diff --git a/rigs/icom/icr9500.c b/rigs/icom/icr9500.c new file mode 100644 index 000000000..bf90ee04b --- /dev/null +++ b/rigs/icom/icr9500.c @@ -0,0 +1,232 @@ +/* + * Hamlib CI-V backend - IC-R9500 descriptions + * Copyright (c) 2000-2011 by Stephane Fillod + * + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include + +#include +#include "serial.h" +#include "misc.h" +#include "idx_builtin.h" + +#include "icom.h" +#include "icom_defs.h" +#include "frame.h" + + +#define ICR9500_MODES (RIG_MODE_AM|RIG_MODE_AMS|\ + RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|\ + RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_WFM) + +#define ICR9500_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL) + +#define ICR9500_FUNCS (RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_NR|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK) +#define ICR9500_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF) +#define ICR9500_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT) +#define ICR9500_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO) /* TBC */ + +#define ICR9500_HF_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3) + +#define ICR9500_VFOS (RIG_VFO_A|RIG_VFO_MEM) + +#define ICR9500_MEM_CAP { /* FIXME */ \ + .freq = 1, \ + .mode = 1, \ + .width = 1, \ + .levels = RIG_LEVEL_ATT, \ +} + + +/* TODO: S-Meter measurements */ +/* This is just a copy if IC9700_STR_CAL */ +/* Hope it's correct */ +#define ICR9500_STR_CAL { 7, \ + { \ + { 0, -54 }, \ + { 10, -48 }, \ + { 30, -36 }, \ + { 60, -24 }, \ + { 90, -12 }, \ + { 120, 0 }, \ + { 241, 64 } \ + } } + + +static const struct icom_priv_caps icr9500_priv_caps = +{ + 0x72, /* default address */ + 0, /* 731 mode */ + 0, /* no XCHG */ + r9500_ts_sc_list +}; + +/* + * ICR9500A rig capabilities. + */ +const struct rig_caps icr9500_caps = +{ + .rig_model = RIG_MODEL_ICR9500, + .model_name = "IC-R9500", + .mfg_name = "Icom", + .version = BACKEND_VER ".1", + .copyright = "LGPL", + .status = RIG_STATUS_UNTESTED, + .rig_type = RIG_TYPE_RECEIVER, + .ptt_type = RIG_PTT_NONE, + .dcd_type = RIG_DCD_RIG, + .port_type = RIG_PORT_SERIAL, + .serial_rate_min = 300, + .serial_rate_max = 1200, + .serial_data_bits = 8, + .serial_stop_bits = 1, + .serial_parity = RIG_PARITY_NONE, + .serial_handshake = RIG_HANDSHAKE_NONE, + .write_delay = 0, + .post_write_delay = 0, + .timeout = 1000, + .retry = 3, + + .has_get_func = ICR9500_FUNCS, + .has_set_func = ICR9500_FUNCS, + .has_get_level = ICR9500_LEVELS, + .has_set_level = RIG_LEVEL_SET(ICR9500_LEVELS), + .has_get_parm = ICR9500_PARMS, + .has_set_parm = RIG_PARM_SET(ICR9500_PARMS), + .level_gran = { + [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, + }, + .parm_gran = {}, + .ctcss_list = common_ctcss_list, + .dcs_list = common_dcs_list, + .preamp = { 10, 20, RIG_DBLST_END }, /* FIXME: TBC */ + .attenuator = { 6, 10, 12, 18, 20, 24, 30, RIG_DBLST_END }, + .max_rit = Hz(0), + .max_xit = Hz(0), + .max_ifshift = Hz(0), + .targetable_vfo = 0, + .vfo_ops = ICR9500_OPS, + .scan_ops = ICR9500_SCAN_OPS, + .transceive = RIG_TRN_RIG, + .bank_qty = 12, + .chan_desc_sz = 0, /* FIXME */ + + .chan_list = { + { 0, 999, RIG_MTYPE_MEM, ICR9500_MEM_CAP }, /* TBC */ + { 1000, 1099, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-A (Auto) */ + { 1100, 1199, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-S (skip) */ + { 1200, 1219, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-P (Scan edge), 2 by 2 */ + RIG_CHAN_END, + }, + + .rx_range_list1 = { + {kHz(5), MHz(30) - 1, ICR9500_MODES, -1, -1, ICR9500_VFOS, ICR9500_HF_ANTS}, + {MHz(30), MHz(3335), ICR9500_MODES, -1, -1, ICR9500_VFOS, RIG_ANT_4}, + RIG_FRNG_END, + }, + .tx_range_list1 = { RIG_FRNG_END, }, + + .rx_range_list2 = { + {kHz(5), MHz(30) - 1, ICR9500_MODES, -1, -1, ICR9500_VFOS, ICR9500_HF_ANTS}, + {MHz(30), MHz(3335), ICR9500_MODES, -1, -1, ICR9500_VFOS, RIG_ANT_4}, + RIG_FRNG_END, + }, + .tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */ + + .tuning_steps = { + {ICR9500_MODES, 1}, /* resolution */ + {ICR9500_MODES, 10}, + {ICR9500_MODES, 100}, + {ICR9500_MODES, kHz(1)}, + {ICR9500_MODES, kHz(2.5)}, + {ICR9500_MODES, kHz(5)}, + {ICR9500_MODES, kHz(6.25)}, + {ICR9500_MODES, kHz(9)}, + {ICR9500_MODES, kHz(10)}, + {ICR9500_MODES, 12500}, + {ICR9500_MODES, kHz(20)}, + {ICR9500_MODES, kHz(25)}, + {ICR9500_MODES, kHz(100)}, + {ICR9500_MODES, MHz(1)}, + RIG_TS_END, + }, + /* mode/filter list, remember: order matters! */ + .filters = { + {RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.4)}, + {RIG_MODE_CW, Hz(500)}, + {RIG_MODE_AM | RIG_MODE_AMS, kHz(6)}, + {RIG_MODE_FM, kHz(15)}, + {RIG_MODE_WFM, kHz(350)}, + RIG_FLT_END, + }, + .str_cal = ICR9500_STR_CAL, + + .cfgparams = icom_cfg_params, + .set_conf = icom_set_conf, + .get_conf = icom_get_conf, + + .priv = (void *)& icr9500_priv_caps, + .rig_init = icom_init, + .rig_cleanup = icom_cleanup, + .rig_open = NULL, + .rig_close = NULL, + + .set_freq = icom_set_freq, + .get_freq = icom_get_freq, + .set_mode = icom_set_mode, + .get_mode = icom_get_mode, + .set_vfo = icom_set_vfo, + .set_ant = icom_set_ant, + .get_ant = icom_get_ant, + .set_rptr_shift = icom_set_rptr_shift, + .get_rptr_shift = icom_get_rptr_shift, + .set_rptr_offs = icom_set_rptr_offs, + .get_rptr_offs = icom_get_rptr_offs, + .set_ctcss_sql = icom_set_ctcss_sql, + .get_ctcss_sql = icom_get_ctcss_sql, + .set_dcs_sql = icom_set_dcs_sql, + .get_dcs_sql = icom_get_dcs_sql, + + .set_ts = icom_set_ts, + .get_ts = icom_get_ts, + .set_func = icom_set_func, + .get_func = icom_get_func, + .set_level = icom_set_level, + .get_level = icom_get_level, + .set_parm = icom_set_parm, + .get_parm = icom_get_parm, + + .decode_event = icom_decode_event, + .set_mem = icom_set_mem, + .set_bank = icom_set_bank, + .vfo_op = icom_vfo_op, + .scan = icom_scan, + .get_dcd = icom_get_dcd, +}; + + +/* + * Function definitions below + */ + +