mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

SmartSDR Slice improvements

pull/1557/head
Mike Black W9MDB 2024-05-24 10:25:02 -05:00
rodzic 97a693a87f
commit d27a8e9df5
6 zmienionych plików z 166 dodań i 26 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
rigs/flexradio/dttsp.c
Wyświetl plik

@ -488,7 +488,7 @@ int dttsp_init(RIG *rig)
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
STATE(rig)->priv = (struct dttsp_priv_data *)calloc(1,
sizeof(struct dttsp_priv_data));
sizeof(struct dttsp_priv_data));
if (!STATE(rig)->priv)
{

2
rigs/flexradio/sdr1k.c
Wyświetl plik

@ -197,7 +197,7 @@ int sdr1k_init(RIG *rig)
struct rig_state *rs = STATE(rig);
rs->priv = (struct sdr1k_priv_data *)calloc(1, sizeof(
struct sdr1k_priv_data));
struct sdr1k_priv_data));
if (!rs->priv)
{

178
rigs/flexradio/smartsdr.c
Wyświetl plik

@ -39,7 +39,8 @@ static int smartsdr_close(RIG *rig);
static int smartsdr_cleanup(RIG *rig);
static int smartsdr_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
static int smartsdr_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
static int smartsdr_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int smartsdr_set_mode(RIG *rig, vfo_t vfo, rmode_t mode,
pbwidth_t width);
//static int smartsdr_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
struct smartsdr_priv_data
@ -47,6 +48,12 @@ struct smartsdr_priv_data
int slicenum; // slice 0-7 maps to A-H
int seqnum;
int ptt;
double freqA;
double freqB;
rmode_t modeA;
rmode_t modeB;
int widthA;
int widthB;
};
@ -56,7 +63,7 @@ struct smartsdr_priv_data
#define SMARTSDR_LEVEL RIG_LEVEL_PREAMP
#define SMARTSDR_PARM RIG_PARM_NONE
#define SMARTSDR_MODES (RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_PKTUSB|RIG_MODE_PKTLSB|RIG_MODE_CW|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_FMN)
#define SMARTSDR_MODES (RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_PKTUSB|RIG_MODE_PKTLSB|RIG_MODE_CW|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_FMN|RIG_MODE_SAM)
#define SMARTSDR_VFO (RIG_VFO_A|RIG_VFO_B)
@ -173,23 +180,25 @@ int smartsdr_init(RIG *rig)
static int smartsdr_transaction(RIG *rig, char *buf, char *reply, int reply_len)
{
struct smartsdr_priv_data *priv = (struct smartsdr_priv_data *)STATE(rig)->priv;
hamlib_port_t *rp = RIGPORT(rig);
char stopset[1] = { 0x0a };
char cmd[4096];
int retval;
int nbytes;
if (priv->seqnum > 10000) priv->seqnum = 0;
sprintf(cmd,"C%d|%s%c", priv->seqnum++, buf, 0x0a);
rig_flush(rp);
retval = write_block(rp, (unsigned char *) cmd, strlen(cmd));
nbytes = read_string(rp, (unsigned char *)reply, reply_len, stopset, 1, 0, sizeof(buf)-1);
if (priv->seqnum > 10000) { priv->seqnum = 0; }
sprintf(cmd, "C%d|%s%c", priv->seqnum++, buf, 0x0a);
rig_flush(RIGPORT(rig));
retval = write_block(RIGPORT(rig), (unsigned char *) cmd, strlen(cmd));
nbytes = read_string(RIGPORT(rig), (unsigned char *)reply, reply_len, stopset,
1, 0, 1);
retval = nbytes > 0 ? RIG_OK : retval;
return retval;
}
int smartsdr_open(RIG *rig)
{
//struct smartsdr_priv_data *priv = (struct smartsdr_priv_data *)STATE(rig)->priv;
struct smartsdr_priv_data *priv = (struct smartsdr_priv_data *)STATE(rig)->priv;
hamlib_port_t *rp = RIGPORT(rig);
char buf[4096];
char cmd[64];
@ -199,19 +208,38 @@ int smartsdr_open(RIG *rig)
ENTERFUNC;
// Once we've connected and hit here we should have two messages queued from the intial connect
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, sizeof(buf)-1);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#1: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, sizeof(buf)-1);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#2: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#3: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#4: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#5: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#6: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#7: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#8: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#9: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#10: %s", __func__, buf);
read_string(rp, (unsigned char *)buf, sizeof(buf), stopset, 1, 0, 1);
rig_debug(RIG_DEBUG_VERBOSE, "%s: Flex msg#11: %s", __func__, buf);
if ((p = strstr(buf, "radio slices")))
{
sscanf(p, "radio slices=%d", &nslices);
rig_debug(RIG_DEBUG_VERBOSE, "%s: radio_slices=%d", __func__, nslices);
}
//sprintf(cmd,"sub slice %d", priv->slicenum);
sprintf(cmd,"sub slice all");
smartsdr_transaction(rig, cmd , buf, sizeof(buf));
sprintf(cmd, "sub slice %d", priv->slicenum);
//sprintf(cmd, "sub slice all");
smartsdr_transaction(rig, cmd, buf, sizeof(buf));
smartsdr_transaction(rig, "info", buf, sizeof(buf));
rig_debug(RIG_DEBUG_VERBOSE, "%s: info=%s", __func__, buf);
@ -271,6 +299,7 @@ void *smartsdr_data_handler(void *arg)
while (priv->smartsdr_data_handler_priv_data->smartsdr_data_handler_thread_run)
{
}
pthread_exit(NULL);
return NULL;
}
@ -284,7 +313,7 @@ static int smartsdr_data_handler_start(RIG *rig)
priv->smartsdr_data_handler_thread_run = 1;
priv->smartsdr_data_handler_priv_data = calloc(1,
sizeof(smartsdr_data_handler_priv_data));
sizeof(smartsdr_data_handler_priv_data));
if (priv->smartsdr_data_handler_priv_data == NULL)
{
@ -292,7 +321,7 @@ static int smartsdr_data_handler_start(RIG *rig)
}
smartsdr_data_handler_priv = (smartsdr_data_handler_priv_data *)
priv->smartsdr_data_handler_priv_data;
priv->smartsdr_data_handler_priv_data;
smartsdr_data_handler_priv->args.rig = rig;
int err = pthread_create(&smartsdr_data_handler_priv->thread_id, NULL,
smartsdr_data_handler, &smartsdr_data_handler_priv->args);
@ -305,10 +334,20 @@ static int smartsdr_data_handler_start(RIG *rig)
}
RETURNFUNC(RIG_OK);
fset = 1500 post_demod_bypass = 0 rfgain = 24 tx_ant_list = ANT1, ANT2, XVTA,
XVTB
}
#endif
#endif
/* Example response to "sub slice 0"
511+511+35
S67319A86|slice 0 in_use=1 sample_rate=24000 RF_frequency=10.137000 client_handle=0x76AF7C73 index_letter=A rit_on=0 rit_freq=0 xit_on=0 xit_freq=0 rxant=ANT2 mode=DIGU wide=0 filter_lo=0 filter_hi=3510 step=10 step_list=1,5,10,20,100,250,500,1000 agc_mode=fast agc_threshold=65 agc_off_level=10 pan=0x40000000 txant=ANT2 loopa=0 loopb=0 qsk=0 dax=1 dax_clients=1 lock=0 tx=1 active=1 audio_level=100 audio_pan=51 audio_mute=1 record=0 play=disabled record_time=0.0 anf=0 anf_level=0 nr=0 nr_level=0 nb=0 nb_lev direct=1 el=50 wnb=0 wnb_level=100 apf=0 apf_level=0 squelch=1 squelch_level=20 diversity=0 diversity_parent=0 diversity_child=0 diversity_index=1342177293 ant_list=ANT1,ANT2,RX_A,RX_B,XVTA,XVTB mode_list=LSB,USB,AM,CW,DIGL,DIGU,SAM,FM,NFM,DFM,RTTY fm_tone_mode=OFF fm_tone_value=67.0 fm_repeater_offset_freq=0.000000 tx_offset_freq=0.000000 repeater_offset_dir=SIMPLEX fm_tone_burst=0 fm_deviation=5000 dfm_pre_de_emphasis=0 post_demod_low=300 post_demod_high=3300 rtty_mark=2125 rtty_shift=170 digl_offset=2210 digu_offset=1500 post_demod_bypass=0 rfgain=24 tx_ant_list=ANT1,ANT2,XVTA,XVTB
S67319A86|waveform installed_list=
R0|0|
*/
int smartsdr_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
@ -323,12 +362,110 @@ int smartsdr_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
RETURNFUNC(RIG_OK);
}
static int smartsdr_parse_S(RIG *rig, char *s)
{
struct smartsdr_priv_data *priv = (struct smartsdr_priv_data *)STATE(rig)->priv;
freq_t freq;
char mode[16];
char *s2 = strdup(s);
char *sep = "| \n";
char *p = strtok(s2, sep);
int gotFreq = 0, gotMode = 0;
do
{
if (sscanf(p, "RF_frequency=%lf", &freq) == 1)
{
priv->freqA = freq * 1e6;
rig_debug(RIG_DEBUG_VERBOSE, "%s: got freq=%g\n", __func__, freq);
gotFreq = 1;
rig_set_cache_freq(rig, RIG_VFO_A, priv->freqA);
}
else if (sscanf(p, "filter_hi=%d\n", &priv->widthA) == 1)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s: got width=%d\n", __func__, priv->widthA);
rig_set_cache_mode(rig, RIG_VFO_A, priv->modeA, priv->widthA);
}
else if (sscanf(p, "tx=%d\n", &priv->ptt) == 1)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s: got ptt=%d\n", __func__, priv->ptt);
}
else if (sscanf(p, "mode=%s\n", mode) == 1)
{
if (strcmp(mode, "USB") == 0) { priv->modeA = RIG_MODE_USB; }
else if (strcmp(mode, "LSB") == 0) { priv->modeA = RIG_MODE_LSB; }
else if (strcmp(mode, "DIGU") == 0) { priv->modeA = RIG_MODE_PKTUSB; }
else if (strcmp(mode, "DIGL") == 0) { priv->modeA = RIG_MODE_PKTLSB; }
else if (strcmp(mode, "AM") == 0) { priv->modeA = RIG_MODE_AM; }
else if (strcmp(mode, "CW") == 0) { priv->modeA = RIG_MODE_CW; }
else if (strcmp(mode, "SAM") == 0) { priv->modeA = RIG_MODE_SAM; }
else if (strcmp(mode, "FM") == 0) { priv->modeA = RIG_MODE_FM; }
else if (strcmp(mode, "FMN") == 0) { priv->modeA = RIG_MODE_FMN; }
else if (strcmp(mode, "RTTY") == 0) { priv->modeA = RIG_MODE_RTTY; }
else
{
priv->modeA = RIG_MODE_NONE;
rig_debug(RIG_DEBUG_ERR, "%s: unknown mode=%s\n", __func__, mode);
return -RIG_EPROTO;
}
rig_set_cache_mode(rig, RIG_VFO_A, priv->modeA, priv->widthA);
gotMode = 1;
rig_debug(RIG_DEBUG_VERBOSE, "%s: got mode=%s\n", __func__,
rig_strrmode(priv->modeA));
}
}
while ((p = strtok(NULL, sep)));
free(s2);
rig_debug(RIG_DEBUG_VERBOSE, "%s gotFreq=%d, gotMode=%d\n", __func__, gotFreq,
gotMode);
return RIG_OK;
}
int smartsdr_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
int cache_ms_freq_p;
struct smartsdr_priv_data *priv = (struct smartsdr_priv_data *)STATE(rig)->priv;
char buf[4096];
char cmd[64];
ENTERFUNC;
// we expect two specific responses -- could be interlaces with other messages
int gotS = 0;
int gotR = 0;
int retval = -RIG_EINTERNAL;
int maxloop = 5;
sprintf(cmd, "sub slice %d", priv->slicenum);
smartsdr_transaction(rig, cmd, buf, sizeof(buf));
do
{
if (buf[0] == 'S')
{
if (smartsdr_parse_S(rig, buf) == RIG_OK)
{
gotS = 1;
*freq = priv->freqA;
}
}
else if (buf[0] == 'R')
{
if (strncmp(buf, "R0|", 3))
{
rig_debug(RIG_DEBUG_ERR, "%s: error returned %s\n", __func__, buf);
}
gotR = 1;
}
}
while (gotS == 0 && gotR == 0 && strlen(buf) > 0 && --maxloop > 0);
retval = RIG_OK;
if (gotS != 1) { retval = -RIG_EPROTO; rig_debug(RIG_DEBUG_ERR, "%s: no slice status?\n", __func__); }
if (gotR != 1) { retval = -RIG_EPROTO; rig_debug(RIG_DEBUG_ERR, "%s: no return code?\n", __func__); }
rig_get_cache_freq(rig, vfo, freq, &cache_ms_freq_p);
RETURNFUNC(RIG_OK);
}
@ -346,10 +483,11 @@ int smartsdr_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt)
if (ptt)
{
sprintf(cmd, "dax audio set %d tx=1", priv->slicenum+1);
sprintf(cmd, "dax audio set %d tx=1", priv->slicenum + 1);
smartsdr_transaction(rig, cmd, buf, sizeof(buf));
rig_debug(RIG_DEBUG_VERBOSE, "%s: slice set answer: %s", __func__, buf);
}
sprintf(cmd, "slice set %d tx=1", priv->slicenum);
smartsdr_transaction(rig, cmd, buf, sizeof(buf));
sprintf(cmd, "xmit %d", ptt);
@ -372,7 +510,7 @@ int smartsdr_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
struct smartsdr_priv_data *priv = (struct smartsdr_priv_data *)STATE(rig)->priv;
char buf[4096];
char cmd[64];
char *rmode=RIG_MODE_NONE;
char *rmode = RIG_MODE_NONE;
ENTERFUNC;
switch (mode)

6
rigs/flexradio/smartsdr_caps.h
Wyświetl plik

@ -1,14 +1,14 @@
.mfg_name = "Flex-radio",
.version = "20240521.0",
.version = "20240523.1",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.targetable_vfo = 0,
.ptt_type = RIG_PTT_RIG,
.port_type = RIG_PORT_NETWORK,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 500,
.timeout = 2000,
.retry = 2,
.has_get_func = SMARTSDR_FUNC,

2
simulators/Makefile.am
Wyświetl plik

@ -8,7 +8,7 @@ DISTCLEANFILES =
bin_PROGRAMS =
check_PROGRAMS = simelecraft simicgeneric simkenwood simyaesu simic9100 simic9700 simft991 simftdx1200 simftdx3000 simjupiter simpowersdr simid5100 simft736 simftdx5000 simtmd700 simrotorez simspid simft817 simts590 simft847 simic7300 simic7000 simic7100 simic7200 simatd578 simic905 simts450 simic7600 simic7610 simic705 simts950 simts990 simic7851 simftdx101 simxiegug90 simqrplabs simft818 simic275 simtrusdx simft1000 simtmd710 simts890 simxiegux108g simxiegux6100 simic910 simft450 simelecraftk4 simmicom
check_PROGRAMS = simelecraft simicgeneric simkenwood simyaesu simic9100 simic9700 simft991 simftdx1200 simftdx3000 simjupiter simpowersdr simid5100 simft736 simftdx5000 simtmd700 simrotorez simspid simft817 simts590 simft847 simic7300 simic7000 simic7100 simic7200 simatd578 simic905 simts450 simic7600 simic7610 simic705 simts950 simts990 simic7851 simftdx101 simxiegug90 simqrplabs simft818 simic275 simtrusdx simft1000 simtmd710 simts890 simxiegux108g simxiegux6100 simic910 simft450 simelecraftk4 simmicom simflex
simelecraft_SOURCES = simelecraft.c
simkenwood_SOURCES = simkenwood.c

2
src/conf.c
Wyświetl plik

@ -266,6 +266,8 @@ static int frontend_set_conf(RIG *rig, hamlib_token_t token, const char *val)
rig_debug(RIG_DEBUG_WARN, "%s: overriding port and changing to 4992\n", __func__);
}
sprintf(rs->rigport_deprecated.pathname, "%s:%s", val2, "4992");
strcpy(rs->rigport.pathname,rs->rigport_deprecated.pathname);
rig_debug(RIG_DEBUG_WARN, "%s: pathname=%s\n", __func__, rs->rigport.pathname);
free(val2);
}
else