mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Make usage texts more similar

pull/1735/head
Daniele Forsi IU5HKX 2025-05-13 21:20:44 +02:00
rodzic ad824fa85e
commit 57e5dba438
10 zmienionych plików z 33 dodań i 33 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

4
tests/ampctl.c
Wyświetl plik

@ -475,7 +475,7 @@ void usage()
"Send COMMANDs to a connected amplifier.\n\n");
printf(
" -m, --model=ID select amplifier model number. See model list\n"
" -m, --model=ID select amplifier model number. See model list (-l)\n"
" -r, --amp-file=DEVICE set device of the amplifier to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -t, --send-cmd-term=CHAR set send_cmd command termination char\n"
@ -487,7 +487,7 @@ void usage()
" -i, --read-history read prior interactive session history\n"
" -I, --save-history save current interactive session history\n"
#endif
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n"

4
tests/ampctld.c
Wyświetl plik

@ -725,7 +725,7 @@ void usage()
"Daemon serving COMMANDs to a connected amplifier.\n\n");
printf(
" -m, --model=ID select amplifier model number. See model list\n"
" -m, --model=ID select amplifier model number. See model list (-l)\n"
" -r, --amp-file=DEVICE set device of the amplifier to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -t, --port=NUM set TCP listening port, default %s\n"
@ -734,7 +734,7 @@ void usage()
" -L, --show-conf list all config parameters\n"
" -l, --list list all model numbers and exit\n"
" -u, --dump-caps dump capabilities and exit\n"
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n",

4
tests/rigctl.c
Wyświetl plik

@ -932,7 +932,7 @@ void usage(void)
printf(
" -m, --model=ID select radio model number. See model list\n"
" -m, --model=ID select radio model number. See model list (-l)\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -p, --ptt-file=DEVICE set device of the PTT device to operate on\n"
" -d, --dcd-file=DEVICE set device of the DCD device to operate on\n"
@ -941,7 +941,7 @@ void usage(void)
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -c, --civaddr=ID set CI-V address, decimal (for Icom rigs only)\n"
" -t, --send-cmd-term=CHAR set send_cmd command termination char\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -C, --set-conf=PARM=VAL[,...] set config parameters\n"
" -L, --show-conf list all config parameters\n"
" -l, --list list all model numbers and exit\n"
" -u, --dump-caps dump capabilities and exit\n"

6
tests/rigctld.c
Wyświetl plik

@ -1508,7 +1508,7 @@ void usage(void)
printf(
" -m, --model=ID select radio model number. See model list\n"
" -m, --model=ID select radio model number. See model list (-l)\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -p, --ptt-file=DEVICE set device of the PTT device to operate on\n"
" -d, --dcd-file=DEVICE set device of the DCD device to operate on\n"
@ -1519,7 +1519,7 @@ void usage(void)
" -t, --port=NUM set TCP listening port, default %s\n"
" -S, --separator=CHAR set char as rigctld response separator, default is \\n\n"
" -T, --listen-addr=IPADDR set listening IP address, default ANY\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -C, --set-conf=PARM=VAL[,...] set config parameters\n"
" -L, --show-conf list all config parameters\n"
" -l, --list list all model numbers and exit\n"
" -u, --dump-caps dump capabilities and exit\n"
@ -1527,7 +1527,7 @@ void usage(void)
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -W, --twiddle_timeout=SECONDS timeout after detecting vfo manual change\n"
" -w, --twiddle_rit=SECONDS suppress VFOB getfreq so RIT can be twiddled\n"
" -x, --uplink set uplink get_freq ignore, 1=Sub, 2=Main\n"
" -x, --uplink=OPTION set uplink get_freq ignore: option 1=Sub, 2=Main\n"
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
" -A, --password=PASSWORD set password for rigctld access (NOT IMPLEMENTED)\n"
" -R, --rigctld-idle make rigctld close the rig when no clients are connected\n"

10
tests/rigctltcp.c
Wyświetl plik

@ -1523,7 +1523,7 @@ void usage(void)
printf(
" -m, --model=ID select radio model number. See model list\n"
" -m, --model=ID select radio model number. See model list (-l)\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -p, --ptt-file=DEVICE set device of the PTT device to operate on\n"
" -d, --dcd-file=DEVICE set device of the DCD device to operate on\n"
@ -1540,12 +1540,12 @@ void usage(void)
" -u, --dump-caps dump capabilities and exit\n"
" -o, --vfo do not default to VFO_CURR, require extra vfo arg\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -W, --twiddle_timeout timeout after detecting vfo manual change\n"
" -w, --twiddle_rit suppress VFOB getfreq so RIT can be twiddled\n"
" -W, --twiddle_timeout=SECONDS timeout after detecting vfo manual change\n"
" -w, --twiddle_rit=SECONDS suppress VFOB getfreq so RIT can be twiddled\n"
" -x, --uplink set uplink get_freq ignore, 1=Sub, 2=Main\n"
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
" -M, --multicast-addr=addr set multicast UDP address, default 0.0.0.0 (off), recommend 224.0.1.1\n"
" -n, --multicast-port=port set multicast UDP port, default 4531\n"
" -M, --multicast-addr=ADDR set multicast UDP address, default 0.0.0.0 (off), recommend 224.0.1.1\n"
" -n, --multicast-port=PORT set multicast UDP port, default 4531\n"
" -A, --password set password for rigctld access\n"
" -R, --rigctld-idle make rigctld close the rig when no clients are connected\n"
" -h, --help display this help and exit\n"

6
tests/rigmem.c
Wyświetl plik

@ -413,17 +413,17 @@ void usage()
printf(
" -m, --model=ID select radio model number. See model list\n"
" -m, --model=ID select radio model number. See model list (rigctl -l)\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -c, --civaddr=ID set CI-V address, decimal (for Icom rigs only)\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -p, --set-separator=SEP set character separator instead of the CSV comma\n"
" -p, --set-separator=CHAR set character separator instead of the CSV comma\n"
" -a, --all bypass mem_caps, apply to all fields of channel_t\n"
#ifdef HAVE_XML2
" -x, --xml use XML format instead of CSV\n"
#endif
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n"
);

8
tests/rigsmtr.c
Wyświetl plik

@ -414,16 +414,16 @@ void usage()
"Input S-Meter vs Azimuth.\n\n");
printf(
" -m, --model=ID select radio model number. See model list\n"
" -m, --model=ID select radio model number. See model list (rigctl -l)\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -c, --civaddr=ID set CI-V address, decimal (for Icom rigs only)\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -M, --rot-model=ID select rotator model number. See model list\n"
" -C, --set-conf=PARM=VAL[,...] set config parameters\n"
" -M, --rot-model=ID select rotator model number. See model list (rotctl -l)\n"
" -R, --rot-file=DEVICE set device of the rotator to operate on\n"
" -S, --rot-serial-speed=BAUD set serial speed of the serial port\n"
" -N, --rot-set-conf=PARM=VAL set rotator config parameters\n"
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n"
);

6
tests/rigswr.c
Wyświetl plik

@ -357,14 +357,14 @@ void usage()
printf(
" -m, --model=ID select radio model number. See model list\n"
" -m, --model=ID select radio model number. See model list (rigctl -l)\n"
" -r, --rig-file=DEVICE set device of the radio to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -c, --civaddr=ID set CI-V address, decimal (for Icom rigs only)\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -C, --set-conf=PARM=VAL[,...] set config parameters\n"
" -p, --ptt-file=DEVICE set device of the PTT device to operate on\n"
" -P, --ptt-type=TYPE set type of the PTT device to operate on\n"
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n"
);

6
tests/rotctl.c
Wyświetl plik

@ -534,12 +534,12 @@ void usage()
"Send COMMANDs to a connected antenna rotator.\n\n");
printf(
" -m, --model=ID select rotator model number. See model list\n"
" -m, --model=ID select rotator model number. See model list (-l)\n"
" -r, --rot-file=DEVICE set device of the rotator to operate on\n"
" -R, --rot-file2=DEVICE set device of the 2nd rotator controller to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -t, --send-cmd-term=CHAR set send_cmd command termination char\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -C, --set-conf=PARM=VAL[,...] set config parameters\n"
" -o, --set-azoffset=VAL set offset for azimuth\n"
" -O, --set-eloffset=VAL set offset for elevation\n"
" -L, --show-conf list all config parameters\n"
@ -549,7 +549,7 @@ void usage()
" -i, --read-history read prior interactive session history\n"
" -I, --save-history save current interactive session history\n"
#endif
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n"

10
tests/rotctld.c
Wyświetl plik

@ -768,19 +768,19 @@ void usage()
"Daemon serving COMMANDs to a connected antenna rotator.\n\n");
printf(
" -m, --model=ID select rotator model number. See model list\n"
" -m, --model=ID select rotator model number. See model list (-l)\n"
" -r, --rot-file=DEVICE set device of the rotator to operate on\n"
" -R, --rot-file2=DEVICE set device of the 2nd rotator controller to operate on\n"
" -s, --serial-speed=BAUD set serial speed of the serial port\n"
" -t, --port=NUM set TCP listening port, default %s\n"
" -T, --listen-addr=IPADDR set listening IP address, default ANY\n"
" -C, --set-conf=PARM=VAL set config parameters\n"
" -o, --set-azoffset==VAL set offset for azimuth\n"
" -O, --set-eloffset==VAL set offset for elevation\n"
" -C, --set-conf=PARM=VAL[,...] set config parameters\n"
" -o, --set-azoffset=VAL set offset for azimuth\n"
" -O, --set-eloffset=VAL set offset for elevation\n"
" -L, --show-conf list all config parameters\n"
" -l, --list list all model numbers and exit\n"
" -u, --dump-caps dump capabilities and exit\n"
" -v, --verbose set verbose mode, cumulative\n"
" -v, --verbose set verbose mode, cumulative (-v to -vvvvv)\n"
" -Z, --debug-time-stamps enable time stamps for debug messages\n"
" -h, --help display this help and exit\n"
" -V, --version output version information and exit\n\n",