kopia lustrzana https://github.com/Hamlib/Hamlib
Nate Bargmann
GitHub
commit
8f641b2b6a
|
|
@ -492,12 +492,6 @@ the value terminated by the response separator. e.g. \(lqFrequency:
|
|||
.
|
||||
.PP
|
||||
4. All commands received will be acknowledged by
|
||||
.B ampctld
|
||||
with records from rules 1 and 2. Records from rule 3 are only returned when
|
||||
data values must be returned to the client.
|
||||
.
|
||||
.PP
|
||||
4. All commands received will be acknowledged by
|
||||
.B ampctld
|
||||
with records from rules 1 and 2. Records from rule 3 are only returned when
|
||||
data values must be returned to the client.
|
||||
|
|
|
|||
|
|
@ -384,9 +384,9 @@ Since most of the
|
|||
.B Hamlib
|
||||
operations have a
|
||||
.BR set " and a " get
|
||||
method, a single upper case letter will often be used for a
|
||||
method, a single upper case letter will be used for
|
||||
.B set
|
||||
method whereas the corresponding single lower case letter refers to the
|
||||
methods whereas the corresponding single lower case letter refers to the
|
||||
.B get
|
||||
method. Each operation also has a long name; in interactive mode, prepend a
|
||||
backslash, \(oq\\\(cq, to enter a long command name all lower case.
|
||||
|
|
@ -528,7 +528,8 @@ Set
|
|||
.RI \(aq VFO \(aq.
|
||||
.IP
|
||||
VFO is a token: \(oqVFOA\(cq, \(oqVFOB\(cq, \(oqVFOC\(cq, \(oqcurrVFO\(cq,
|
||||
\(oqVFO\(cq, \(oqMEM\(cq, \(oqMain\(cq, \(oqSub\(cq, \(oqTX\(cq, \(oqRX\(cq.
|
||||
\(oqVFO\(cq, \(oqMEM\(cq, \(oqMain\(cq, \(oqSub\(cq, \(oqTX\(cq, \(oqRX\(cq,
|
||||
\(oqMainA\(cq, \(oqMainB\(cq, \(oqMainC\(cq, \(oqSubA\(cq, \(oqSubB\(cq \(oqSubC\(cq.
|
||||
.IP
|
||||
In VFO mode (see
|
||||
.B \-\-vfo
|
||||
|
|
@ -726,8 +727,6 @@ Get
|
|||
A value of 0 for Antenna will return the current TX antenna
|
||||
.IP
|
||||
> 0 is 1-based antenna# (\(oq1\(cq, \(oq2\(cq, \(oq3\(cq, ...).
|
||||
|
||||
|
||||
.IP
|
||||
Option returned depends on rig. For Icom it is likely the RX only flag.
|
||||
.
|
||||
|
|
@ -735,10 +734,15 @@ Option returned depends on rig. For Icom it is likely the RX only flag.
|
|||
.BR b ", " send_morse " \(aq" \fIMorse\fP \(aq
|
||||
Send
|
||||
.RI \(aq Morse \(aq
|
||||
symbols. For Yaesu rigs use memory#1-5 or up to 50 char msg
|
||||
symbols. For Yaesu rigs use memory# (1-5 for most rigs) or up to 50 char message (which will use memory#1)
|
||||
|
||||
Example from command line:
|
||||
.EX
|
||||
Example from command line: rigctl -m 3073 -r /dev/ttyUSB0 b "CQ CQ DE ME"
|
||||
Yaesu example to send message#1: rigctl -m 1035 -r /dev/ttyUSB0 b 1
|
||||
rigctl -m 3073 -r /dev/ttyUSB0 b "CQ CQ DE ME"
|
||||
.EE
|
||||
Yaesu example to send message#1:
|
||||
.EX
|
||||
rigctl -m 1035 -r /dev/ttyUSB0 b 1
|
||||
.EE
|
||||
.
|
||||
.TP
|
||||
|
|
@ -747,7 +751,7 @@ Stop sending the current morse code.
|
|||
.
|
||||
.TP
|
||||
.BR 0xbc ", " wait_morse "
|
||||
Wait for morse to finish -- only works on full break-in
|
||||
Wait for morse to finish -- only works on full break-in.
|
||||
.
|
||||
.TP
|
||||
.BR 0x94 ", " send_voice_mem " \(aq" \fIMsgnum\fP \(aq
|
||||
|
|
@ -852,65 +856,104 @@ Set
|
|||
and
|
||||
.RI \(aq "Func Status" \(aq.
|
||||
.IP
|
||||
Func is a token: \(oqFAGC\(cq, \(oqNB\(cq, \(oqCOMP\(cq, \(oqVOX\(cq,
|
||||
\(oqTONE\(cq, \(oqTSQL\(cq, \(oqSBKIN\(cq, \(oqFBKIN\(cq, \(oqANF\(cq,
|
||||
\(oqNR\(cq, \(oqAIP\(cq, \(oqAPF\(cq, \(oqMON\(cq, \(oqMN\(cq, \(oqRF\(cq,
|
||||
\(oqARO\(cq, \(oqLOCK\(cq, \(oqMUTE\(cq, \(oqVSC\(cq, \(oqREV\(cq,
|
||||
\(oqSQL\(cq, \(oqABM\(cq, \(oqBC\(cq, \(oqMBC\(cq, \(oqRIT\(cq, \(oqAFC\(cq,
|
||||
\(oqSATMODE\(cq, \(oqSCOPE\(cq, \(oqRESUME\(cq, \(oqTBURST\(cq, \(oqTUNER\(cq,
|
||||
\(oqXIT\(cq, \(oqNB2\(cq, \(oqDSQL\(cq, \(oqAFLT\(cq, \(oqANL\(cq, \(oqBC2\(cq,
|
||||
\(oqDUAL_WATCH\(cq, \(oqDIVERSITY\(cq, \(oqCSQL\(cq, \(oqSCEN\(cq,
|
||||
\(oqTRANSCEIVE\(cq, \(oqSPECTRUM\(cq, \(oqSPECTRUM_HOLD\(cq, \(oqSEND_MORSE\(cq,
|
||||
\(oqSEND_VOICE_MEM\(cq, \(oqOVF_STATUS\(cq.
|
||||
Func is a token:
|
||||
\(oqABM\(cq,
|
||||
\(oqAFC\(cq,
|
||||
\(oqAFLT\(cq,
|
||||
\(oqAIP\(cq,
|
||||
\(oqANF\(cq,
|
||||
\(oqANL\(cq,
|
||||
\(oqAPF\(cq,
|
||||
\(oqARO\(cq,
|
||||
\(oqBC2\(cq,
|
||||
\(oqBC\(cq,
|
||||
\(oqCOMP\(cq,
|
||||
\(oqCSQL\(cq,
|
||||
\(oqDIVERSITY\(cq,
|
||||
\(oqDSQL\(cq,
|
||||
\(oqDUAL_WATCH\(cq,
|
||||
\(oqFAGC\(cq,
|
||||
\(oqFBKIN\(cq,
|
||||
\(oqLOCK\(cq,
|
||||
\(oqMBC\(cq,
|
||||
\(oqMN\(cq,
|
||||
\(oqMON\(cq,
|
||||
\(oqMUTE\(cq,
|
||||
\(oqNB2\(cq,
|
||||
\(oqNB\(cq,
|
||||
\(oqNR\(cq,
|
||||
\(oqOVF_STATUS\(cq,
|
||||
\(oqRESUME\(cq,
|
||||
\(oqREV\(cq,
|
||||
\(oqRF\(cq,
|
||||
\(oqRIT\(cq,
|
||||
\(oqSATMODE\(cq,
|
||||
\(oqSBKIN\(cq,
|
||||
\(oqSCEN\(cq,
|
||||
\(oqSCOPE\(cq,
|
||||
\(oqSEND_MORSE\(cq,
|
||||
\(oqSEND_VOICE_MEM\(cq,
|
||||
\(oqSPECTRUM\(cq,
|
||||
\(oqSPECTRUM_HOLD\(cq,
|
||||
\(oqSQL\(cq,
|
||||
\(oqSYNC\(cq,
|
||||
\(oqTBURST\(cq,
|
||||
\(oqTONE\(cq,
|
||||
\(oqTRANSCEIVE\(cq,
|
||||
\(oqTSQL\(cq,
|
||||
\(oqTUNER\(cq,
|
||||
\(oqVOX\(cq,
|
||||
\(oqVSC\(cq,
|
||||
\(oqXIT\(cq.
|
||||
|
||||
FAGC -- Fast AGC
|
||||
NB -- Noise Blanker
|
||||
COMP -- Speech Compression
|
||||
VOX -- Voice Operated Relay
|
||||
TONE -- CTCSS Tone TX
|
||||
TSQL -- CTCSS Activate/De-activate RX
|
||||
SBKIN -- Semi Break-in (CW mode)
|
||||
FBKIN -- Full Break-in (CW mode)
|
||||
ANF -- Automatic Notch Filter (DSP)
|
||||
NR -- Noise Reduction (DSP)
|
||||
AIP -- RF pre-amp (AIP on Kenwood, IPO on Yaesu, etc.)
|
||||
APF -- Audio Peak Filter
|
||||
MON -- Monitor transmitted signal
|
||||
MN -- Manual Notch
|
||||
RF -- RTTY Filter
|
||||
ARO -- Auto Repeater Offset
|
||||
LOCK -- Lock
|
||||
MUTE -- Mute
|
||||
VSC -- Voice Scan Control
|
||||
REV -- Reverse transmit and receive frequencies
|
||||
SQL -- Turn Squelch Monitor on/off
|
||||
ABM -- Auto Band Mode
|
||||
BC -- Beat Canceller
|
||||
MBC -- Manual Beat Canceller
|
||||
RIT -- Receiver Incremental Tuning
|
||||
AFC -- Auto Frequency Control ON/OFF
|
||||
SATMODE -- Satellite mode ON/OFF
|
||||
SCOPE -- Simple bandscope ON/OFF
|
||||
RESUME -- Scan auto-resume
|
||||
TBURST -- 1750 Hz tone burst
|
||||
TUNER -- Enable automatic tuner
|
||||
XIT -- Transmitter Incremental Tuning
|
||||
NB2 -- 2nd Noise Blanker
|
||||
CSQL -- DCS Squelch setting
|
||||
AFLT -- AF Filter setting
|
||||
AIP -- RF pre-amp (AIP on Kenwood, IPO on Yaesu, etc.)
|
||||
ANF -- Automatic Notch Filter (DSP)
|
||||
ANL -- Noise limiter setting
|
||||
APF -- Audio Peak Filter
|
||||
ARO -- Auto Repeater Offset
|
||||
BC -- Beat Canceller
|
||||
BC2 -- 2nd Beat Cancel
|
||||
DUAL_WATCH -- Dual Watch / Sub Receiver
|
||||
COMP -- Speech Compression
|
||||
CSQL -- DCS Squelch setting
|
||||
DIVERSITY -- Diversity receive
|
||||
DSQL -- Digital modes squelch
|
||||
DUAL_WATCH -- Dual Watch / Sub Receiver
|
||||
FAGC -- Fast AGC
|
||||
FBKIN -- Full Break-in (CW mode)
|
||||
LOCK -- Lock
|
||||
MBC -- Manual Beat Canceller
|
||||
MN -- Manual Notch
|
||||
MON -- Monitor transmitted signal
|
||||
MUTE -- Mute
|
||||
NB -- Noise Blanker
|
||||
NB2 -- 2nd Noise Blanker
|
||||
NR -- Noise Reduction (DSP)
|
||||
OVF_STATUS -- Read overflow status 0=Off, 1=On
|
||||
RESUME -- Scan auto-resume
|
||||
REV -- Reverse transmit and receive frequencies
|
||||
RF -- RTTY Filter
|
||||
RIT -- Receiver Incremental Tuning
|
||||
SATMODE -- Satellite mode ON/OFF
|
||||
SBKIN -- Semi Break-in (CW mode)
|
||||
SCEN -- scrambler/encryption
|
||||
SLICE -- Rig slice selection -- Flex
|
||||
TRANSCEIVE -- Send radio state changes automatically ON/OFF
|
||||
SPECTRUM -- Spectrum scope data output ON/OFF
|
||||
SPECTRUM_HOLD -- Pause spectrum scope updates ON/OFF
|
||||
SCOPE -- Simple bandscope ON/OFF
|
||||
SEND_MORSE -- Send specified characters using CW
|
||||
SEND_VOICE_MEM -- Transmit in SSB message stored in memory
|
||||
OVF -- Read overflow status 0=Off, 1=On
|
||||
SPECTRUM -- Spectrum scope data output ON/OFF
|
||||
SPECTRUM_HOLD -- Pause spectrum scope updates ON/OFF
|
||||
SQL -- Turn Squelch Monitor on/off
|
||||
SYNC -- Synchronize VFOs
|
||||
TBURST -- 1750 Hz tone burst
|
||||
TONE -- CTCSS Tone TX
|
||||
TRANSCEIVE -- Send radio state changes automatically ON/OFF
|
||||
TSQL -- CTCSS Activate/De-activate RX
|
||||
TUNER -- Enable automatic tuner
|
||||
VOX -- Voice Operated Relay
|
||||
VSC -- Voice Scan Control
|
||||
XIT -- Transmitter Incremental Tuning
|
||||
|
||||
.IP
|
||||
Func Status is a non null value for \(lqactivate\(rq or \(lqde-activate\(rq
|
||||
|
|
@ -943,17 +986,61 @@ Set
|
|||
and
|
||||
.RI \(aq "Level Value" \(aq.
|
||||
.IP
|
||||
Level is a token: \(oqPREAMP\(cq, \(oqATT\(cq, \(oqVOXDELAY\(cq, \(oqAF\(cq,
|
||||
\(oqRF\(cq, \(oqSQL\(cq, \(oqIF\(cq, \(oqAPF\(cq, \(oqNR\(cq, \(oqPBT_IN\(cq,
|
||||
\(oqPBT_OUT\(cq, \(oqCWPITCH\(cq, \(oqRFPOWER\(cq, \(oqMICGAIN\(cq,
|
||||
\(oqKEYSPD\(cq, \(oqNOTCHF\(cq, \(oqCOMP\(cq, \(oqAGC\(cq, \(oqBKINDL\(cq,
|
||||
\(oqBAL\(cq, \(oqMETER\(cq, \(oqVOXGAIN\(cq, \(oqANTIVOX\(cq,
|
||||
\(oqSLOPE_LOW\(cq, \(oqSLOPE_HIGH\(cq, \(oqBKIN_DLYMS\(cq, \(oqRAWSTR\(cq, \(oqSWR\(cq,
|
||||
\(oqALC\(cq, \(oqSTRENGTH\(cq, \(oqRFPOWER_METER\(cq, \(oqCOMPMETER\(cq, \(oqVD_METER\(cq, \(oqID_METER\(cq,
|
||||
\(oqNOTCHF_RAW\(cq, \(oqMONITOR_GAIN\(cq, \(oqNQ\(cq, \(oqRFPOWER_METER_WATTS\(cq, \(oqSPECTRUM_MODE\(cq,
|
||||
\(oqSPECTRUM_SPAN\(cq, \(oqSPECTRUM_EDGE_LOW\(cq, \(oqSPECTRUM_EDGE_HIGH\(cq, \(oqSPECTRUM_SPEED\(cq,
|
||||
\(oqSPECTRUM_REF\(cq, \(oqSPECTRUM_AVG\(cq, \(oqSPECTRUM_ATT\(cq, \(oqTEMP_METER\(cq, \(oqBANDSELECT\(cq,
|
||||
\(oqUSB_AF\(cq.
|
||||
Level is a token:
|
||||
\(oqAF\(cq,
|
||||
\(oqAGC\(cq,
|
||||
\(oqAGC_TIME\(cq,
|
||||
\(oqALC\(cq,
|
||||
\(oqANTIVOX\(cq,
|
||||
\(oqAPF\(cq,
|
||||
\(oqATT\(cq,
|
||||
\(oqBAL\(cq,
|
||||
\(oqBAND_SELECT\(cq,
|
||||
\(oqBKINDL\(cq,
|
||||
\(oqBKIN_DLYMS\(cq,
|
||||
\(oqCOMP\(cq,
|
||||
\(oqCOMP_METER\(cq,
|
||||
\(oqCWPITCH\(cq,
|
||||
\(oqID_METER\(cq,
|
||||
\(oqIF\(cq,
|
||||
\(oqKEYSPD\(cq,
|
||||
\(oqMETER\(cq,
|
||||
\(oqMGC\(cq,
|
||||
\(oqMGF\(cq,
|
||||
\(oqMGL\(cq,
|
||||
\(oqMICGAIN\(cq,
|
||||
\(oqMONITOR_GAIN\(cq,
|
||||
\(oqNB\(cq,
|
||||
\(oqNOTCHF\(cq,
|
||||
\(oqNOTCHF_RAW\(cq,
|
||||
\(oqNR\(cq,
|
||||
\(oqPBT_IN\(cq,
|
||||
\(oqPBT_OUT\(cq,
|
||||
\(oqPREAMP\(cq,
|
||||
\(oqRAWSTR\(cq,
|
||||
\(oqRF\(cq,
|
||||
\(oqRFPOWER\(cq,
|
||||
\(oqRFPOWER_METER\(cq,
|
||||
\(oqRFPOWER_METER_WATTS\(cq,
|
||||
\(oqSLOPE_HIGH\(cq,
|
||||
\(oqSLOPE_LOW\(cq,
|
||||
\(oqSPECTRUM_ATT\(cq,
|
||||
\(oqSPECTRUM_AVG\(cq,
|
||||
\(oqSPECTRUM_EDGE_HIGH\(cq,
|
||||
\(oqSPECTRUM_EDGE_LOW\(cq,
|
||||
\(oqSPECTRUM_MODE\(cq,
|
||||
\(oqSPECTRUM_REF\(cq,
|
||||
\(oqSPECTRUM_SPAN\(cq,
|
||||
\(oqSPECTRUM_SPEED\(cq,
|
||||
\(oqSQL\(cq,
|
||||
\(oqSTRENGTH\(cq,
|
||||
\(oqSWR\(cq,
|
||||
\(oqTEMP_METER\(cq,
|
||||
\(oqUSB_AF\(cq,
|
||||
\(oqUSB_AF_INPUT\(cq,
|
||||
\(oqVD_METER\(cq,
|
||||
\(oqVOXDELAY\(cq,
|
||||
\(oqVOXGAIN\(cq.
|
||||
.IP
|
||||
The Level Value can be a float or an integer value. For the AGC token the
|
||||
value is one of \(oq0\(cq = OFF, \(oq1\(cq = SUPERFAST, \(oq2\(cq = FAST,
|
||||
|
|
@ -1035,8 +1122,21 @@ Set
|
|||
and
|
||||
.RI \(aq "Parm Value" \(aq.
|
||||
.IP
|
||||
Parm is a token: \(oqANN\(cq, \(oqAPO\(cq, \(oqBACKLIGHT\(cq, \(oqBEEP\(cq,
|
||||
\(oqTIME\(cq, \(oqBAT\(cq, \(oqKEYLIGHT\(cq, \(oqSCREENSAVER\(cq, \(oqAFIF\(cq, \(oqBANDSELECT\(cq, \(oqKEYERTYPE\(cq.
|
||||
Parm is a token:
|
||||
\(oqAFIF\(cq,
|
||||
\(oqAFIF_ACC\(cq,
|
||||
\(oqAFIF_LAN\(cq,
|
||||
\(oqAFIF_WLAN\(cq,
|
||||
\(oqANN\(cq,
|
||||
\(oqAPO\(cq,
|
||||
\(oqBACKLIGHT\(cq,
|
||||
\(oqBANDSELECT\(cq,
|
||||
\(oqBAT\(cq,
|
||||
\(oqBEEP\(cq,
|
||||
\(oqKEYERTYPE\(cq,
|
||||
\(oqKEYLIGHT\(cq,
|
||||
\(oqSCREENSAVER\(cq,
|
||||
\(oqTIME\(cq.
|
||||
.IP
|
||||
.BR Note :
|
||||
Passing a \(oq?\(cq (query) as the first argument instead of a Parm token will
|
||||
|
|
@ -1318,9 +1418,9 @@ Set
|
|||
.IP
|
||||
Sets rig clock -- note that some rigs do not handle seconds or milliseconds.
|
||||
If you try to set sec/msec and rig does not support it you will get a debug warning message.
|
||||
Format is ISO8601,
|
||||
.EX
|
||||
Format is ISO8601.
|
||||
Formats accepted allow for 2-digit or 4-digit time zone
|
||||
.EX
|
||||
YYYY-MM-DDTHH:MM:SS.SSS+ZZ (where +ZZ is either -/+ UTC offset HH)
|
||||
YYYY-MM-DDTHH:MM:SS.SSS+ZZZZ (where +ZZZZ is either -/+ UTC offset HHMM)
|
||||
YYYY-MM-DDTHH:MM:SS+ZZ
|
||||
|
|
@ -1330,6 +1430,7 @@ YYYY-MM-DDTHH:MM+ZZZZ
|
|||
YYYY-MM-DD (sets date only)
|
||||
local (sets both clocks to local time)
|
||||
utc (sets both clocks to utc time)
|
||||
.EE
|
||||
Note: Icom rigs expect you to set local time and the hours off to UTC.
|
||||
So...4PM EST example would be 2021-12-01T16:00:00-0500
|
||||
But...if you want to display GMT you must set the clock for GMT with zero UTC offset.
|
||||
|
|
@ -1337,11 +1438,8 @@ Hopefully Icom will allow displaying either clock in the future
|
|||
|
||||
Note: Kenwood rigs only allow setting local clock, and then only if not autoset by NTP.
|
||||
Trying to set clock when NTP is in use will set the offset, but not the time -
|
||||
and no error status will be returned.
|
||||
and no error status will be returned.
|
||||
Time displayed on the auxiliary clock is solely determined by UTC and the aux offset.
|
||||
|
||||
.EE
|
||||
.
|
||||
.TP
|
||||
.BR get_clock
|
||||
Get
|
||||
|
|
@ -1393,6 +1491,7 @@ before sending the next command to the radio.
|
|||
.TP
|
||||
.BR password " \(aq" \fIPassword\fP \(aq
|
||||
Sends password to rigctld when rigctld has been secured with -A. Must use the 32-char shared secret from rigctld.
|
||||
(NOT IMPLEMENTED)
|
||||
.
|
||||
.TP
|
||||
.BR set_lock_mode " \(aq" \fILocked\fP \(aq
|
||||
|
|
@ -1435,10 +1534,12 @@ For Unix/Linux
|
|||
.
|
||||
.TP
|
||||
.BR client_version " \(aq" \fIString\fP "\(aq
|
||||
Client can send its version to rigctld and get feedback on compatibility, deprecation, and alternatives
|
||||
Client can send its version to
|
||||
.B rigctld
|
||||
and get feedback on compatibility, deprecation, and alternatives
|
||||
.TP
|
||||
.BR hamlib_version
|
||||
Returns hamlib version with ISO8601 date/time
|
||||
Returns Hamlib version with ISO8601 date/time
|
||||
.
|
||||
.TP
|
||||
.BR test
|
||||
|
|
|
|||
|
|
@ -88,7 +88,7 @@ directly through a TCP socket.
|
|||
.
|
||||
.PP
|
||||
Keep in mind that Hamlib is BETA level software. While a lot of backend
|
||||
libraries lack complete rotator support, the basic functions are usually well
|
||||
libraries lack complete rig support, the basic functions are usually well
|
||||
supported.
|
||||
.
|
||||
.PP
|
||||
|
|
@ -110,7 +110,7 @@ Here is a summary of the supported options:
|
|||
.
|
||||
.TP
|
||||
.BR \-m ", " \-\-model = \fIid\fP
|
||||
Select radio model number. Defaults to dummy device.
|
||||
Select radio model number. Defaults to dummy rig.
|
||||
.IP
|
||||
See model list (use \(lqrigctld -l\(rq).
|
||||
.IP
|
||||
|
|
@ -136,7 +136,6 @@ etc. on Linux,
|
|||
etc. on MS Windows. The BSD flavors and Mac OS/X have their own designations.
|
||||
See your system's documentation.
|
||||
.IP
|
||||
.IP
|
||||
Can be a network address:port, e.g.
|
||||
.IR 127.0.0.1:12345
|
||||
.IP
|
||||
|
|
@ -164,7 +163,7 @@ Use
|
|||
of Push-To-Talk device.
|
||||
.IP
|
||||
Supported types are \(oqRIG\(cq (CAT command), \(oqDTR\(cq, \(oqRTS\(cq,
|
||||
\(oqPARALLEL\(cq, \(oqNONE\(cq, overriding PTT type defined in the rig's
|
||||
\(oqPARALLEL\(cq, \(oqCM108\(cq, \(oqGPIO\(cq, \(oqGPION\(cq, \(oqNONE\(cq, overriding PTT type defined in the rig's
|
||||
backend.
|
||||
.IP
|
||||
Some side effects of this command are that when type is set to DTR, read
|
||||
|
|
@ -180,7 +179,7 @@ Use
|
|||
of Data Carrier Detect device.
|
||||
.IP
|
||||
Supported types are \(oqRIG\(cq (CAT command), \(oqDSR\(cq, \(oqCTS\(cq,
|
||||
\(oqCD\(cq, \(oqPARALLEL\(cq, \(oqNONE\(cq.
|
||||
\(oqCD\(cq, \(oqPARALLEL\(cq, \(oqCM108\(cq, \(oqGPIO\(cq, \(oqGPION\(cq, \(oqNONE\(cq.
|
||||
.
|
||||
.TP
|
||||
.BR \-s ", " \-\-serial\-speed = \fIbaud\fP
|
||||
|
|
@ -381,6 +380,10 @@ Should only be needed when controlling software should be "paused"
|
|||
so you can move the VFO. Continuous movement extends the timeout.
|
||||
.
|
||||
.TP
|
||||
.BR \-w ", " \-\-twiddle_rit = \fIseconds\fP
|
||||
Suppress VFOB getfreq so RIT can be twiddled.
|
||||
.
|
||||
.TP
|
||||
.BR \-x ", " \-\-uplink = \fIoption\fP
|
||||
1=Sub, 2=Main
|
||||
.IP
|
||||
|
|
@ -401,6 +404,7 @@ option as it generates no output on its own.
|
|||
Sets password on
|
||||
.B rigctld
|
||||
which requires hamlib to use rig_set_password and rigctl to use \\password to access rigctld. A 32-char shared secret will be displayed to be used on the client side.
|
||||
(NOT IMPLEMENTED)
|
||||
.
|
||||
.TP
|
||||
.BR \-R ", " \-\-rigctld\-idle
|
||||
|
|
@ -518,6 +522,7 @@ Mode is a token: \(oqUSB\(cq, \(oqLSB\(cq, \(oqCW\(cq, \(oqCWR\(cq,
|
|||
\(oqDSB\(cq.
|
||||
.IP
|
||||
Passband is in Hz as an integer, -1 for no change, or \(oq0\(cq for the radio backend default.
|
||||
IC7300 can use 1,2,3 to select which filter to use
|
||||
.IP
|
||||
.BR Note :
|
||||
Passing a \(oq?\(cq (query) as the first argument instead of a Mode token will
|
||||
|
|
@ -709,21 +714,23 @@ Returns TX Mode as a token and TX Passband in Hz as in
|
|||
above.
|
||||
.
|
||||
.TP
|
||||
.BR Y ", " set_ant " \(aq" \fIAntenna\fP \(aq
|
||||
.BR Y ", " set_ant " \(aq" \fIAntenna\fP "\(aq \(aq" \fIOption\fP \(aq
|
||||
Set
|
||||
.RI \(aq Antenna \(aq
|
||||
number (\(oq0\(cq, \(oq1\(cq, \(oq2\(cq, ...).
|
||||
and
|
||||
.RI \(aq Option \(aq.
|
||||
.IP
|
||||
Number is 1-based antenna# (\(oq1\(cq, \(oq2\(cq, \(oq3\(cq, ...).
|
||||
.IP
|
||||
Option depends on rig. For Icom it probably sets the Tx & Rx antennas as in the IC-7851. See your manual for rig specific option values. Most rigs don't care about the option.
|
||||
.IP
|
||||
For the IC-7851 (and perhaps others) it means this:
|
||||
For the IC-7851, FTDX3000 (and perhaps others) it means this:
|
||||
.IP
|
||||
.in +4n
|
||||
.EX
|
||||
1 = TX/RX = ANT1
|
||||
2 = TX/RX = ANT2
|
||||
3 = TX/RX = ANT3
|
||||
1 = TX/RX = ANT1 FTDX3000=ANT1/ANT3
|
||||
2 = TX/RX = ANT2 FTDX3000=ANT2/ANT3
|
||||
3 = TX/RX = ANT3 FTDX3000=ANT3
|
||||
4 = TX/RX = ANT1/ANT4
|
||||
5 = TX/RX = ANT2/ANT4
|
||||
6 = TX/RX = ANT3/ANT4
|
||||
|
|
@ -731,19 +738,29 @@ For the IC-7851 (and perhaps others) it means this:
|
|||
.in
|
||||
.
|
||||
.TP
|
||||
.BR y ", " get_ant
|
||||
.BR y ", " get_ant " \(aq" \fIAntenna\fP \(aq
|
||||
Get
|
||||
.RI \(aq Antenna \(aq
|
||||
number (\(oq0\(cq, \(oq1\(cq, \(oq2\(cq, ...).
|
||||
.IP
|
||||
A value of 0 for Antenna will return the current TX antenna
|
||||
.IP
|
||||
> 0 is 1-based antenna# (\(oq1\(cq, \(oq2\(cq, \(oq3\(cq, ...).
|
||||
.IP
|
||||
Option returned depends on rig. For Icom it is likely the RX only flag.
|
||||
.
|
||||
.TP
|
||||
.BR b ", " send_morse " \(aq" \fIMorse\fP \(aq
|
||||
Send
|
||||
.RI \(aq Morse \(aq
|
||||
symbols. For Yaesu rigs use memory# (1-5 for most rigs) or up to 50 char message (which will use memory#1)
|
||||
|
||||
Example from rigctld socket:
|
||||
.EX
|
||||
Example from rigctld socket: b CQ CQ DE ME
|
||||
Yaesu example to send message#1 frm rigctld socket: b 1
|
||||
b CQ CQ DE ME
|
||||
.EE
|
||||
Yaesu example to send message#1 from rigctld socket:
|
||||
.EX
|
||||
b 1
|
||||
.EE
|
||||
.
|
||||
.TP
|
||||
|
|
@ -857,12 +874,54 @@ Set
|
|||
and
|
||||
.RI \(aq "Func Status" \(aq.
|
||||
.IP
|
||||
Func is a token: \(oqFAGC\(cq, \(oqNB\(cq, \(oqCOMP\(cq, \(oqVOX\(cq,
|
||||
\(oqTONE\(cq, \(oqTSQL\(cq, \(oqSBKIN\(cq, \(oqFBKIN\(cq, \(oqANF\(cq,
|
||||
\(oqNR\(cq, \(oqAIP\(cq, \(oqAPF\(cq, \(oqMON\(cq, \(oqMN\(cq, \(oqRF\(cq,
|
||||
\(oqARO\(cq, \(oqLOCK\(cq, \(oqMUTE\(cq, \(oqVSC\(cq, \(oqREV\(cq,
|
||||
\(oqSQL\(cq, \(oqABM\(cq, \(oqBC\(cq, \(oqMBC\(cq, \(oqRIT\(cq, \(oqAFC\(cq,
|
||||
\(oqSATMODE\(cq, \(oqSCOPE\(cq, \(oqRESUME\(cq, \(oqTBURST\(cq, \(oqTUNER\(cq,
|
||||
Func is a token:
|
||||
\(oqABM\(cq,
|
||||
\(oqAFC\(cq,
|
||||
\(oqAFLT\(cq,
|
||||
\(oqAIP\(cq,
|
||||
\(oqANF\(cq,
|
||||
\(oqANL\(cq,
|
||||
\(oqAPF\(cq,
|
||||
\(oqARO\(cq,
|
||||
\(oqBC2\(cq,
|
||||
\(oqBC\(cq,
|
||||
\(oqCOMP\(cq,
|
||||
\(oqCSQL\(cq,
|
||||
\(oqDIVERSITY\(cq,
|
||||
\(oqDSQL\(cq,
|
||||
\(oqDUAL_WATCH\(cq,
|
||||
\(oqFAGC\(cq,
|
||||
\(oqFBKIN\(cq,
|
||||
\(oqLOCK\(cq,
|
||||
\(oqMBC\(cq,
|
||||
\(oqMN\(cq,
|
||||
\(oqMON\(cq,
|
||||
\(oqMUTE\(cq,
|
||||
\(oqNB2\(cq,
|
||||
\(oqNB\(cq,
|
||||
\(oqNR\(cq,
|
||||
\(oqOVF_STATUS\(cq,
|
||||
\(oqRESUME\(cq,
|
||||
\(oqREV\(cq,
|
||||
\(oqRF\(cq,
|
||||
\(oqRIT\(cq,
|
||||
\(oqSATMODE\(cq,
|
||||
\(oqSBKIN\(cq,
|
||||
\(oqSCEN\(cq,
|
||||
\(oqSCOPE\(cq,
|
||||
\(oqSEND_MORSE\(cq,
|
||||
\(oqSEND_VOICE_MEM\(cq,
|
||||
\(oqSPECTRUM\(cq,
|
||||
\(oqSPECTRUM_HOLD\(cq,
|
||||
\(oqSQL\(cq,
|
||||
\(oqSYNC\(cq,
|
||||
\(oqTBURST\(cq,
|
||||
\(oqTONE\(cq,
|
||||
\(oqTRANSCEIVE\(cq,
|
||||
\(oqTSQL\(cq,
|
||||
\(oqTUNER\(cq,
|
||||
\(oqVOX\(cq,
|
||||
\(oqVSC\(cq,
|
||||
\(oqXIT\(cq.
|
||||
.IP
|
||||
Func Status is a non null value for \(lqactivate\(rq or \(lqde-activate\(rq
|
||||
|
|
@ -895,17 +954,61 @@ Set
|
|||
and
|
||||
.RI \(aq "Level Value" \(aq.
|
||||
.IP
|
||||
Level is a token: \(oqPREAMP\(cq, \(oqATT\(cq, \(oqVOXDELAY\(cq, \(oqAF\(cq,
|
||||
\(oqRF\(cq, \(oqSQL\(cq, \(oqIF\(cq, \(oqAPF\(cq, \(oqNR\(cq, \(oqPBT_IN\(cq,
|
||||
\(oqPBT_OUT\(cq, \(oqCWPITCH\(cq, \(oqRFPOWER\(cq, \(oqMICGAIN\(cq,
|
||||
\(oqKEYSPD\(cq, \(oqNOTCHF\(cq, \(oqCOMP\(cq, \(oqAGC\(cq, \(oqBKINDL\(cq,
|
||||
\(oqBAL\(cq, \(oqMETER\(cq, \(oqVOXGAIN\(cq, \(oqANTIVOX\(cq,
|
||||
\(oqSLOPE_LOW\(cq, \(oqSLOPE_HIGH\(cq, \(oqBKIN_DLYMS\(cq, \(oqRAWSTR\(cq, \(oqSWR\(cq,
|
||||
\(oqALC\(cq, \(oqSTRENGTH\(cq, \(oqRFPOWER_METER\(cq, \(oqCOMPMETER\(cq, \(oqVD_METER\(cq, \(oqID_METER\(cq,
|
||||
\(oqNOTCHF_RAW\(cq, \(oqMONITOR_GAIN\(cq, \(oqNQ\(cq, \(oqRFPOWER_METER_WATTS\(cq, \(oqSPECTRUM_MODE\(cq,
|
||||
\(oqSPECTRUM_SPAN\(cq, \(oqSPECTRUM_EDGE_LOW\(cq, \(oqSPECTRUM_EDGE_HIGH\(cq, \(oqSPECTRUM_SPEED\(cq,
|
||||
\(oqSPECTRUM_REF\(cq, \(oqSPECTRUM_AVG\(cq, \(oqSPECTRUM_ATT\(cq, \(oqTEMP_METER\(cq, \(oqBAND_SELECT\(cq,
|
||||
\(oqUSB_AF\(cq.
|
||||
Level is a token:
|
||||
\(oqAF\(cq,
|
||||
\(oqAGC\(cq,
|
||||
\(oqAGC_TIME\(cq,
|
||||
\(oqALC\(cq,
|
||||
\(oqANTIVOX\(cq,
|
||||
\(oqAPF\(cq,
|
||||
\(oqATT\(cq,
|
||||
\(oqBAL\(cq,
|
||||
\(oqBAND_SELECT\(cq,
|
||||
\(oqBKINDL\(cq,
|
||||
\(oqBKIN_DLYMS\(cq,
|
||||
\(oqCOMP\(cq,
|
||||
\(oqCOMP_METER\(cq,
|
||||
\(oqCWPITCH\(cq,
|
||||
\(oqID_METER\(cq,
|
||||
\(oqIF\(cq,
|
||||
\(oqKEYSPD\(cq,
|
||||
\(oqMETER\(cq,
|
||||
\(oqMGC\(cq,
|
||||
\(oqMGF\(cq,
|
||||
\(oqMGL\(cq,
|
||||
\(oqMICGAIN\(cq,
|
||||
\(oqMONITOR_GAIN\(cq,
|
||||
\(oqNB\(cq,
|
||||
\(oqNOTCHF\(cq,
|
||||
\(oqNOTCHF_RAW\(cq,
|
||||
\(oqNR\(cq,
|
||||
\(oqPBT_IN\(cq,
|
||||
\(oqPBT_OUT\(cq,
|
||||
\(oqPREAMP\(cq,
|
||||
\(oqRAWSTR\(cq,
|
||||
\(oqRF\(cq,
|
||||
\(oqRFPOWER\(cq,
|
||||
\(oqRFPOWER_METER\(cq,
|
||||
\(oqRFPOWER_METER_WATTS\(cq,
|
||||
\(oqSLOPE_HIGH\(cq,
|
||||
\(oqSLOPE_LOW\(cq,
|
||||
\(oqSPECTRUM_ATT\(cq,
|
||||
\(oqSPECTRUM_AVG\(cq,
|
||||
\(oqSPECTRUM_EDGE_HIGH\(cq,
|
||||
\(oqSPECTRUM_EDGE_LOW\(cq,
|
||||
\(oqSPECTRUM_MODE\(cq,
|
||||
\(oqSPECTRUM_REF\(cq,
|
||||
\(oqSPECTRUM_SPAN\(cq,
|
||||
\(oqSPECTRUM_SPEED\(cq,
|
||||
\(oqSQL\(cq,
|
||||
\(oqSTRENGTH\(cq,
|
||||
\(oqSWR\(cq,
|
||||
\(oqTEMP_METER\(cq,
|
||||
\(oqUSB_AF\(cq,
|
||||
\(oqUSB_AF_INPUT\(cq,
|
||||
\(oqVD_METER\(cq,
|
||||
\(oqVOXDELAY\(cq,
|
||||
\(oqVOXGAIN\(cq.
|
||||
.IP
|
||||
The Level Value can be a float or an integer value. For the AGC token the
|
||||
value is one of \(oq0\(cq = OFF, \(oq1\(cq = SUPERFAST, \(oq2\(cq = FAST,
|
||||
|
|
@ -938,8 +1041,21 @@ Set
|
|||
and
|
||||
.RI \(aq "Parm Value" \(aq.
|
||||
.IP
|
||||
Parm is a token: \(oqANN\(cq, \(oqAPO\(cq, \(oqBACKLIGHT\(cq, \(oqBEEP\(cq,
|
||||
\(oqTIME\(cq, \(oqBAT\(cq, \(oqKEYLIGHT\(cq, \(oqBANDSELECT\(cq, \(oqKEYERTYPE\(cq.
|
||||
Parm is a token:
|
||||
\(oqAFIF\(cq,
|
||||
\(oqAFIF_ACC\(cq,
|
||||
\(oqAFIF_LAN\(cq,
|
||||
\(oqAFIF_WLAN\(cq,
|
||||
\(oqANN\(cq,
|
||||
\(oqAPO\(cq,
|
||||
\(oqBACKLIGHT\(cq,
|
||||
\(oqBANDSELECT\(cq,
|
||||
\(oqBAT\(cq,
|
||||
\(oqBEEP\(cq,
|
||||
\(oqKEYERTYPE\(cq,
|
||||
\(oqKEYLIGHT\(cq,
|
||||
\(oqSCREENSAVER\(cq,
|
||||
\(oqTIME\(cq.
|
||||
.IP
|
||||
.BR Note :
|
||||
Passing a \(oq?\(cq (query) as the first argument instead of a Parm token will
|
||||
|
|
@ -1074,7 +1190,8 @@ Set
|
|||
.RI \(aq "Power Status" \(aq.
|
||||
.IP
|
||||
Power Status is a value: \(oq0\(cq = Power Off, \(oq1\(cq = Power On,
|
||||
\(oq2\(cq = Power Standby.
|
||||
\(oq2\(cq = Power Standby (enter standby), \(oq4\(cq = Power Operate (leave
|
||||
standby).
|
||||
.
|
||||
.TP
|
||||
.BR 0x88 ", " get_powerstat
|
||||
|
|
@ -1099,11 +1216,11 @@ Get DTMF
|
|||
Get misc information about the rig.
|
||||
.
|
||||
.TP
|
||||
.BR 0xf5 ", " get_rig_info "
|
||||
Get misc information about the rig vfos and other info.
|
||||
.BR 0xf5 ", " get_rig_info
|
||||
Get misc information about the rig vfo status and other info.
|
||||
.
|
||||
.TP
|
||||
.BR 0xf3 ", " get_vfo_info " \(aq" "\fIVFO\fP" \(aq
|
||||
.BR 0xf3 ", " get_vfo_info " \(aq" \fIVFO\fP \(aq
|
||||
Get misc information about a specific vfo.
|
||||
.
|
||||
.TP
|
||||
|
|
@ -1162,15 +1279,29 @@ Set
|
|||
.RI \(aq DateTime \(aq
|
||||
.IP
|
||||
Sets rig clock -- note that some rigs do not handle seconds or milliseconds.
|
||||
If you try to set that you will get a debug warning message.
|
||||
If you try to set sec/msec and rig does not support it you will get a debug warning message.
|
||||
Format is ISO8601.
|
||||
Formats accepted allow for 2-digit or 4-digit time zone
|
||||
.EX
|
||||
Formats accepted
|
||||
YYYY-MM-DDTHH:MM:SS.sss+ZZ (where +ZZ is either -/+ UTC offset)
|
||||
YYYY-MM-DDTHH:MM:SS.SSS+ZZ (where +ZZ is either -/+ UTC offset HH)
|
||||
YYYY-MM-DDTHH:MM:SS.SSS+ZZZZ (where +ZZZZ is either -/+ UTC offset HHMM)
|
||||
YYYY-MM-DDTHH:MM:SS+ZZ
|
||||
YYYY-MM-DDTHH:MM:SS+ZZZZ
|
||||
YYYY-MM-DDTHH:MM+ZZ
|
||||
YYYY-MM-DDTHH:MM+ZZZZ
|
||||
YYYY-MM-DD (sets date only)
|
||||
local (sets both clocks to local time)
|
||||
utc (sets both clocks to utc time)
|
||||
.EE
|
||||
Note: Icom rigs expect you to set local time and the hours off to UTC.
|
||||
So...4PM EST example would be 2021-12-01T16:00:00-0500
|
||||
But...if you want to display GMT you must set the clock for GMT with zero UTC offset.
|
||||
Hopefully Icom will allow displaying either clock in the future
|
||||
|
||||
Note: Kenwood rigs only allow setting local clock, and then only if not autoset by NTP.
|
||||
Trying to set clock when NTP is in use will set the offset, but not the time -
|
||||
and no error status will be returned.
|
||||
Time displayed on the auxiliary clock is solely determined by UTC and the aux offset.
|
||||
.
|
||||
.TP
|
||||
.BR get_clock
|
||||
|
|
@ -1380,7 +1511,7 @@ the value terminated by the response separator. e.g. \(lqFrequency:
|
|||
.PP
|
||||
4. All commands received will be acknowledged by
|
||||
.B rigctld
|
||||
with records from rules 1 and 2. Records from rule 3 are only returned when
|
||||
with records from rules 1 and 2. Records from rule 3 are only returned when
|
||||
data values must be returned to the client.
|
||||
.
|
||||
.PP
|
||||
|
|
|
|||
|
|
@ -274,6 +274,8 @@ to communicate with a radio connected to Flrig:
|
|||
.
|
||||
.PP
|
||||
.in +4n
|
||||
.EX
|
||||
Flrig -><- rigctlcom -> COM9 <- virt_port_pipe -> COM10 <- N1MM
|
||||
.EE
|
||||
.in
|
||||
.
|
||||
|
|
|
|||
|
|
@ -1296,7 +1296,7 @@ typedef uint64_t setting_t;
|
|||
#define RIG_FUNC_SPECTRUM_HOLD CONSTANT_64BIT_FLAG (44) /*!< \c SPECTRUM_HOLD -- Pause spectrum scope updates ON/OFF */
|
||||
#define RIG_FUNC_SEND_MORSE CONSTANT_64BIT_FLAG (45) /*!< \c SEND_MORSE -- Send specified characters using CW */
|
||||
#define RIG_FUNC_SEND_VOICE_MEM CONSTANT_64BIT_FLAG (46) /*!< \c SEND_VOICE_MEM -- Transmit in SSB message stored in memory */
|
||||
#define RIG_FUNC_OVF_STATUS CONSTANT_64BIT_FLAG (47) /*!< \c OVF -- Read overflow status 0=Off, 1=On */
|
||||
#define RIG_FUNC_OVF_STATUS CONSTANT_64BIT_FLAG (47) /*!< \c OVF_STATUS -- Read overflow status 0=Off, 1=On */
|
||||
#define RIG_FUNC_SYNC CONSTANT_64BIT_FLAG (48) /*!< \c Synchronize VFOS -- FTDX101D/MP for now SY command */
|
||||
#define RIG_FUNC_BIT49 CONSTANT_64BIT_FLAG (49) /*!< \c available for future RIG_FUNC items */
|
||||
#define RIG_FUNC_BIT50 CONSTANT_64BIT_FLAG (50) /*!< \c available for future RIG_FUNC items */
|
||||
|
|
|
|||
|
|
@ -81,7 +81,7 @@
|
|||
* keep up to date SHORT_OPTIONS, usage()'s output and man page. thanks.
|
||||
* TODO: add an option to read from a file
|
||||
*/
|
||||
#define SHORT_OPTIONS "m:r:p:d:P:D:s:S:c:T:t:C:W:w:x:z:lLuovhVZMRA:n:"
|
||||
#define SHORT_OPTIONS "m:r:p:d:P:D:s:S:c:T:t:C:W:w:x:z:lLuovhVZRA:b"
|
||||
static struct option long_options[] =
|
||||
{
|
||||
{"model", 1, 0, 'm'},
|
||||
|
|
@ -1525,12 +1525,13 @@ void usage(void)
|
|||
" -u, --dump-caps dump capabilities and exit\n"
|
||||
" -o, --vfo do not default to VFO_CURR, require extra vfo arg\n"
|
||||
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
|
||||
" -W, --twiddle_timeout timeout after detecting vfo manual change\n"
|
||||
" -w, --twiddle_rit suppress VFOB getfreq so RIT can be twiddled\n"
|
||||
" -W, --twiddle_timeout=SECONDS timeout after detecting vfo manual change\n"
|
||||
" -w, --twiddle_rit=SECONDS suppress VFOB getfreq so RIT can be twiddled\n"
|
||||
" -x, --uplink set uplink get_freq ignore, 1=Sub, 2=Main\n"
|
||||
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
|
||||
" -A, --password set password for rigctld access\n"
|
||||
" -A, --password=PASSWORD set password for rigctld access (NOT IMPLEMENTED)\n"
|
||||
" -R, --rigctld-idle make rigctld close the rig when no clients are connected\n"
|
||||
" -b, --bind-all make rigctld bind to first network device available\n"
|
||||
" -h, --help display this help and exit\n"
|
||||
" -V, --version output version information and exit\n\n",
|
||||
portno);
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue