diff --git a/common/serial.c b/common/serial.c
index 81d5548b1..9bc8b4424 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -5,7 +5,7 @@
  * Provides useful routines for read/write serial data for communicating
  * via serial interface .
  *
- * $Id: serial.c,v 1.10 2000-09-16 01:29:35 f4cfe Exp $  
+ * $Id: serial.c,v 1.11 2000-09-16 18:14:18 javabear Exp $  
  *
  *
  * This program is free software; you can redistribute it and/or
@@ -254,184 +254,6 @@ int serial_open(struct rig_state *rs) {
 
 
 
-/*
- * Open serial port using rig_caps data
- *
- *
- * input: ptr to rig_caps structure, with serial port
- *        populated. (eg: "/dev/ttyS1").
- * 
- * returns:
- *
- * fd - the file descriptor on success or -1 on error.
- *
- */
-
-#if 0
-int open_port2(struct rig_caps *rc) {
-
-  int fd; /* File descriptor for the port */
-  struct termios options;
-
-  /* Show calling structure */
-
-  printf("rig = %s \n", rc->rig_name);
-  printf("rig serial_rate_min = = %u \n", rc->serial_rate_min);
-  printf("rig serial_rate_max = = %u \n", rc->serial_rate_max);
-  printf("rig serial_port_name = %s \n", rc->serial_port_name); 
-  printf("rig serial_data_bits = %u \n", rc->serial_data_bits); 
-  printf("rig serial_stop_bits = %u \n", rc->serial_stop_bits); 
-  printf("rig serial_parity = %u \n", rc->serial_parity); 
-
-
-  
-  fd = open(rc->serial_port_name, O_RDWR | O_NOCTTY | O_NDELAY);
-
-  if (fd == -1) {
-    
-    /* Could not open the port. */
-    
-    printf("open_port: Unable to open %s - ",rc->serial_port_name);
-    return -1;			/* bad */
-  }
- 
-  fcntl(fd, F_SETFL, 0);	/*  */
- 
-  
-  /*
-   * Get the current options for the port...
-   */
-  
-  tcgetattr(fd, &options);
-  
-  /*
-   * Set the baud rates to requested values
-   */
-  
-
-  switch(rc->serial_rate_max) {
-  case 4800:
-    cfsetispeed(&options, B4800);
-    cfsetospeed(&options, B4800);
-    break;
-  case 9600:
-    cfsetispeed(&options, B9600);
-    cfsetospeed(&options, B9600);
-    break;
-  case 57600:
-    cfsetispeed(&options, B57600);
-    cfsetospeed(&options, B57600);
-    break;
-  default:
-    printf("serial:incorrect rate specified \n");
-    return -1;			/* die */
-  }
-
-  /*
-   * Enable the receiver and set local mode...
-   */
-  
-  options.c_cflag |= (CLOCAL | CREAD);
-
-/*
- * Set data to requested values.
- *
- */
-
-  switch(rc->serial_data_bits) {
-  case 7:
-    options.c_cflag &= ~CSIZE;
-    options.c_cflag |= CS7;
-    break;
-  case 8:
-    options.c_cflag &= ~CSIZE;
-    options.c_cflag |= CS8;
-    break;
-  default:
-    printf("serial:incorrect serial_data_bits specified \n");
-    return -1;
-    break;
-  }
-
-/*
- * Set stop bits to requested values.
- *
- */  
-
-  switch(rc->serial_stop_bits) {
-  case 1:
-    options.c_cflag &= ~CSTOPB;
-    break;
-  case 2:
-    options.c_cflag |= CSTOPB;
-    break;
-
-  default:
-    printf("serial:incorrect serial_stop_bits specified \n");
-    return -1;
-    break;
-  }
-
-/*
- * Set parity to requested values.
- *
- */  
-
-  switch(rc->serial_parity) {
-  case RIG_PARITY_NONE:
-    options.c_cflag &= ~PARENB;
-    break;
-  case RIG_PARITY_EVEN:
-    options.c_cflag |= PARENB;
-    options.c_cflag &= ~PARODD;
-    break;
-  case RIG_PARITY_ODD:
-    options.c_cflag |= PARENB;
-    options.c_cflag |= PARODD;
-    break;
-  default:
-    printf("serial:incorrect serial_parity specified \n");
-    return -1;
-    break;
-  }
-
-
-
-
-  /*
-   * Set 8N2
-   */
-
-/*    options.c_cflag &= ~PARENB; */
-/*    options.c_cflag |= CSTOPB; */
-/*    options.c_cflag &= ~CSIZE; */
-/*    options.c_cflag |= CS8; */
-
-  /*
-   * Chose raw input, no preprocessing please ..
-   */
-
-  options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
-
-  /*
-   * Chose raw output, no preprocessing please ..
-   */
-
-  options.c_oflag &= ~OPOST;
-
-  /*
-   * Set the new options for the port...
-   */
-  
-  tcsetattr(fd, TCSANOW, &options);
-  
-  return (fd);
-}
-
-#endif
-
-
-
 /*
  * Open serial port 
  *
@@ -546,40 +368,6 @@ void pause2() {
   return;
 }
 
-/*
- * Write a 5 character block to a file descriptor,
- * with a pause between each character.
- *
- * This is for Yaesu type rigs..require 5 character
- * sequence to bsent with 50-200msec between each char.
- *
- * input:
- *
- * fd - file descriptor to write to
- * data - pointer to a command sequence array
- *
- * returns:
- *
- *  0 = OK
- * -1 = NOT OK
- *
- */
-
-int write_block(int fd, unsigned char *txbuffer) {
-  int i;
-
-  for (i=0; i<5; i++) {
-
-    if(write(fd, &txbuffer[i] , 1) < 0) {
-      fputs("write() of  byte failed!\n", stderr);
-      return -1;
-    }
-    pause2();			/* 50 msec */
-  }
-  dump_hex(txbuffer,5,16);
-  
-  return 0;
-}
 
 
 /*