kopia lustrzana https://github.com/Hamlib/Hamlib
Upgrade TS-711 and TS-811 to work.
The TS-711 and TS-811 use an IF10 board just like the TS-140/TS-680/TS-590 and thus share a lot of the same commands with it. Tested: * TS-711A * TS-811Epull/1/head
Adrian Chadd
rodzic
be4e882a19
commit
9f9c03a5cb
|
|
@ -27,7 +27,6 @@
|
|||
|
||||
#include <hamlib/rig.h>
|
||||
#include "kenwood.h"
|
||||
#include "ic10.h"
|
||||
|
||||
|
||||
#define TS711_ALL_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
|
||||
|
|
@ -42,23 +41,60 @@
|
|||
#define TS711_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
|
||||
#define TS711_SCAN_OP (RIG_SCAN_VFO)
|
||||
|
||||
/*
|
||||
* There are some platform differences:
|
||||
*
|
||||
* + Tone on/off isn't applicable to "kenwood" versions of the E rigs
|
||||
* + Tone frequency is only A/B rigs
|
||||
* + Offset is only TS-811A, TS-811B, TS-811E, TS-711A, TS-711E.
|
||||
*
|
||||
* So maybe this should have a separate set of backends for each
|
||||
* rig variation because of the frequency range differences, capability
|
||||
* differences, etc, etc.
|
||||
*/
|
||||
|
||||
static struct kenwood_priv_caps ts711_priv_caps = {
|
||||
.cmdtrm = EOM_KEN,
|
||||
.if_len = 28,
|
||||
};
|
||||
|
||||
/*
|
||||
* vfo defines
|
||||
*/
|
||||
#define VFO_A '0'
|
||||
#define VFO_B '1'
|
||||
#define VFO_MEM '2'
|
||||
|
||||
|
||||
/* Note: The 140/680/711/811 need this to set the VFO on the radio */
|
||||
static int
|
||||
ts711_set_vfo(RIG *rig, vfo_t vfo)
|
||||
{
|
||||
char cmdbuf[16];
|
||||
char vfo_function;
|
||||
|
||||
switch (vfo) {
|
||||
case RIG_VFO_VFO:
|
||||
case RIG_VFO_A: vfo_function = VFO_A; break;
|
||||
case RIG_VFO_B: vfo_function = VFO_B; break;
|
||||
case RIG_VFO_MEM: vfo_function = VFO_MEM; break;
|
||||
case RIG_VFO_CURR: return RIG_OK;
|
||||
default:
|
||||
rig_debug(RIG_DEBUG_ERR,"%s: unsupported VFO %d\n",
|
||||
__func__, vfo);
|
||||
return -RIG_EINVAL;
|
||||
}
|
||||
sprintf(cmdbuf, "FN%c", vfo_function);
|
||||
return kenwood_transaction(rig, cmdbuf, NULL, 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* ts711 rig capabilities.
|
||||
*
|
||||
* specs: http://www.qsl.net/sm7vhs/radio/kenwood/ts711/specs.htm
|
||||
*
|
||||
* TODO: protocol to be check with manual!
|
||||
*/
|
||||
const struct rig_caps ts711_caps = {
|
||||
.rig_model = RIG_MODEL_TS711,
|
||||
.model_name = "TS-711",
|
||||
.mfg_name = "Kenwood",
|
||||
.version = BACKEND_VER "." IC10_VER,
|
||||
.version = BACKEND_VER ".1",
|
||||
.copyright = "LGPL",
|
||||
.status = RIG_STATUS_UNTESTED,
|
||||
.rig_type = RIG_TYPE_TRANSCEIVER,
|
||||
|
|
@ -98,9 +134,10 @@ const struct rig_caps ts711_caps = {
|
|||
.chan_desc_sz = 0,
|
||||
|
||||
/* FIXME: split memories, call channel, etc. */
|
||||
.chan_list = { { 1, 59, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} },
|
||||
RIG_CHAN_END,
|
||||
},
|
||||
.chan_list = {
|
||||
{ 1, 59, RIG_MTYPE_MEM },
|
||||
RIG_CHAN_END,
|
||||
},
|
||||
|
||||
.rx_range_list1 = {
|
||||
{MHz(144),MHz(146),TS711_ALL_MODES,-1,-1,TS711_VFO},
|
||||
|
|
@ -147,33 +184,20 @@ const struct rig_caps ts711_caps = {
|
|||
.rig_init = kenwood_init,
|
||||
.rig_cleanup = kenwood_cleanup,
|
||||
.set_freq = kenwood_set_freq,
|
||||
.get_freq = ic10_get_freq,
|
||||
.get_freq = kenwood_get_freq,
|
||||
.set_rit = kenwood_set_rit,
|
||||
.get_rit = kenwood_get_rit,
|
||||
.set_xit = kenwood_set_xit,
|
||||
.get_xit = kenwood_get_xit,
|
||||
.set_mode = kenwood_set_mode,
|
||||
.get_mode = ic10_get_mode,
|
||||
.set_vfo = ic10_set_vfo,
|
||||
.get_vfo = ic10_get_vfo,
|
||||
.set_split_vfo = ic10_set_split_vfo,
|
||||
.get_split_vfo = ic10_get_split_vfo,
|
||||
.get_mode = kenwood_get_mode_if,
|
||||
.set_vfo = ts711_set_vfo,
|
||||
.get_vfo = kenwood_get_vfo_if,
|
||||
.set_ptt = kenwood_set_ptt,
|
||||
.get_ptt = ic10_get_ptt,
|
||||
.set_func = kenwood_set_func,
|
||||
.set_func = kenwood_set_func,
|
||||
.get_func = kenwood_get_func,
|
||||
.vfo_op = kenwood_vfo_op,
|
||||
.set_mem = kenwood_set_mem,
|
||||
.get_mem = ic10_get_mem,
|
||||
.set_trn = kenwood_set_trn,
|
||||
.scan = kenwood_scan,
|
||||
.set_ctcss_tone = kenwood_set_ctcss_tone,
|
||||
.get_ctcss_tone = kenwood_get_ctcss_tone,
|
||||
.set_level = kenwood_set_level,
|
||||
.get_level = kenwood_get_level,
|
||||
.set_channel = ic10_set_channel,
|
||||
.get_channel = ic10_get_channel,
|
||||
.decode_event = ic10_decode_event,
|
||||
.get_mem = kenwood_get_mem_if,
|
||||
.reset = kenwood_reset,
|
||||
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -32,33 +32,56 @@
|
|||
|
||||
#define TS811_ALL_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
|
||||
|
||||
/* func and levels to be checked */
|
||||
#define TS811_FUNC_ALL (RIG_FUNC_TSQL|RIG_FUNC_LOCK|RIG_FUNC_MUTE)
|
||||
|
||||
#define TS811_LEVEL_ALL (RIG_LEVEL_STRENGTH)
|
||||
|
||||
#define TS811_VFO (RIG_VFO_A|RIG_VFO_B)
|
||||
#define TS811_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
|
||||
|
||||
#define TS811_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
|
||||
#define TS811_SCAN_OP (RIG_SCAN_VFO)
|
||||
|
||||
static struct kenwood_priv_caps ts811_priv_caps = {
|
||||
.cmdtrm = EOM_KEN,
|
||||
.if_len = 28,
|
||||
};
|
||||
|
||||
/*
|
||||
* vfo defines
|
||||
*/
|
||||
#define VFO_A '0'
|
||||
#define VFO_B '1'
|
||||
#define VFO_MEM '2'
|
||||
|
||||
|
||||
/* Note: The 140/680/711/811 need this to set the VFO on the radio */
|
||||
static int
|
||||
ts811_set_vfo(RIG *rig, vfo_t vfo)
|
||||
{
|
||||
char cmdbuf[16];
|
||||
char vfo_function;
|
||||
|
||||
switch (vfo) {
|
||||
case RIG_VFO_VFO:
|
||||
case RIG_VFO_A: vfo_function = VFO_A; break;
|
||||
case RIG_VFO_B: vfo_function = VFO_B; break;
|
||||
case RIG_VFO_MEM: vfo_function = VFO_MEM; break;
|
||||
case RIG_VFO_CURR: return RIG_OK;
|
||||
default:
|
||||
rig_debug(RIG_DEBUG_ERR,"%s: unsupported VFO %d\n",
|
||||
__func__, vfo);
|
||||
return -RIG_EINVAL;
|
||||
}
|
||||
sprintf(cmdbuf, "FN%c", vfo_function);
|
||||
return kenwood_transaction(rig, cmdbuf, NULL, 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* ts811 rig capabilities.
|
||||
*
|
||||
* specs: http://www.qsl.net/sm7vhs/radio/kenwood/ts811/specs.htm
|
||||
*
|
||||
* TODO: protocol to be check with manual!
|
||||
*/
|
||||
const struct rig_caps ts811_caps = {
|
||||
.rig_model = RIG_MODEL_TS811,
|
||||
.model_name = "TS-811",
|
||||
.mfg_name = "Kenwood",
|
||||
.version = BACKEND_VER "." IC10_VER,
|
||||
.version = BACKEND_VER ".1",
|
||||
.copyright = "LGPL",
|
||||
.status = RIG_STATUS_UNTESTED,
|
||||
.rig_type = RIG_TYPE_TRANSCEIVER,
|
||||
|
|
@ -76,16 +99,14 @@ const struct rig_caps ts811_caps = {
|
|||
.timeout = 1000,
|
||||
.retry = 10,
|
||||
|
||||
.has_get_func = TS811_FUNC_ALL,
|
||||
.has_set_func = TS811_FUNC_ALL,
|
||||
.has_get_func = RIG_FUNC_LOCK,
|
||||
.has_set_func = RIG_FUNC_LOCK,
|
||||
.has_get_level = TS811_LEVEL_ALL,
|
||||
.has_set_level = RIG_LEVEL_SET(TS811_LEVEL_ALL),
|
||||
.has_get_parm = RIG_PARM_NONE,
|
||||
.has_set_parm = RIG_PARM_NONE,
|
||||
.level_gran = {}, /* FIXME: granularity */
|
||||
.parm_gran = {},
|
||||
.vfo_ops = TS811_VFO_OP,
|
||||
.scan_ops = TS811_SCAN_OP,
|
||||
.ctcss_list = kenwood38_ctcss_list,
|
||||
.preamp = { RIG_DBLST_END, },
|
||||
.attenuator = { RIG_DBLST_END, },
|
||||
|
|
@ -98,9 +119,10 @@ const struct rig_caps ts811_caps = {
|
|||
.chan_desc_sz = 0,
|
||||
|
||||
/* FIXME: split memories, call channel, etc. */
|
||||
.chan_list = { { 1, 59, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} },
|
||||
RIG_CHAN_END,
|
||||
},
|
||||
.chan_list = {
|
||||
{ 1, 59, RIG_MTYPE_MEM },
|
||||
RIG_CHAN_END,
|
||||
},
|
||||
|
||||
.rx_range_list1 = {
|
||||
{MHz(430),MHz(440),TS811_ALL_MODES,-1,-1,TS811_VFO},
|
||||
|
|
@ -147,34 +169,20 @@ const struct rig_caps ts811_caps = {
|
|||
.rig_init = kenwood_init,
|
||||
.rig_cleanup = kenwood_cleanup,
|
||||
.set_freq = kenwood_set_freq,
|
||||
.get_freq = ic10_get_freq,
|
||||
.get_freq = kenwood_get_freq,
|
||||
.set_rit = kenwood_set_rit,
|
||||
.get_rit = kenwood_get_rit,
|
||||
.set_xit = kenwood_set_xit,
|
||||
.get_xit = kenwood_get_xit,
|
||||
.set_mode = kenwood_set_mode,
|
||||
.get_mode = ic10_get_mode,
|
||||
.set_vfo = ic10_set_vfo,
|
||||
.get_vfo = ic10_get_vfo,
|
||||
.set_split_vfo = ic10_set_split_vfo,
|
||||
.get_split_vfo = ic10_get_split_vfo,
|
||||
.get_mode = kenwood_get_mode_if,
|
||||
.set_vfo = ts811_set_vfo,
|
||||
.get_vfo = kenwood_get_vfo_if,
|
||||
.set_ptt = kenwood_set_ptt,
|
||||
.get_ptt = ic10_get_ptt,
|
||||
.set_func = kenwood_set_func,
|
||||
.set_func = kenwood_set_func,
|
||||
.get_func = kenwood_get_func,
|
||||
.vfo_op = kenwood_vfo_op,
|
||||
.set_mem = kenwood_set_mem,
|
||||
.get_mem = ic10_get_mem,
|
||||
.set_trn = kenwood_set_trn,
|
||||
.scan = kenwood_scan,
|
||||
.set_ctcss_tone = kenwood_set_ctcss_tone,
|
||||
.get_ctcss_tone = kenwood_get_ctcss_tone,
|
||||
.set_level = kenwood_set_level,
|
||||
.get_level = kenwood_get_level,
|
||||
.set_channel = ic10_set_channel,
|
||||
.get_channel = ic10_get_channel,
|
||||
.decode_event = ic10_decode_event,
|
||||
|
||||
.get_mem = kenwood_get_mem_if,
|
||||
.reset = kenwood_reset,
|
||||
};
|
||||
|
||||
/*
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue