20060922:

Update:
		Applied Icom patches received 4 Sep 2006 from Kent
		Hill, AD7AI


git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2116 7ae35d74-ebe9-4afe-98af-79ac388436b8

ChangeLog

@@ -1,3 +1,17 @@
+2006-09-04  AD7AI <fuzzballz@comcast.net>
+ 
+ 	* Changed Icom make_cmd_frame code to accept multi-byte subcommands;
+ 
+ 	* Added HAMLIB_API rig_ext_lookup_tok	to return pointer ext parameter table with token input.
+ 
+ 	* Added icom_get_dsp_filter to allow lib to read the programable filter assignments.  This includes
+ 	the rtty filter modes for some of the dsp rigs.  Does not allow them to be set yet.
+ 
+ 	* Added get/set_ext_parm code for IC746 pro and fixed the 756proII/III ext_parm code.
+ 	This should be easily modified for the IC7000 and 7800 ext parameters.
+ 	
+ 	* fixed misc mismatched sign warnings on parameters.
+ 
 2006-07-30  AD7AI <fuzzballz@comcast.net>
 
 	*  RIG_SETTING_MAX changed back to 32 and rigctl and rigmatrix corrected to reflect 32

icom/frame.c

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - low level communication routines
  *  Copyright (c) 2000-2006 by Stephane Fillod
  *
- *	$Id: frame.c,v 1.29 2006-07-18 22:51:42 n0nb Exp $
+ *	$Id: frame.c,v 1.30 2006-09-22 19:55:58 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -63,9 +63,17 @@ int make_cmd_frame(char frame[], char re_id, char cmd, int subcmd, const unsigne
 	frame[i++] = re_id;
 	frame[i++] = CTRLID;
 	frame[i++] = cmd;
-	if (subcmd != -1) 
+	if (subcmd != -1) {
+#ifdef MULTIB_SUBCMD
+		register int j;
+		if (j = subcmd & 0xff0000) {  /* allows multi-byte subcmd for dsp rigs */
+			frame[i++] = j >> 16;
+			frame[i++] = (subcmd & 0xff00) >> 8;
+		}
+		else if (j = subcmd & 0xff00) frame[i++] = j >> 8;
+#endif
 		frame[i++] = subcmd & 0xff;
-		
+	}	
 	if (data_len != 0) {
 		memcpy(frame+i, data, data_len);
 		i += data_len;
@@ -283,7 +291,7 @@ int read_icom_frame(hamlib_port_t *p, unsigned char rxbuffer[])
  * assumes rig!=NULL
  */
 int rig2icom_mode(RIG *rig, rmode_t mode, pbwidth_t width, 
-				unsigned char *md, char *pd)
+				unsigned char *md, signed char *pd)
 {
 	unsigned char icmode;
 	signed char icmode_ext;
@@ -354,6 +362,8 @@ void icom2rig_mode(RIG *rig, unsigned char md, int pd, rmode_t *mode, pbwidth_t
 	case S_LSB:	*mode = RIG_MODE_LSB; break;
 	case S_RTTY:	*mode = RIG_MODE_RTTY; break;
 	case S_RTTYR:	*mode = RIG_MODE_RTTYR; break;
+	case S_PSK:	*mode = RIG_MODE_PKTUSB; break;	/* IC-7800 */
+	case S_PSKR:	*mode = RIG_MODE_PKTLSB; break;
 	case 0xff:	*mode = RIG_MODE_NONE; break;	/* blank mem channel */
 
 	default:
@@ -362,18 +372,24 @@ void icom2rig_mode(RIG *rig, unsigned char md, int pd, rmode_t *mode, pbwidth_t
 		*mode = RIG_MODE_NONE;
 	}
 	
-	/* Most rigs return 1-wide, 2-normal,3-narrow  see defs of PD_NARROW etc in the ICOM_defs file.  That is what the rig2icom func uses. */
+	/* Most rigs return 1-wide, 2-narrow; or if it has 3 filters: 1-wide, 2-middle, 3-narrow. (Except for the 706 mkIIg 0-wide, 1-middle, 2-narrow.)  For DSP rigs these are presets, which can be programmed for 30 - 41 bandwidths, depending on mode  */
 
+	if (rig->caps->rig_model == RIG_MODEL_IC706MKIIG || rig->caps->rig_model == RIG_MODEL_IC706 || rig->caps->rig_model ==  RIG_MODEL_IC706MKII) pd--;
 	
 	switch (pd) {
+		case 0x01: if (!(*width = rig_passband_wide(rig, *mode)))  /* if no wide filter defined it's the default */
+				 *width = rig_passband_normal(rig, *mode);
+			    break;
+		case 0x02: if (*width = rig_passband_wide(rig, *mode))
+			 *width = rig_passband_normal(rig, *mode); 
+			   else *width = rig_passband_narrow(rig, *mode); /* This really just depends on how you program the table. */
+			   break;
 		case 0x03: *width = rig_passband_narrow(rig, *mode); break;
-		case 0x02: *width = rig_passband_normal(rig, *mode); break;
-		case 0x01: *width = rig_passband_wide(rig, *mode); break;
 		case -1: break;		/* no passband data */
 	
 	default:
-		rig_debug(RIG_DEBUG_ERR,"icom: Unsupported Icom mode width %#.2x\n",
+		rig_debug(RIG_DEBUG_ERR,"icom: Unsupported Icom mode width %#.2x\n", pd);
-						pd);
 	}
+return ;
 }
 

icom/frame.h

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - low level communication header
  *  Copyright (c) 2000-2005 by Stephane Fillod
  *
- *	$Id: frame.h,v 1.15 2006-07-18 22:51:42 n0nb Exp $
+ *	$Id: frame.h,v 1.16 2006-09-22 19:55:58 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -33,7 +33,7 @@ int make_cmd_frame(char frame[], char re_id, char cmd, int subcmd, const unsigne
 int icom_transaction (RIG *rig, int cmd, int subcmd, const unsigned char *payload, int payload_len, unsigned char *data, int *data_len);
 int read_icom_frame(hamlib_port_t *p, unsigned char rxbuffer[]);
 
-int rig2icom_mode(RIG *rig, rmode_t mode, pbwidth_t width, unsigned char *md, char *pd);
+int rig2icom_mode(RIG *rig, rmode_t mode, pbwidth_t width, unsigned char *md, signed char *pd);
 void icom2rig_mode(RIG *rig, unsigned char md, int pd, rmode_t *mode, pbwidth_t *width);
 
 #endif /* _FRAME_H */

icom/ic746.c

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - description of IC-746 and variations
  *  Copyright (c) 2000-2003 by Stephane Fillod
  *
- *	$Id: ic746.c,v 1.6 2006-07-18 22:51:42 n0nb Exp $
+ *	$Id: ic746.c,v 1.7 2006-09-22 19:55:58 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -43,11 +43,9 @@
  *
  * TODO:
  * 	- advanced scanning functions
- * 	- fix: set_ant 0x12,[1|2]
  * 	- set_channel
  * 	- set_ctcss_tone/ctcss_sql
  * 	- set keyer?
- * 	- read IF filter setting?
  * 	- test all that stuff..
  */
 
@@ -156,6 +154,8 @@ typedef channel_str_t band_stack_reg_t;
 static int ic746_set_parm(RIG *rig, setting_t parm, value_t val);
 static int ic746_get_parm(RIG *rig, setting_t parm, value_t *val);
 static int ic746pro_get_channel(RIG *rig, channel_t *chan);
+static int ic746pro_set_ext_parm(RIG *rig, token_t token, value_t val);
+static int ic746pro_get_ext_parm(RIG *rig, token_t token, value_t *val);
 
 
 /*
@@ -313,6 +313,55 @@ const struct rig_caps ic746_caps = {
 };
 
 
+ /*IC-746Pro Rig parameters Only available in this namespace*/
+#define S_MEM_SC_LEN		2	/* 756PRO S_MEM subcmd length */
+#define S_MEM_LCD_CONT		0x501	/* LCD Contrast 0-256/0-100% */
+#define S_MEM_BKLIT		0x502	/* Backlight  0-256/0-100% */
+#define S_MEM_BEEP		0x506	/* Button confirmation */
+#define S_MEM_SQL_CTL		0x508	/* RF/SQL ctl set 0=auto; 1 = sql; 2 = RF+SQL */
+#define S_MEM_QSPLT		0x511	/* enable quick split mode */
+					/* values -9.999 MHz to + 9.999 Mhz */
+#define S_MEM_SPLT_OFST		0x512	/* default split offset 4 bytes little endian last byte sign*/
+#define S_MEM_SPLT_LOCK		0x513	/* split lock set */
+					/* values 0.000 MHz to + 9.999 Mhz */
+#define S_MEM_HF_DUP_OFST	0x514	/* default HF band duplex offset 3 byte little endian */
+#define S_MEM_6M_DUP_OFST	0x515	/* default 50 mHz duplex offset  3 byte little endian */
+#define S_MEM_2M_DUP_OFST	0x516	/* default 144 MHz duplex offset  3 byte little endian */
+#define S_MEM_AUTO_RPTR		0x518	/* auto repeater set 0=OFF; 1=ON-1; 2=ON-2 */
+#define S_MEM_LANG		0x523	/* 0=English 1=Japanese for voice announcer */
+#define S_MEM_TRCV		0x536	/* CI-V trancieve mode */
+#define S_MEM_CMP_LVL		0x538	/* speech compressor level 0-10 */
+#define S_MEM_SBASS		0x539	/* SSB TX tone bass level */
+#define S_MEM_RTTY_FL_PB	0x562	/* 0=250 Hz, 1=300' 2 = 350, 3 = 500, 4 = 1 KHz */
+#define S_MEM_RTTY_TWNPK	0x563	/* rtty twin peak filter off/on */
+#define S_MEM_SCN_SPD		0x570	/* 0 = low; 1 = high */
+#define S_MEM_NB_LVL		0x572	/* NB level 0-255 */
+#define S_MEM_VOX_GN_LVL	0x573	/* vox gain */
+#define S_MEM_AVOX_GN_LVL	0x574	/* anti-vox gain */
+#define S_MEM_VOX_DEL_LVL	0x575	/* vox delay 0=0 - 20=2.0 sec */
+
+static const struct confparams ic746pro_ext_parms[] = {
+	{ TOK_SSBBASS, "ssbbass", "SSB Tx Tone (Bass)", "SSB Tx Tone (Bass)",
+		NULL, RIG_CONF_NUMERIC, { .n = { 0, 10, 1 } }
+	},
+	{ TOK_SQLCTRL, "sqlctrl", "RF/Sql control", "set RF/Squelch control",
+		NULL, RIG_CONF_COMBO, { .c = {{ "Auto", "Sql", "RF+Sql", NULL }} }
+	},
+	{ TOK_RTTY_FLTR, "rttyfltr", "RTTY Fltr Width preset", "Set/Read RTTY preset filter width",
+		"3", RIG_CONF_COMBO, { .c = {{"250", "300", "350", "500", "1000", NULL }} }
+	},
+	{ RIG_CONF_END, NULL, }
+};
+
+
+/*
+ * NUMERIC: val.f
+ * COMBO: val.i, starting from 0
+ * STRING: val.cs for set, val.s for get
+ * CHECKBUTTON: val.i 0/1
+ */
+ 
+
 /*
  * ic746pro rig capabilities.
  */
@@ -353,6 +402,7 @@ const struct rig_caps ic746pro_caps = {
 	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
 	},
 .parm_gran =  {},
+.extparms = ic746pro_ext_parms,
 .ctcss_list =  common_ctcss_list,
 .dcs_list =  full_dcs_list,
 .preamp =   { 10, 20, RIG_DBLST_END, },	/* FIXME: TBC */
@@ -425,7 +475,7 @@ const struct rig_caps ic746pro_caps = {
 		{RIG_MODE_FM, kHz(15)},
 		{RIG_MODE_FM, kHz(7)},
 
- /* There are 5 rtty filters when rtty filter mode is set (default condition) { 1k, 500, 350, 300, 250 }. These are fixed. If rtty filter mode is unset there are 3 general IF filters { 2.4k, 500, 250 are the defaults }.  These can be changed. There is a "twin-peak" filter mode as well.  It boosts the 2125 and 2295 recieve frequency reponse.    I'm not sure what the icom_defs S_FUNC_RNF (rtty notch filter) is supposed to refer to, it has no notch function, but, the commands turns the rtty filter mode on and off.  Changed to S_FUNC_RF */
+ /* There are 5 rtty filters when rtty filter mode is set (default condition) { 1k, 500, 350, 300, 250 }. These are fixed. If rtty filter mode is unset there are 3 general IF filters { 2.4k, 500, 250 are the defaults }.  These can be changed. There is a "twin-peak" filter mode as well.  It boosts the 2125 and 2295 recieve frequency reponse.    The S_FUNC_RF (rtty filter) turns the rtty filter mode on and off. */
 
 		{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(500)}, /* RTTY &  "normal" IF Filters */
 		{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(250)}, /* RTTY & "narrow" IF Filters */
@@ -487,10 +537,155 @@ const struct rig_caps ic746pro_caps = {
 .get_split_mode =  icom_get_split_mode,
 .set_split_vfo =  icom_set_split_vfo,
 .get_split_vfo =  NULL,
+.set_ext_parm =  ic746pro_set_ext_parm,
+.get_ext_parm =  ic746pro_get_ext_parm,
 .get_channel = ic746pro_get_channel,
 };
 
 
+/*
+ * Assumes rig!=NULL, rig->state.priv!=NULL
+ */
+static int ic746pro_set_ext_parm(RIG *rig, token_t token, value_t val)
+{
+	struct icom_priv_data *priv;
+	struct rig_state *rs;
+	unsigned char epbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
+	int ack_len, ep_len, val_len;
+	int ep_cmd = C_CTL_MEM;
+	int ep_sc;             /* Subcommand in $1A $05xx */
+	int icom_val = 0;
+	int retval;
+
+	rs = &rig->state;
+	priv = (struct icom_priv_data*)rs->priv;
+
+	ep_len = 0;	/* 0 implies BCD data */
+	val_len = 1;
+
+	switch(token) {
+	case TOK_SSBBASS:
+		ep_sc = S_MEM_SBASS ;
+		icom_val = val.f;
+		break;
+	case TOK_SQLCTRL:
+		ep_sc = S_MEM_SQL_CTL;
+		/* TODO: check range this actually doesn't decode the input type 'string' */
+		icom_val = val.i;
+		break;
+	case TOK_RTTY_FLTR:	/* RTTY filter mode 0 - 4 = 250, 300, 350, 500, 1000 */
+		if (val.f < 0 || val.f > 4) return -RIG_EINVAL;
+		ep_sc = S_MEM_RTTY_FL_PB;
+		icom_val = val.f;
+		break;
+	default:
+		return -RIG_EINVAL;
+	}
+
+	if (ep_len == 0) {
+		to_bcd_be(epbuf, (long long)icom_val, val_len*2);
+		ep_len += val_len;
+	}
+
+	retval = icom_transaction (rig, ep_cmd, ep_sc, epbuf, ep_len,
+						ackbuf, &ack_len);
+	if (retval != RIG_OK)
+		return retval;
+
+	if (ack_len != 1 || ackbuf[0] != ACK) {
+		rig_debug(RIG_DEBUG_ERR, "%s: ack NG (%#.2x), "
+			"len=%d\n", __FUNCTION__, ackbuf[0], ack_len);
+		return -RIG_ERJCTED;
+	}
+	return RIG_OK;
+}
+
+/*
+ * Assumes rig!=NULL, rig->state.priv!=NULL
+ *  and val points to a buffer big enough to hold the conf value.
+ */
+static int ic746pro_get_ext_parm(RIG *rig, token_t token, value_t *val)
+{
+	struct icom_priv_data *priv;
+	struct rig_state *rs;
+	const struct confparams *cfp;
+	
+	unsigned char resbuf[MAXFRAMELEN];
+	int res_len, icom_val;
+	int cmdhead;
+	int retval;
+	
+	int ep_cmd = C_CTL_MEM;
+	int ep_sc;             /* Subcommand in $1A $05xx */
+
+	rs = &rig->state;
+	priv = (struct icom_priv_data*)rs->priv;
+
+	switch(token) {
+	case TOK_SSBBASS:
+		ep_sc = S_MEM_SBASS ;
+		break;
+	case TOK_SQLCTRL:
+		ep_sc = S_MEM_SQL_CTL;
+		break;
+	case TOK_RTTY_FLTR:	/* RTTY filter mode 0 - 4 */
+		ep_sc = S_MEM_RTTY_FL_PB;
+		break;
+	default:
+		rig_debug(RIG_DEBUG_ERR,"Unsupported get_ext_parm %d", token);
+		return -RIG_EINVAL;
+	}
+	
+	retval = icom_transaction (rig, ep_cmd, ep_sc, NULL, 0,
+					resbuf, &res_len);
+	if (retval != RIG_OK)
+		return retval;
+
+	/*
+	 * strbuf should contain Cn,Sc,Data area
+	 */
+	cmdhead = (ep_sc == -1) ? 1:S_MEM_SC_LEN + 1;
+	res_len -= cmdhead;
+/* should echo cmd, subcmd and then data, if you get an ack something is wrong */
+	if (resbuf[0] != ep_cmd) {
+		if (resbuf[0] == ACK) {
+				rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
+			"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+		return -RIG_EPROTO;
+		}
+		else {
+			rig_debug(RIG_DEBUG_ERR,"%s: ack NG (%#.2x), "
+				"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+		return -RIG_ERJCTED;
+		}
+	}
+	cfp = rig_ext_lookup_tok(rig, token);
+	switch(cfp->type) {
+		case RIG_CONF_STRING:
+		 memcpy(val->s, resbuf, res_len);
+		break;
+		case RIG_CONF_COMBO:
+		 val->i = from_bcd_be(resbuf+cmdhead, res_len*2);
+		break;
+		case RIG_CONF_NUMERIC:
+		 val->f = from_bcd_be(resbuf+cmdhead, res_len*2);
+		break;
+		default:
+		 rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
+			"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+		return -RIG_EPROTO;
+		
+	/* The examples of code usage for RIG_CONF_NUMERIC types seems to be restricted to raw floating 
+	 point values.  Although the Val definitions allow both integer and  floating point types  The combo
+	 types appear to be left in undecoded form*/
+	}
+	rig_debug(RIG_DEBUG_TRACE,"%s: %d %d %d %f\n",
+			__FUNCTION__, res_len, icom_val, val->i, val->f);
+	
+	return RIG_OK;
+}
+
+
 /*
  * icom_set_parm
  * Assumes rig!=NULL
@@ -517,10 +712,9 @@ int ic746_set_parm(RIG *rig, setting_t parm, value_t val)
 		else {
 			if ((val.i == RIG_ANN_ENG)||(val.i == RIG_ANN_JAP)) {
 				prm_cn = C_CTL_MEM;
-				prm_sc = S_MEM_LANG >> 8;
+				prm_sc = S_MEM_LANG;
-				prmbuf[0] = S_MEM_LANG & 0xff;
+				prm_len = 1;
-				prm_len = 2;
+				prmbuf[0] = (val.i == RIG_ANN_ENG ? 0 : 1);
-				prmbuf[1] = (val.i == RIG_ANN_ENG ? 0 : 1);
 			}
 			else {
 				rig_debug(RIG_DEBUG_ERR,"Unsupported set_parm_ann %d\n", val.i);
@@ -529,14 +723,14 @@ int ic746_set_parm(RIG *rig, setting_t parm, value_t val)
 		}
 		break;
 	case RIG_PARM_BACKLIGHT:
-		prmbuf[0] = S_MEM_BKLIT;
+		prm_sc = S_MEM_BKLIT;
-		prm_len = 3;
+		prm_len = 2;
 		icom_val =  val.f * 255 ;
 		to_bcd_be(prmbuf + 1, (long long)icom_val, 4);
 		break;
 	case RIG_PARM_BEEP:
-		prmbuf[0] = S_MEM_BEEP;
+		prm_sc = S_MEM_BEEP;
-		prm_len = 2;
+		prm_len = 1;
 		prmbuf[1] = val.i;
 		break;
 	default:
@@ -564,28 +758,27 @@ int ic746_set_parm(RIG *rig, setting_t parm, value_t val)
  */
 int ic746_get_parm(RIG *rig, setting_t parm, value_t *val)
 {
-	unsigned char resbuf[MAXFRAMELEN], data;
+	unsigned char resbuf[MAXFRAMELEN];
 	int res_len, icom_val;
 	int prm_cn, prm_sc;
 	int cmdhead;
 	int retval;
 
 	prm_cn = C_CTL_MEM;
-	prm_sc = S_MEM_PARM;
 
 	switch (parm) {
 	case RIG_PARM_BACKLIGHT:
-		data = S_MEM_BKLIT;
+		prm_sc = S_MEM_BKLIT;
 		break;
 	case RIG_PARM_BEEP:
-		data = S_MEM_BEEP;
+		prm_sc = S_MEM_BEEP;
 		break;
 	default:
 		rig_debug(RIG_DEBUG_ERR,"Unsupported get_parm %d", parm);
 		return -RIG_EINVAL;
 	}
 
-	retval = icom_transaction (rig, prm_cn, prm_sc, &data, 1,
+	retval = icom_transaction (rig, prm_cn, prm_sc, NULL, 0,
 					resbuf, &res_len);
 	if (retval != RIG_OK)
 		return retval;
@@ -609,7 +802,7 @@ int ic746_get_parm(RIG *rig, setting_t parm, value_t *val)
 		}
 	}
 
-	icom_val = from_bcd_be(resbuf+cmdhead, res_len*2);	/* is this method necessary? Why not just use unsigned char directly on the buf ? */
+	icom_val = from_bcd_be(resbuf+cmdhead, res_len*2);	
 	if (RIG_PARM_IS_FLOAT(parm))
 		val->f = (float)icom_val/255;
 	else
@@ -631,7 +824,7 @@ int ic746pro_get_channel(RIG *rig, channel_t *chan)
 {
 		struct icom_priv_data *priv;
 		struct rig_state *rs;
-		unsigned char chanbuf[46], databuf[32], data;
+		unsigned char chanbuf[46], databuf[32];
 		mem_buf_t *membuf;
 		int chan_len, freq_len, retval, data_len, sc, band;
 
@@ -682,7 +875,7 @@ int ic746pro_get_channel(RIG *rig, channel_t *chan)
 		strcpy(chan->channel_desc, "         ");
 		
 		/*
-		 * freqbuf should contain Cn,Sc,Data area
+		 * chanbuf should contain Cn,Sc, Chan #, Data area
 		 */
 		if ((chan_len != freq_len*2+40) && (chan_len != 1)) {
 				rig_debug(RIG_DEBUG_ERR,"ic746pro_get_channel: wrong frame len=%d\n",
@@ -712,12 +905,11 @@ int ic746pro_get_channel(RIG *rig, channel_t *chan)
 			/* offset is default for the band & is not stored in channel memory.
 		 	  The following retrieves the system default for the band */
 			band = (int) chan->freq / 1000000;  /* hf, 2m or 6 m */
-			sc = S_MEM_PARM;
+			if (band < 50 ) sc = S_MEM_HF_DUP_OFST;
-			if (band < 50 ) data = S_MEM_HF_DUP_OFST;
+			else if (band < 108) sc = S_MEM_6M_DUP_OFST;
-			else if (band < 108) data = S_MEM_6M_DUP_OFST;
+			else sc = S_MEM_2M_DUP_OFST;
-			else data = S_MEM_2M_DUP_OFST;
 			retval = icom_transaction (rig, C_CTL_MEM, sc,
-						&data, 1, databuf, &data_len);
+						NULL, 0 , databuf, &data_len);
 			if (retval != RIG_OK)
 				return retval;
 			chan->rptr_offs = from_bcd(databuf + 3, 6) * 100;
@@ -726,7 +918,7 @@ int ic746pro_get_channel(RIG *rig, channel_t *chan)
 			chan->ctcss_sql = from_bcd_be(membuf->rx.tone_sql, 6);
 			chan->dcs_code = from_bcd_be(membuf->rx.dcs.code, 4);
 			/* The dcs information include in the channel includes polarity information 
-			for both tx and recieve.  Both directions are enabled when in dcs mode */
+			for both tx and receive.  Both directions are enabled when in dcs mode */
 
 			chan->tx_freq = from_bcd(membuf->tx.freq, freq_len*2);
 			icom2rig_mode(rig, membuf->tx.mode, membuf->tx.pb,

icom/ic756.c

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - description of IC-756 and variations
  *  Copyright (c) 2000-2004 by Stephane Fillod
  *
- *	$Id: ic756.c,v 1.13 2006-07-18 22:51:42 n0nb Exp $
+ *	$Id: ic756.c,v 1.14 2006-09-22 19:55:58 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -44,7 +44,7 @@
 /* 
  * 100W in all modes but AM (40W)
  */ 
-#define IC756_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
+#define IC756_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
 #define IC756_AM_TX_MODES (RIG_MODE_AM)
 
 #define IC756PRO_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_RF)
@@ -380,10 +380,8 @@ static const struct icom_priv_caps ic756pro2_priv_caps = {
 /*
  * These TOKEN_BACKEND's are on a different name space than conf's
  */
-#define TOK_SSBBASS TOKEN_BACKEND(1)
+#define TOK_MEMNAME TOKEN_BACKEND(1)
-#define TOK_MEMNAME TOKEN_BACKEND(2)
+#define TOK_MYCALL  TOKEN_BACKEND(2)
-#define TOK_SQLCTRL TOKEN_BACKEND(3)
-#define TOK_MYCALL  TOKEN_BACKEND(4)
 
 static const struct confparams ic756pro2_ext_parms[] = {
 	{ TOK_SSBBASS, "ssbbass", "SSB Tx Tone (Bass)", "SSB Tx Tone (Bass)",
@@ -398,6 +396,9 @@ static const struct confparams ic756pro2_ext_parms[] = {
 	{ TOK_MYCALL, "mycall", "Callsign", "My call sign",
 		NULL, RIG_CONF_STRING, { }
 	},
+	{ TOK_RTTY_FLTR, "rttyfltr", "RTTY Fltr Width preset", "Set/Read RTTY preset filter width",
+		"3", RIG_CONF_COMBO, { .c = {{"250", "300", "350", "500", "1000", NULL }} }
+	},
 	{ RIG_CONF_END, NULL, }
 };
 
@@ -409,12 +410,27 @@ static const struct confparams ic756pro2_ext_parms[] = {
  * CHECKBUTTON: val.i 0/1
  */
  
+ /*IC-756Pro Rig parameters Only available in this namespace*/
+#define S_MEM_SC_LEN		2	/* 756PRO S_MEM subcmd length */
+#define S_MEM_SBASS		0x501	/* SSB TX tone bass level */
+#define S_MEM_NAME		0x514	/* send/read memory name */
+#define S_MEM_MYCALL		0x515
+#define S_MEM_BEEP		0x520	/* Button confirmation */
+#define S_MEM_SQL_CTL		0x522	/* RF/SQL ctl set 0=auto; 1 = sql; 2 = RF+SQL */
+#define S_MEM_QSPLT		0x524	/* enable quick split mode */
+#define S_MEM_TRCV		0x532	/* CI-V trancieve mode */
+#define S_MEM_LANG		0x536	/* 0=English 1=Japanese for voice announcer */
+#define S_MEM_SCN_SPD		0x556	/* 0 = low; 1 = high */
+#define S_MEM_RTTY_FL_PB	0x561	/* 0=250 Hz, 1=300' 2 = 350, 3 = 500, 4 = 1 KHz */
+#define S_MEM_RTTY_TWNPK	0x562	/* rtty twin peak filter off/on */
+
+
 static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val);
 static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val);
 
 #define IC756PROII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
 #define IC756PROII_1HZ_TS_MODES IC756PROII_ALL_RX_MODES
-#define IC756PROII_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
+#define IC756PROII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
 #define IC756PROII_AM_TX_MODES (RIG_MODE_AM)
 
 
@@ -567,7 +583,8 @@ static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val)
 	struct rig_state *rs;
 	unsigned char epbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
 	int ack_len, ep_len, val_len;
-	int ep_menu;             /* Menu in $1A $05 */
+	int ep_cmd = C_CTL_MEM;
+	int ep_sc;             /* Subcommand in $1A $05xx */
 	int icom_val = 0;
 	int retval;
 
@@ -579,36 +596,40 @@ static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val)
 
 	switch(token) {
 	case TOK_SSBBASS:
-		ep_menu = 0x01;
+		ep_sc = S_MEM_SBASS ;
 		icom_val = val.f;
 		break;
 	case TOK_MEMNAME:
-		ep_menu = 0x14;
+		ep_sc = S_MEM_NAME;
 		icom_val = val.i ? 1 : 0;
 		break;
 	case TOK_SQLCTRL:
-		ep_menu = 0x22;
+		ep_sc = S_MEM_SQL_CTL;
-		/* TODO: check range */
+		/* TODO: check range this actually doesn't decode the input type 'string' */
 		icom_val = val.i;
 		break;
 	case TOK_MYCALL:	/* max 10 ASCII char */
 		ep_len = strlen(val.cs);
 		if (ep_len > 10)
 			return -RIG_EINVAL;
-		ep_menu = 0x15;
+		ep_sc = S_MEM_MYCALL;
-		memcpy(epbuf+1, val.cs, ep_len);
+		memcpy(epbuf, val.cs, ep_len);
+		break;
+	case TOK_RTTY_FLTR:	/* RTTY filter mode 0 - 4 = 250, 300, 350, 500, 1000 */
+		if (val.i < 0 || val.i > 4) return -RIG_EINVAL;
+		ep_sc = S_MEM_RTTY_FL_PB;
+		icom_val = val.f;
 		break;
 	default:
 		return -RIG_EINVAL;
 	}
 
-	epbuf[0] = ep_menu;
+	if (ep_len == 0) {
-	if (ep_len++ == 0) {
+		to_bcd_be(epbuf, (long long)icom_val, val_len*2);
-		to_bcd_be(epbuf+1, (long long)icom_val, val_len*2);
 		ep_len += val_len;
 	}
 
-	retval = icom_transaction (rig, C_CTL_MEM, 0x05, epbuf, ep_len,
+	retval = icom_transaction (rig, ep_cmd, ep_sc, epbuf, ep_len,
 						ackbuf, &ack_len);
 	if (retval != RIG_OK)
 		return retval;
@@ -629,14 +650,86 @@ static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val)
 {
 	struct icom_priv_data *priv;
 	struct rig_state *rs;
+	const struct confparams *cfp;
+	
+	unsigned char resbuf[MAXFRAMELEN];
+	int res_len, icom_val;
+	int cmdhead;
+	int retval;
+	
+	int ep_cmd = C_CTL_MEM;
+	int ep_sc;             /* Subcommand in $1A $05xx */
 
 	rs = &rig->state;
 	priv = (struct icom_priv_data*)rs->priv;
 
 	switch(token) {
+	case TOK_SSBBASS:
+		ep_sc = S_MEM_SBASS ;
+		break;
+	case TOK_MEMNAME:
+		ep_sc = S_MEM_NAME;
+		break;
+	case TOK_SQLCTRL:
+		ep_sc = S_MEM_SQL_CTL;
+		break;
+	case TOK_MYCALL:	/* max 10 ASCII char */
+		ep_sc = S_MEM_MYCALL;
+		break;
+	case TOK_RTTY_FLTR:	/* RTTY filter mode 0 - 4 */
+		ep_sc = S_MEM_RTTY_FL_PB;
+		break;
 	default:
-		return -RIG_ENIMPL;
+		rig_debug(RIG_DEBUG_ERR,"Unsupported get_ext_parm %d", token);
+		return -RIG_EINVAL;
 	}
+	
+	retval = icom_transaction (rig, ep_cmd, ep_sc, NULL, 0,
+					resbuf, &res_len);
+	if (retval != RIG_OK)
+		return retval;
+
+	/*
+	 * strbuf should contain Cn,Sc,Data area
+	 */
+	cmdhead = (ep_sc == -1) ? 1:S_MEM_SC_LEN + 1;
+	res_len -= cmdhead;
+/* should echo cmd, subcmd and then data, if you get an ack something is wrong */
+	if (resbuf[0] != ep_cmd) {
+		if (resbuf[0] == ACK) {
+				rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
+			"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+		return -RIG_EPROTO;
+		}
+		else {
+			rig_debug(RIG_DEBUG_ERR,"%s: ack NG (%#.2x), "
+				"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+		return -RIG_ERJCTED;
+		}
+	}
+	cfp = rig_ext_lookup_tok(rig, token);
+	switch(cfp->type) {
+		case RIG_CONF_STRING:
+		 memcpy(val->s, resbuf, res_len);
+		break;
+		case RIG_CONF_COMBO:
+		 val->i = from_bcd_be(resbuf+cmdhead, res_len*2);
+		break;
+		case RIG_CONF_NUMERIC:
+		 val->f = from_bcd_be(resbuf+cmdhead, res_len*2);
+		break;
+		default:
+		 rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
+			"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+		return -RIG_EPROTO;
+		
+	/* The examples of code usage for RIG_CONF_NUMERIC types seems to be restricted to raw floating
+	 point values.  Although the Val definitions allow both integer and  floating point types  The combo
+	 types appear to be left in undecoded form*/
+	}
+	rig_debug(RIG_DEBUG_TRACE,"%s: %d %d %d %f\n",
+			__FUNCTION__, res_len, icom_val, val->i, val->f);
+	
 	return RIG_OK;
 }
 
@@ -657,7 +750,7 @@ static const struct icom_priv_caps ic756pro3_priv_caps = {
 
 #define IC756PROIII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
 #define IC756PROIII_1HZ_TS_MODES IC756PROIII_ALL_RX_MODES
-#define IC756PROIII_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
+#define IC756PROIII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
 #define IC756PROIII_AM_TX_MODES (RIG_MODE_AM)
 
 

icom/icom.c

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - main file
  *  Copyright (c) 2000-2005 by Stephane Fillod
  *
- *	$Id: icom.c,v 1.96 2006-07-18 22:51:42 n0nb Exp $
+ *	$Id: icom.c,v 1.97 2006-09-22 19:55:58 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -178,12 +178,14 @@ const struct ts_sc_list ic910_ts_sc_list[] = {
         { 0, 0 },
 };
 
-const struct rtty_fltr_list rtty_fil[] = {
+/* rtty filter list for some DSP rigs ie PRO */ 
-	{ Hz(250), 0x00 },
+const pbwidth_t rtty_fil[] = {
-	{ Hz(300), 0x01 },
+	Hz(250),
-	{ Hz(350), 0x02 },
+	Hz(300),
-	{ Hz(500), 0x03 },
+	Hz(350),
-	{ kHz(1), 0x04 },
+	Hz(500),
+	kHz(1),
+	0, 
 };
 
 struct icom_addr {
@@ -448,6 +450,45 @@ int icom_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit)
 }
 
 
+/* icom_get_dsp_flt 
+	returns the dsp filter width in hz or 0 if the command is not implemented or error.  This allows the default parameters to be assigned from the get_mode routine if the command is not implemented.
+	Assumes rig != null and the current mode is in mode.
+	
+	Has been tested for IC-746pro,  Should work on the all dsp rigs ie pro models. 
+	The 746 documentation says it has the get_if_filter, but doesn't give any decoding information ? Please test.
+*/
+	
+pbwidth_t icom_get_dsp_flt(RIG *rig, rmode_t mode) {
+
+	int retval, res_len, rfstatus;
+	unsigned char resbuf[MAXFRAMELEN];
+	value_t rfwidth;
+
+	if (rig_has_get_func(rig, RIG_FUNC_RF) && (mode & (RIG_MODE_RTTY | RIG_MODE_RTTYR))) {
+		if(!rig_get_func(rig, RIG_VFO_CURR, RIG_FUNC_RF, &rfstatus) && (rfstatus)) {
+		retval = rig_get_ext_parm (rig, TOK_RTTY_FLTR, &rfwidth);
+		if (retval != RIG_OK) return 0;	/* use default */
+		else  return rtty_fil[rfwidth.i];
+		}
+	}
+	retval = icom_transaction (rig, C_CTL_MEM, S_MEM_FILT_WDTH, 0, 0,
+			resbuf, &res_len);
+	if (retval != RIG_OK) {
+		rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
+		"len=%d\n", __FUNCTION__,resbuf[0],res_len);
+			return 0;	/* use default */
+	}
+	if (res_len == 3 && resbuf[0] == C_CTL_MEM) {
+		int i;
+		i = (int) from_bcd(resbuf + 2, 2);
+
+		if (mode & RIG_MODE_AM)  return (i  + 1)* 200; /* Ic_7800 */
+		else if ( mode & (RIG_MODE_CW | RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_RTTY | 	RIG_MODE_RTTYR)) return i < 10 ? ++i * 50 : (i -4) * 100;
+	}
+	return 0;
+}
+
+
 /*
  * icom_set_mode
  * Assumes rig!=NULL, rig->state.priv!=NULL
@@ -473,7 +514,7 @@ int icom_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
 		icmode_ext = -1;
 
 	retval = icom_transaction (rig, C_SET_MODE, icmode, &icmode_ext,
-				icmode_ext == -1 ? 0 : 1, ackbuf, &ack_len);
+				(icmode_ext == -1 ? 0 : 1), ackbuf, &ack_len);
 	if (retval != RIG_OK)
 		return retval;
 
@@ -521,6 +562,10 @@ int icom_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
 
 	icom2rig_mode(rig, modebuf[1], mode_len==2 ? modebuf[2] : -1, mode, width);
 
+	/* Most rigs return 1-wide, 2-normal,3-narrow  For DSP rigs these are presets, can be programmed for 30 - 41 bandwidths, depending on mode    Lets check for dsp filters */
+	
+	if (retval = icom_get_dsp_flt(rig, *mode)) *width = retval;
+
 	return RIG_OK;
 }
 

icom/icom.h

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - main header
  *  Copyright (c) 2000-2004 by Stephane Fillod
  *
- *	$Id: icom.h,v 1.71 2006-07-18 22:51:42 n0nb Exp $
+ *	$Id: icom.h,v 1.72 2006-09-22 19:55:59 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -37,10 +37,12 @@
  * defines used by comp_cal_str in rig.c
  * STR_CAL_LENGTH is the lenght of the S Meter calibration table
  * STR_CAL_S0 is the value in dB of the lowest value (not even in table)
+ * MULTIB_SUBCMD allows the dsp rigs ie pro models to use multibyte subcommands for all the extra
+ * parameters and levels.
  */
 #define STR_CAL_LENGTH 16
 #define STR_CAL_S0 -54
-
+#define MULTIB_SUBCMD
 
 /*
  * minimal channel caps.
@@ -79,14 +81,6 @@ struct ts_sc_list {
 	unsigned char sc;	/* sub command */
 };
 
-/*
- * rtty filter passband width; available on pro rigs
- */
-struct rtty_fltr_list {
-	shortfreq_t bw; /* filter width */
-	unsigned char sel;
-};
-
 /**
  * \brief Pipelined tuning state data structure.
  */
@@ -127,7 +121,9 @@ extern const struct ts_sc_list ic706_ts_sc_list[];
 extern const struct ts_sc_list ic910_ts_sc_list[];
 extern const struct ts_sc_list ic718_ts_sc_list[];
 
-extern const struct rtty_fltr_list rtty_fil[];
+extern const pbwidth_t rtty_fil[];	/* rtty filter passband width; available on pro rigs */
+
+pbwidth_t icom_get_dsp_flt(RIG *rig, rmode_t mode);
 
 int icom_init(RIG *rig);
 int icom_cleanup(RIG *rig);

icom/icom_defs.h

@@ -2,7 +2,7 @@
  *  Hamlib CI-V backend - defines for the ICOM "CI-V" interface.
  *  Copyright (c) 2000-2004 by Stephane Fillod
  *
- *		$Id: icom_defs.h,v 1.18 2006-07-18 22:51:42 n0nb Exp $
+ *		$Id: icom_defs.h,v 1.19 2006-09-22 19:55:59 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -90,7 +90,7 @@
 #define C_SND_CW	0x17		/* Send CW message */
 #define C_SET_PWR	0x18		/* Set Power ON/OFF, Sc */
 #define C_RD_TRXID	0x19		/* Read transceiver ID code */
-#define C_CTL_MEM	0x1a		/* Misc memory/bank functions, Sc */
+#define C_CTL_MEM	0x1a		/* Misc memory/bank/rig control functions, Sc */
 #define C_SET_TONE	0x1b		/* Set tone frequency */
 #define C_CTL_PTT	0x1c		/* Control Transmit On/Off, Sc */
 #define C_CTL_MISC	0x7f		/* Miscellaneous control, Sc */
@@ -113,6 +113,8 @@
 #define S_CWR	0x07		/* Set to CW Reverse */
 #define S_RTTYR	0x08		/* Set to RTTY Reverse */
 #define S_AMS	0x11		/* Set to AMS */
+#define S_PSK	0x12		/* 7800 PSK USB */
+#define S_PSKR	0x13		/* 7800 PSK LSB */
 
 #define S_R7000_SSB	0x05	/* Set to SSB on R-7000 */
 #define PD_WIDE		0x01	/* Wide */
@@ -154,6 +156,7 @@
 #define S_SCAN_PRIO	0x42		/* Priority / window scan */
 #define S_SCAN_NSLCT	0xB0        /* Set as non select channel */
 #define S_SCAN_SLCT	0xB1        /* Set as select channel */
+#define S_SCAN_SL_NUM	0xB2		/* select programed mem scan 7800 only */
 #define S_SCAN_RSMOFF   0xD0        /* Set scan resume OFF */
 #define S_SCAN_RSMON    0xD3        /* Set scan resume ON */
 
@@ -228,6 +231,7 @@
 #define S_RFML	0x11		/* Read RF-meter level */
 #define S_SWR	0x12		/* Read SWR-meter level */
 #define S_ALC	0x13		/* Read ALC-meter level */
+#define S_CMP	0x14		/* Read COMP-meter level */
 
 /*
  * Function settings (C_CTL_FUNC) subcommands  Set and Read
@@ -235,7 +239,7 @@
 #define S_FUNC_PAMP	0x02		/* Preamp setting */
 #define S_FUNC_AGCOFF	0x10		/* IC-R8500 only */
 #define S_FUNC_AGCON 	0x11		/* IC-R8500 only */
-#define S_FUNC_AGC	0x12		/* AGC setting */
+#define S_FUNC_AGC	0x12		/* AGC setting presets: the dsp models allow these to be modified */
 #define S_FUNC_NBOFF	0x20		/* IC-R8500 only */
 #define S_FUNC_NBON	0x21		/* IC-R8500 only */
 #define S_FUNC_NB	0x22		/* NB setting */
@@ -255,6 +259,8 @@
 #define S_FUNC_AFC  	0x4A        /* Auto Frequency Control (AFC) setting */
 #define S_FUNC_DTCS	0x4B		/*DTCS tone code squelch setting*/
 #define S_FUNC_VSC	0x4C		/* voice squelch control useful for scanning*/
+#define S_FUNC_TW_PK	0x4F		/* RTTY Twin Peak filter 0= off 1 = on */
+#define S_FUNC_DIAL_LK	0x50		/* Dial lock */
 
 /*
  * Set Power On/Off (C_SET_PWR) subcommands
@@ -269,15 +275,16 @@
 #define S_ANT_TUN	0x01	/* Auto tuner 0=OFF, 1 = ON, 2=Start Tuning */
 
 /*
- * Misc contents (C_CTL_MEM) subcommands
+ * Misc contents (C_CTL_MEM) subcommands applies to newer rigs.
  */
 #define S_MEM_CNTNT		0x00	/* Memory content 2 bigendian */
 #define S_MEM_BAND_REG		0x01	/* band stacking register */
 #define S_MEM_FILT_WDTH		0x03	/* current passband filter width */
-#define S_MEM_PARM		0x05	/* rig parameters; extended parm # + param value */
+#define S_MEM_PARM		0x05	/* rig parameters; extended parm # + param value:  should be coded */
+					/* in the rig files because they are different for each rig */
 #define S_MEM_DATA_MODE		0x06	/* data mode */
 #define S_MEM_TX_PB		0x07	/* SSB tx passband */
-#define S_MEM_FLTR_SHAPE	0x08	/* filter shape 0=sharp 1=soft */
+#define S_MEM_FLTR_SHAPE	0x08	/* DSP filter shape 0=sharp 1=soft */
 
 					/* Icr75c */
 #define S_MEM_CNTNT_SLCT	0x01
@@ -294,27 +301,6 @@
 #define S_MEM_SATMODE       0x07    /* Satellite mode (on/off) */
 #define S_MEM_BANDSCOPE     0x08    /* Simple bandscope (on/off) */
 
-				    /*IC-746Pro Rig parameters Sc=S_MEM_PARM */
-#define S_MEM_LCD_CONT		0x01	/* LCD Contrast 0-256/0-100% */
-#define S_MEM_BKLIT		0x02	/* Backlight  0-256/0-100% */
-#define S_MEM_BEEP		0x06	/* Button confirmation */
-
-					/* values -9.999 MHz to + 9.999 Mhz */
-#define S_MEM_SPLT_OFST		0x12	/* default split offset 4 bytes little endian last byte sign*/
-
-					/* values 0.000 MHz to + 9.999 Mhz */
-#define S_MEM_HF_DUP_OFST	0x14	/* default HF band duplex offset 3 byte little endian */
-#define S_MEM_6M_DUP_OFST	0x15	/* default 50 mHz duplex offset  3 byte little endian */
-#define S_MEM_2M_DUP_OFST	0x16	/* default 144 MHz duplex offset  3 byte little endian */
-
-#define S_MEM_LANG		0x23	/* 0=English 1=Japanese */
-#define S_MEM_RTTY_FLTR_PB	0x62	/* 0=250 Hz, 1=300' 2 = 350, 3 = 500, 4 = 1 KHz */
-#define S_MEM_RTTY_TWNPEAK	0x63	/* rtty twin peak filter off/on */
-#define S_MEM_SCN_SPD		0x70	/* 0 = low; 1 = high */
-#define S_MEM_NB_LVL		0x72	/* NB level 0-255 */
-#define S_MEM_VOX_GN_LVL	0x73	
-#define S_MEM_AVOX_GN_LVL	0x74	/* anti-vox gain */
-#define S_MEM_VOX_DEL_LVL	0x75	/* vox delay 0=0 - 20=2.0 sec */
 
 /*
  * Tone control (C_SET_TONE) subcommands
@@ -359,4 +345,18 @@
 #define S_PRM_SLPTM		0x33
 #define S_PRM_TIME		0x27
 
+/*
+ * Tokens for Extra Level and Parameters common to multiple rigs.  Use token # > 99.  Defined here so they
+ * will be available in ICOM name space. They have different internal commands primarily in dsp rigs.  These
+ * tokens are used ext_lvl and ext_parm funtions in the individual rig files.
+ * Extra parameters which are rig specific should be coded in the individual rig files and token #s < 100.
+ */
+ 
+#define TOKEN_BACKEND(t) (t)
+
+#define TOK_RTTY_FLTR TOKEN_BACKEND(100)
+#define TOK_SSBBASS TOKEN_BACKEND(101)
+#define TOK_SQLCTRL TOKEN_BACKEND(102)
+
+
 #endif /* _ICOM_DEFS_H */

src/ext.c

@@ -2,7 +2,7 @@
  *  Hamlib Interface - extrq parameter interface
  *  Copyright (c) 2000-2004 by Stephane Fillod
  *
- *	$Id: ext.c,v 1.3 2004-10-02 10:32:08 fillods Exp $
+ *	$Id: ext.c,v 1.4 2006-09-22 19:55:59 n0nb Exp $
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Library General Public License as
@@ -98,6 +98,29 @@ const struct confparams * HAMLIB_API rig_ext_lookup(RIG *rig, const char *name)
 	return NULL;
 }
 
+/*
+ * lookup ext token, return pointer to confparams struct.
+ *
+ * lookup extlevels table first, then fall back to extparms.
+ *
+ * Returns NULL if nothing found
+ */
+const struct confparams * HAMLIB_API rig_ext_lookup_tok(RIG *rig, token_t token)
+{
+	const struct confparams *cfp;
+
+	if (!rig || !rig->caps)
+		return NULL;
+
+	for (cfp = rig->caps->extlevels; cfp && cfp->token; cfp++)
+		if (cfp->token == token)
+			return cfp;
+	for (cfp = rig->caps->extparms; cfp && cfp->token; cfp++)
+		if (cfp->token == token)
+			return cfp;
+	return NULL;
+}
+
 /*
  * Simple lookup returning token id assicated with name
  */