diff --git a/rigs/icom/ic7760.c b/rigs/icom/ic7760.c new file mode 100644 index 000000000..f101e9726 --- /dev/null +++ b/rigs/icom/ic7760.c @@ -0,0 +1,466 @@ +/* + * Hamlib CI-V backend - description of IC-7760 and variations + * Copyright (c) 2009-2010 by Stephane Fillod + * + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Stre + +#include +#include "token.h" +#include "tones.h" +#include "idx_builtin.h" + +#include "icom.h" +#include "icom_defs.h" +#include "bandplan.h" +#include "frame.h" +#include "misc.h" + +#define IC7760_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM|RIG_MODE_PSK|RIG_MODE_PSKR) +#define IC7760_AM_TX_MODES (RIG_MODE_AM|RIG_MODE_PKTAM) +#define IC7760_ALL_RX_MODES IC7760_OTHER_TX_MODES | IC7760_AM_TX_MODES +#define IC7760_1HZ_TS_MODES IC7760_ALL_RX_MODES + +#define IC7760_FUNCS (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK|RIG_FUNC_RIT|RIG_FUNC_XIT|RIG_FUNC_TUNER|RIG_FUNC_APF) + +#define IC7760_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_ANTIVOX|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC|RIG_LEVEL_RFPOWER_METER|RIG_LEVEL_RFPOWER_METER_WATTS|RIG_LEVEL_COMP_METER|RIG_LEVEL_VD_METER|RIG_LEVEL_ID_METER|RIG_LEVEL_MONITOR_GAIN|RIG_LEVEL_NB|RIG_LEVEL_AGC_TIME) + +#define IC7760_VFOS (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM) +#define IC7760_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT) + +#define IC7760_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE) +#define IC7760_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO) + +#define IC7760_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3|RIG_ANT_4) + +// IC-7760 S-meter calibration data based on manual +#define IC7760_STR_CAL { 3, \ + { \ + { 0,-54 }, \ + { 120, 0 }, \ + { 241, 60 } \ + } } + +#define IC7760_SWR_CAL { 5, \ + { \ + { 0, 1.0f }, \ + { 48, 1.5f }, \ + { 80, 2.0f }, \ + { 120, 3.0f }, \ + { 240, 6.0f } \ + } } + +#define IC7760_ALC_CAL { 2, \ + { \ + { 0, 0.0f }, \ + { 120, 1.0f } \ + } } + +#define IC7760_RFPOWER_METER_CAL { 13, \ + { \ + { 0, 0.0f }, \ + { 21, 5.0f }, \ + { 43, 10.0f }, \ + { 65, 15.0f }, \ + { 83, 20.0f }, \ + { 95, 25.0f }, \ + { 105, 30.0f }, \ + { 114, 35.0f }, \ + { 124, 40.0f }, \ + { 143, 50.0f }, \ + { 183, 75.0f }, \ + { 213, 100.0f }, \ + { 255, 120.0f } \ + } } + + +#define IC7760_COMP_METER_CAL { 3, \ + { \ + { 0, 0.0f }, \ + { 130, 15.0f }, \ + { 241, 30.0f } \ + } } + +#define IC7760_VD_METER_CAL { 4, \ + { \ + { 0, 0.0f }, \ + { 151, 44.0f }, \ + { 180, 48.0f }, \ + { 211, 52.0f } \ + } } + +#define IC7760_ID_METER_CAL { 3, \ + { \ + { 0, 0.0f }, \ + { 165, 10.0f }, \ + { 241, 15.0f } \ + } } + +struct cmdparams ic7760_extcmds[] = +{ + { {.s = RIG_LEVEL_VOXDELAY}, CMD_PARAM_TYPE_LEVEL, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x82}, CMD_DAT_INT, 1 }, + { { 0 } } +}; + +int ic7760_ext_tokens[] = +{ + TOK_DRIVE_GAIN, TOK_DIGI_SEL_FUNC, TOK_DIGI_SEL_LEVEL, TOK_BACKEND_NONE +}; + +/* + * IC-7760 rig capabilities. + */ +static const struct icom_priv_caps ic7760_priv_caps = +{ + 0xb1, /* default address */ + 0, /* 731 mode */ + 0, /* no XCHG */ + ic756pro_ts_sc_list, + .antack_len = 4, + .ant_count = 4, + .agc_levels_present = 1, + .agc_levels = { + { .level = RIG_AGC_OFF, .icom_level = 0 }, + { .level = RIG_AGC_FAST, .icom_level = 1 }, + { .level = RIG_AGC_MEDIUM, .icom_level = 2 }, + { .level = RIG_AGC_SLOW, .icom_level = 3 }, + { .level = RIG_AGC_LAST, .icom_level = -1 }, + }, + .extcmds = ic7760_extcmds, + .x25x26_always = 1, + .x25x26_possibly = 1, + .x1cx03_always = 1, + .x1cx03_possibly = 1, + .x1ax03_supported = 1, + .mode_with_filter = 1, + .data_mode_supported = 1 +}; + +// if hour < 0 then only date will be set +int ic7760_set_clock(RIG *rig, int year, int month, int day, int hour, int min, + int sec, double msec, int utc_offset) +{ + int cmd = 0x1a; + int subcmd = 0x05; + int retval = RIG_OK; + unsigned char prmbuf[MAXFRAMELEN]; + + if (year >= 0) + { + prmbuf[0] = 0x02; + prmbuf[1] = 0x05; + to_bcd(&prmbuf[2], year / 100, 2); + to_bcd(&prmbuf[3], year % 100, 2); + to_bcd(&prmbuf[4], month, 2); + to_bcd(&prmbuf[5], day, 2); + retval = icom_transaction(rig, cmd, subcmd, prmbuf, 6, NULL, NULL); + + if (retval != RIG_OK) + { + rig_debug(RIG_DEBUG_ERR, "%s(%d): %s\b", __func__, __LINE__, rigerror(retval)); + } + } + + if (hour >= 0) + { + prmbuf[0] = 0x02; + prmbuf[1] = 0x06; + to_bcd(&prmbuf[2], hour, 2); + to_bcd(&prmbuf[3], min, 2); + retval = icom_transaction(rig, cmd, subcmd, prmbuf, 4, NULL, NULL); + + if (retval != RIG_OK) + { + rig_debug(RIG_DEBUG_ERR, "%s(%d): %s\b", __func__, __LINE__, rigerror(retval)); + } + + prmbuf[0] = 0x02; + prmbuf[1] = 0x04; + rig_debug(RIG_DEBUG_ERR, "%s: utc_offset=%d\n", __func__, utc_offset); + to_bcd(&prmbuf[2], abs(utc_offset) / 100, 2); + to_bcd(&prmbuf[3], abs(utc_offset) % 100, 2); + to_bcd(&prmbuf[4], utc_offset >= 0 ? 0 : 1, 2); + retval = icom_transaction(rig, cmd, subcmd, prmbuf, 5, NULL, NULL); + + if (retval != RIG_OK) + { + rig_debug(RIG_DEBUG_ERR, "%s(%d): %s\b", __func__, __LINE__, rigerror(retval)); + } + } + + return retval; +} + +int ic7760_get_clock(RIG *rig, int *year, int *month, int *day, int *hour, + int *min, int *sec, double *msec, int *utc_offset) +{ + int cmd = 0x1a; + int subcmd = 0x05; + int retval = RIG_OK; + int resplen; + unsigned char prmbuf[MAXFRAMELEN]; + unsigned char respbuf[MAXFRAMELEN]; + + prmbuf[0] = 0x00; + prmbuf[1] = 0x58; + resplen = sizeof(respbuf); + retval = icom_transaction(rig, cmd, subcmd, prmbuf, 2, respbuf, &resplen); + *year = from_bcd(&respbuf[4], 2) * 100 + from_bcd(&respbuf[5], 2); + *month = from_bcd(&respbuf[6], 2); + *day = from_bcd(&respbuf[7], 2); + + if (hour != NULL) + { + prmbuf[0] = 0x00; + prmbuf[1] = 0x59; + retval = icom_transaction(rig, cmd, subcmd, prmbuf, 2, respbuf, &resplen); + + if (retval != RIG_OK) + { + return retval; + } + + *hour = from_bcd(&respbuf[4], 2); + *min = from_bcd(&respbuf[5], 2); + *sec = 0; + *msec = 0; + + prmbuf[0] = 0x00; + prmbuf[1] = 0x61; + retval = icom_transaction(rig, cmd, subcmd, prmbuf, 2, respbuf, &resplen); + + if (retval != RIG_OK) + { + return retval; + } + + *utc_offset = from_bcd(&respbuf[4], 2) * 100; + *utc_offset += from_bcd(&respbuf[5], 2); + + if (respbuf[6] != 0x00) { *utc_offset *= -1; } + + //rig_debug(RIG_DEBUG_VERBOSE, + // "%s: %02d-%02d-%02dT%02d:%02d:%06.3lf%s%04d\n'", + // __func__, *year, *month, *day, *hour, *min, *sec + *msec / 1000, + // *utc_offset >= 0 ? "+" : "-", (unsigned)abs(*utc_offset)); + } + + return retval; +} + +static int ic7760_rig_open(RIG *rig) +{ + rig_debug(RIG_DEBUG_VERBOSE, "%s: enter\n", __func__); + return icom_rig_open(rig); +} + +struct rig_caps ic7760_caps = +{ + RIG_MODEL(RIG_MODEL_IC7760), + .model_name = "IC-7760", + .mfg_name = "Icom", + .version = BACKEND_VER ".0", + .copyright = "LGPL", + .status = RIG_STATUS_ALPHA, + .rig_type = RIG_TYPE_TRANSCEIVER, + .ptt_type = RIG_PTT_RIG, + .dcd_type = RIG_DCD_RIG, + .port_type = RIG_PORT_SERIAL, + .serial_rate_min = 300, // the manual does not show serial speeds + .serial_rate_max = 19200, + .serial_data_bits = 8, + .serial_stop_bits = 1, + .serial_parity = RIG_PARITY_NONE, + .serial_handshake = RIG_HANDSHAKE_NONE, + .write_delay = 0, + .post_write_delay = 0, + .timeout = 1000, + .retry = 3, + .has_get_func = IC7760_FUNCS, + .has_set_func = IC7760_FUNCS, + .has_get_level = IC7760_LEVELS, + .has_set_level = RIG_LEVEL_SET(IC7760_LEVELS), + .has_get_parm = IC7760_PARMS, + .has_set_parm = RIG_PARM_SET(IC7760_PARMS), /* FIXME: parms */ + .level_gran = + { +#define NO_LVL_KEYSPD +#define NO_LVL_CWPITCH +#include "level_gran_icom.h" +#undef NO_LVL_KEYSPD +#undef NO_LVL_CWPITCH + [LVL_KEYSPD] = { .min = { .i = 6 }, .max = { .i = 48 }, .step = { .i = 1 } }, + [LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 900 }, .step = { .i = 1 } }, + }, + .parm_gran = { + [PARM_BACKLIGHT] = {.min = {.f = 0.0f}, .max = {.f = 1.0f}, .step = {.f = 1.0f / 255.0f}}, + [PARM_BANDSELECT] = {.step = {.s = "BANDUNUSED,BAND160M,BAND80M,BAND40M,BAND30M,BAND20M,BAND17M,BAND15M,BAND12M,BAND10M,BAND6M,BANDGEN"}}, + [PARM_ANN] = {.min = {.i = 0}, .max = {.i = 2}, .step = {.i = 1}}, + }, + + .ext_tokens = ic7760_ext_tokens, + .ctcss_list = common_ctcss_list, + .dcs_list = NULL, + .preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */ + .attenuator = { 6, 12, 18, RIG_DBLST_END, }, + .max_rit = Hz(9999), + .max_xit = Hz(9999), + .max_ifshift = Hz(0), + .agc_level_count = 4, + .agc_levels = { RIG_AGC_OFF, RIG_AGC_FAST, RIG_AGC_MEDIUM, RIG_AGC_SLOW }, + // ?? 7700 can have a different mode on VFOB but requires VFO swap + .targetable_vfo = RIG_TARGETABLE_FREQ | RIG_TARGETABLE_MODE, + .vfo_ops = IC7760_VFO_OPS, + .scan_ops = IC7760_SCAN_OPS, + .transceive = RIG_TRN_RIG, + .bank_qty = 0, + .chan_desc_sz = 0, + + .chan_list = { + { 1, 99, RIG_MTYPE_MEM }, + { 100, 101, RIG_MTYPE_EDGE }, /* two by two */ + { 1, 4, RIG_MTYPE_MORSE }, + RIG_CHAN_END, + }, + + .rx_range_list1 = { {kHz(30), MHz(60), IC7760_ALL_RX_MODES, -1, -1, IC7760_VFOS, IC7760_ANTS}, + RIG_FRNG_END, + }, + .tx_range_list1 = { + FRQ_RNG_HF(1, IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS), + FRQ_RNG_6m(1, IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS), + FRQ_RNG_HF(1, IC7760_AM_TX_MODES, W(5), W(50), IC7760_VFOS, IC7760_ANTS), /* AM class */ + FRQ_RNG_6m(1, IC7760_AM_TX_MODES, W(5), W(50), IC7760_VFOS, IC7760_ANTS), /* AM class */ + RIG_FRNG_END, + }, + + .rx_range_list2 = { {kHz(30), MHz(60), IC7760_ALL_RX_MODES, -1, -1, IC7760_VFOS, IC7760_ANTS}, + RIG_FRNG_END, + }, + .tx_range_list2 = { + FRQ_RNG_HF(2, IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS), + FRQ_RNG_6m(2, IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS), + FRQ_RNG_HF(2, IC7760_AM_TX_MODES, W(5), W(50), IC7760_VFOS, IC7760_ANTS), /* AM class */ + FRQ_RNG_6m(2, IC7760_AM_TX_MODES, W(5), W(50), IC7760_VFOS, IC7760_ANTS), /* AM class */ + /* USA only, TBC: end of range and modes */ + {MHz(5.33050), MHz(5.33350), IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS}, /* USA only */ + {MHz(5.34650), MHz(5.34950), IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS}, /* USA only */ + {MHz(5.36650), MHz(5.36950), IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS}, /* USA only */ + {MHz(5.37150), MHz(5.37450), IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS}, /* USA only */ + {MHz(5.40350), MHz(5.40650), IC7760_OTHER_TX_MODES, W(5), W(200), IC7760_VFOS, IC7760_ANTS}, /* USA only */ + RIG_FRNG_END, + }, + + .tuning_steps = { + {IC7760_1HZ_TS_MODES, 1}, + {IC7760_ALL_RX_MODES, Hz(100)}, + {IC7760_ALL_RX_MODES, kHz(1)}, + {IC7760_ALL_RX_MODES, kHz(5)}, + {IC7760_ALL_RX_MODES, kHz(9)}, + {IC7760_ALL_RX_MODES, kHz(10)}, + {IC7760_ALL_RX_MODES, kHz(12.5)}, + {IC7760_ALL_RX_MODES, kHz(20)}, + {IC7760_ALL_RX_MODES, kHz(25)}, + RIG_TS_END, + }, + /* mode/filter list, remember: order matters! */ + .filters = { + {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(2.4)}, + {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(1.8)}, + {RIG_MODE_SSB | RIG_MODE_PKTLSB | RIG_MODE_PKTUSB, kHz(3)}, + {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_PSK | RIG_MODE_PSKR, Hz(400)}, + {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR | RIG_MODE_PSK | RIG_MODE_PSKR, Hz(50)}, + {RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_PSK | RIG_MODE_PSKR, kHz(1.0)}, + {RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)}, + {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(6)}, + {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(3)}, + {RIG_MODE_AM | RIG_MODE_PKTAM, kHz(9)}, + {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(12)}, + {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(8)}, + {RIG_MODE_FM | RIG_MODE_PKTFM, kHz(15)}, + RIG_FLT_END, + }, + .str_cal = IC7760_STR_CAL, + .swr_cal = IC7760_SWR_CAL, + .alc_cal = IC7760_ALC_CAL, + .rfpower_meter_cal = IC7760_RFPOWER_METER_CAL, + .comp_meter_cal = IC7760_COMP_METER_CAL, + .vd_meter_cal = IC7760_VD_METER_CAL, + .id_meter_cal = IC7760_ID_METER_CAL, + + .cfgparams = icom_cfg_params, + .set_conf = icom_set_conf, + .get_conf = icom_get_conf, + + .priv = (void *)& ic7760_priv_caps, + .rig_init = icom_init, + .rig_cleanup = icom_cleanup, + .rig_open = ic7760_rig_open, + .rig_close = icom_rig_close, + + .set_freq = icom_set_freq, + .get_freq = icom_get_freq, + .set_mode = icom_set_mode, + .get_mode = icom_get_mode, + .set_vfo = icom_set_vfo, +// .get_vfo = icom_get_vfo, + .set_ant = icom_set_ant, + .get_ant = icom_get_ant, + + .set_rit = icom_set_rit_new, + .get_rit = icom_get_rit_new, + .get_xit = icom_get_rit_new, + .set_xit = icom_set_xit_new, + + .decode_event = icom_decode_event, + .set_level = icom_set_level, + .get_level = icom_get_level, + .set_ext_level = icom_set_ext_level, + .get_ext_level = icom_get_ext_level, + .set_func = icom_set_func, + .get_func = icom_get_func, + .set_parm = icom_set_parm, + .get_parm = icom_get_parm, + .set_mem = icom_set_mem, + .vfo_op = icom_vfo_op, + .scan = icom_scan, + .set_ptt = icom_set_ptt, + .get_ptt = icom_get_ptt, + .get_dcd = icom_get_dcd, + .set_ts = icom_set_ts, + .get_ts = icom_get_ts, + .set_ctcss_tone = icom_set_ctcss_tone, + .get_ctcss_tone = icom_get_ctcss_tone, + .set_ctcss_sql = icom_set_ctcss_sql, + .get_ctcss_sql = icom_get_ctcss_sql, + .set_split_freq = icom_set_split_freq, + .get_split_freq = icom_get_split_freq, + .set_split_mode = icom_set_split_mode, + .get_split_mode = icom_get_split_mode, + .set_split_vfo = icom_set_split_vfo, + .get_split_vfo = icom_get_split_vfo, + .set_powerstat = icom_set_powerstat, + .get_powerstat = icom_get_powerstat, + .send_morse = icom_send_morse, + .stop_morse = icom_stop_morse, + .wait_morse = rig_wait_morse, + .set_clock = ic7760_set_clock, + .get_clock = ic7760_get_clock, + .hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS +};