
 License along with this library; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-02111-1307  USA
+Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301  USA
 */

 /* Only include this header file once. */
@ -79,7 +79,7 @@ LT_BEGIN_C_DECLS

 /* LT_CONC creates a new concatenated symbol for the compiler
   in a portable way.  */
-#if defined(__STDC__) || defined(__cplusplus) || defined(_MSC_VER)
+#if defined(__STDC__) || defined(__cplusplus) || defined(_MSC_VER) || defined(_AIX)
 #  define LT_CONC(s,t)	s##t
 #else
 #  define LT_CONC(s,t)	s/**/t
@ -127,11 +127,12 @@ LT_BEGIN_C_DECLS
 /* DLL building support on win32 hosts;  mostly to workaround their
   ridiculous implementation of data symbol exporting. */
 #ifndef LT_SCOPE
-#  ifdef __WINDOWS__
+#  if defined(__WINDOWS__) || defined(__CYGWIN__)
 #    ifdef DLL_EXPORT		/* defined by libtool (if required) */
 #      define LT_SCOPE	__declspec(dllexport)
 #    endif
 #    ifdef LIBLTDL_DLL_IMPORT	/* define if linking with this dll */
+       /* note: cygwin/mingw compilers can rely instead on auto-import */
 #      define LT_SCOPE	extern __declspec(dllimport)
 #    endif
 #  endif
--- a/libltdl/ltmain.sh
+++ b/libltdl/ltmain.sh
--- a/libltdl/missing
+++ b/libltdl/missing
@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.

-scriptversion=2003-09-02.23
+scriptversion=2006-05-10.23

-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.

@ -19,8 +19,8 @@ scriptversion=2003-09-02.23

 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.

 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@ -33,6 +33,8 @@ if test $# -eq 0; then
 fi

 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'

 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@ -44,7 +46,7 @@ fi

 msg="missing on your system"

-case "$1" in
+case $1 in
 --run)
  # Try to run requested program, and just exit if it succeeds.
  run=
@ -60,11 +62,6 @@ case "$1" in
    msg="probably too old"
  fi
  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in

  -h|--h|--he|--hel|--help)
    echo "\
@ -82,6 +79,7 @@ Supported PROGRAM values:
  aclocal      touch file \`aclocal.m4'
  autoconf     touch file \`configure'
  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
  automake     touch all \`Makefile.in' files
  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
  flex         create \`lex.yy.c', if possible, from existing .c
@ -92,10 +90,12 @@ Supported PROGRAM values:
  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]

 Send bug reports to <bug-automake@gnu.org>."
+    exit $?
    ;;

  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
    echo "missing $scriptversion (GNU Automake)"
+    exit $?
    ;;

  -*)
@ -104,12 +104,42 @@ Send bug reports to <bug-automake@gnu.org>."
    exit 1
    ;;

-  aclocal*)
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
       # We have it, but it failed.
       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
    fi
+    ;;
+esac

+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+  aclocal*)
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
@ -119,11 +149,6 @@ WARNING: \`$1' is $msg.  You should only need it if
    ;;

  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`${configure_ac}'.  You might want to install the
@ -133,11 +158,6 @@ WARNING: \`$1' is $msg.  You should only need it if
    ;;

  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@ -147,7 +167,7 @@ WARNING: \`$1' is $msg.  You should only need it if
    test -z "$files" && files="config.h"
    touch_files=
    for f in $files; do
-      case "$f" in
+      case $f in
      *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
      *) touch_files="$touch_files $f.in";;
@ -157,11 +177,6 @@ WARNING: \`$1' is $msg.  You should only need it if
    ;;

  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
@ -173,11 +188,6 @@ WARNING: \`$1' is $msg.  You should only need it if
    ;;

  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
    echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
         You might have modified some files without having the
@ -185,8 +195,8 @@ WARNING: \`$1' is needed, but is $msg.
         You can get \`$1' as part of \`Autoconf' from any GNU
         archive site."

-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -f "$file"; then
 	touch $file
    else
@ -207,25 +217,25 @@ WARNING: \`$1' $msg.  You should only need it if
         in order for those modifications to take effect.  You can get
         \`Bison' from any GNU archive site."
    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
        eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
    fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
    fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
    fi
    ;;
@ -237,39 +247,32 @@ WARNING: \`$1' is $msg.  You should only need it if
         in order for those modifications to take effect.  You can get
         \`Flex' from any GNU archive site."
    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
        eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
    fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
    fi
    ;;

  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."

-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
    else
 	test -z "$file" || exec >$file
@ -279,11 +282,6 @@ WARNING: \`$1' is $msg.  You should only need it if
    ;;

  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
    echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
         you modified a \`.texi' or \`.texinfo' file, or any other file
@ -291,20 +289,29 @@ WARNING: \`$1' is $msg.  You should only need it if
         call might also be the consequence of using a buggy \`make' (AIX,
         DU, IRIX).  You might want to install the \`Texinfo' package or
         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
    touch $file
    ;;

  tar)
    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi

    # We have already tried tar in the generic part.
    # Look for gnutar/gtar before invocation to avoid ugly error
@ -317,13 +324,13 @@ WARNING: \`$1' is $msg.  You should only need it if
    fi
    firstarg="$1"
    if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
--- a/ltmain.sh
+++ b/ltmain.sh