kopia lustrzana https://github.com/Hamlib/Hamlib
patch from Darren G0WCW
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@1141 7ae35d74-ebe9-4afe-98af-79ac388436b8Hamlib-1.1.4
Stéphane Fillod, F8CFE
rodzic
aa5d119c4c
commit
1dc8cb7955
894
pcr/pcr.c
894
pcr/pcr.c
|
|
@ -1,8 +1,8 @@
|
||||||
/*
|
/*
|
||||||
* Hamlib PCR backend - main file
|
* Hamlib PCR backend - main file
|
||||||
* Copyright (c) 2001-2002 by Stephane Fillod
|
* Copyright (c) 2001-2002 by Stephane Fillod and Darren Hatcher
|
||||||
*
|
*
|
||||||
* $Id: pcr.c,v 1.15 2002-03-26 08:05:51 fillods Exp $
|
* $Id: pcr.c,v 1.16 2002-08-26 22:33:52 fillods Exp $
|
||||||
*
|
*
|
||||||
* This library is free software; you can redistribute it and/or modify
|
* This library is free software; you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU Library General Public License as
|
* it under the terms of the GNU Library General Public License as
|
||||||
|
|
@ -40,6 +40,13 @@
|
||||||
|
|
||||||
#include "pcr.h"
|
#include "pcr.h"
|
||||||
|
|
||||||
|
/* baud rates used */
|
||||||
|
#define B_300 0
|
||||||
|
#define B_1200 1
|
||||||
|
#define B_4800 2
|
||||||
|
#define B_9600 3
|
||||||
|
#define B_19200 4
|
||||||
|
#define B_38400 5
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* modes in use by the "MD" command
|
* modes in use by the "MD" command
|
||||||
|
|
@ -186,7 +193,6 @@ int pcr_open(RIG *rig)
|
||||||
unsigned char ackbuf[16];
|
unsigned char ackbuf[16];
|
||||||
int ack_len, retval;
|
int ack_len, retval;
|
||||||
int wanted_serial_rate;
|
int wanted_serial_rate;
|
||||||
const char *rate_cmd;
|
|
||||||
|
|
||||||
rs = &rig->state;
|
rs = &rig->state;
|
||||||
priv = (struct pcr_priv_data *)rs->priv;
|
priv = (struct pcr_priv_data *)rs->priv;
|
||||||
|
|
@ -211,6 +217,8 @@ int pcr_open(RIG *rig)
|
||||||
|
|
||||||
#if 0
|
#if 0
|
||||||
if (wanted_serial_rate != 9600) {
|
if (wanted_serial_rate != 9600) {
|
||||||
|
const char *rate_cmd;
|
||||||
|
|
||||||
switch (wanted_serial_rate) {
|
switch (wanted_serial_rate) {
|
||||||
case 300: rate_cmd = "G100" EOM; break;
|
case 300: rate_cmd = "G100" EOM; break;
|
||||||
case 1200: rate_cmd = "G101" EOM; break;
|
case 1200: rate_cmd = "G101" EOM; break;
|
||||||
|
|
@ -495,6 +503,885 @@ const char *pcr_get_info(RIG *rig)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* *********************************************************************** */
|
||||||
|
/* load of new stuff added in by Darren Hatcher - G0WCW */
|
||||||
|
/* *********************************************************************** */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_level called by generic set level handler
|
||||||
|
*
|
||||||
|
* We are missing a way to set the BFO on/off here,
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val)
|
||||||
|
{
|
||||||
|
int retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_level called\npcr: values = %f %ld, level = %d\n", val.f, val.i,level);
|
||||||
|
|
||||||
|
/* split by float/int types */
|
||||||
|
if (!RIG_LEVEL_IS_FLOAT(level)){
|
||||||
|
/* ints first */
|
||||||
|
switch( level ) {
|
||||||
|
|
||||||
|
case RIG_LEVEL_ATT:
|
||||||
|
/* This is only on or off, but hamlib forces to use set level
|
||||||
|
* and pass as a float. Here we'll use 0 for off and 1 for on.
|
||||||
|
* If someone finds out how to set the ATT for the PCR in dB, let us
|
||||||
|
* know and the function can be changed to allow a true set level.
|
||||||
|
*
|
||||||
|
* Experiment shows it seems to have an effect, but unsure by how many db
|
||||||
|
*/
|
||||||
|
retval = pcr_set_Attenuator(rig, val.i);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case RIG_LEVEL_IF:
|
||||||
|
/* .... rig supports 0 to FF, with 0x80 in the middle */
|
||||||
|
retval = pcr_set_IF_shift(rig, val.i);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case RIG_LEVEL_AGC:
|
||||||
|
/* this is implemented as a level even though it is a binary function
|
||||||
|
* as far as PCR is concerned. There is no AGC on/off for a "set func",
|
||||||
|
* so done here is a set level
|
||||||
|
*/
|
||||||
|
retval = pcr_set_AGC(rig, val.i);
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
rig_debug(RIG_DEBUG_VERBOSE, "pcr: Integer rig level default not found ...\n");
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (RIG_LEVEL_IS_FLOAT(level)){
|
||||||
|
/* floats */
|
||||||
|
switch( level ) {
|
||||||
|
|
||||||
|
case RIG_LEVEL_AF:
|
||||||
|
/* "val" can be 0.0 to 1.0 float which is 0 to 255 levels
|
||||||
|
* 0.3 seems to be ok in terms of loudness
|
||||||
|
*/
|
||||||
|
retval = pcr_set_volume(rig, (val.f * 0xFF));
|
||||||
|
break;
|
||||||
|
|
||||||
|
case RIG_LEVEL_SQL:
|
||||||
|
/* "val" can be 0.0 to 1.0 float
|
||||||
|
* .... rig supports 0 to FF - look at function for
|
||||||
|
* squelch "bands"
|
||||||
|
*/
|
||||||
|
retval = pcr_set_squelch(rig, (val.f * 0xFF));
|
||||||
|
break;
|
||||||
|
|
||||||
|
case RIG_LEVEL_NR:
|
||||||
|
/* This selectss the DSP unit - this isn't a level per se,
|
||||||
|
* but in the manual it says that we have to switch it on first
|
||||||
|
* we'll assume 1 is for the UT-106, and anything else as off
|
||||||
|
*
|
||||||
|
* Later on we can set if the DSP features are on or off in set_func
|
||||||
|
*/
|
||||||
|
retval = pcr_set_DSP(rig, (int) val.f);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
rig_debug(RIG_DEBUG_VERBOSE, "pcr: Float rig level default not found ...\n");
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_get_level ....
|
||||||
|
*
|
||||||
|
* This needs a set of stored variables as the PCR doesn't return the current status of settings.
|
||||||
|
* So we'll need to store them as we go along and keep them in sync.
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_get_level called\n");
|
||||||
|
|
||||||
|
/* stuff needs putting in here ... */
|
||||||
|
|
||||||
|
return -RIG_ENIMPL;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_func
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* This is missing a way to call the set DSP noise reducer, as we don't have a func to call it
|
||||||
|
* based on the flags in rig.h -> see also missing a flag for setting the BFO.
|
||||||
|
*/
|
||||||
|
int pcr_set_func(RIG *rig, vfo_t vfo, setting_t func, int status)
|
||||||
|
{
|
||||||
|
int retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE,
|
||||||
|
"pcr: pcr_set_func called\npcr: status = %ld, func = %d\n", status ,func);
|
||||||
|
|
||||||
|
switch( func ) {
|
||||||
|
|
||||||
|
case RIG_FUNC_NR: /* sets DSP noise reduction on or off */
|
||||||
|
/* status = 00 for off or 01 for on
|
||||||
|
* Note that the user should switch the DSP unit on first
|
||||||
|
* using the set level function RIG_LEVEL_NR
|
||||||
|
*/
|
||||||
|
if (status == 1)
|
||||||
|
retval = pcr_set_DSP_state(rig, 1);
|
||||||
|
else
|
||||||
|
retval = pcr_set_DSP_state(rig, 0);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case RIG_FUNC_ANF: /* DSP auto notch filter */
|
||||||
|
if (status == 1)
|
||||||
|
retval = pcr_set_DSP_auto_notch(rig, 1);
|
||||||
|
else
|
||||||
|
retval = pcr_set_DSP_auto_notch(rig, 0);
|
||||||
|
break;
|
||||||
|
|
||||||
|
case RIG_FUNC_NB: /* noise blanker */
|
||||||
|
/* status = 00 for off or 01 for on */
|
||||||
|
if (status == 0)
|
||||||
|
retval = pcr_set_NB(rig, 0);
|
||||||
|
else
|
||||||
|
retval = pcr_set_NB(rig, 1);
|
||||||
|
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
rig_debug(RIG_DEBUG_VERBOSE, "pcr: Rig function default not found ...\n");
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_get_func
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* This will need similar variables/flags as get_level. The PCR doesn't offer much in the way of
|
||||||
|
* confirmation of current settings (according to the docs).
|
||||||
|
*/
|
||||||
|
int pcr_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status)
|
||||||
|
{
|
||||||
|
/* stub here ... */
|
||||||
|
return -RIG_ENIMPL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* --------------------------------------------------------------------------------------- */
|
||||||
|
/* The next functions are all "helper types". These are called by the base functions above */
|
||||||
|
/* --------------------------------------------------------------------------------------- */
|
||||||
|
/*
|
||||||
|
* Asks if the rig is ok = G0? response is G000 if ok or G001 if not
|
||||||
|
*
|
||||||
|
* Is only useful in fast transfer mode (when the CR/LF is stripped off all commands) ...
|
||||||
|
* but also works on standard mode.
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_check_ok(RIG *rig)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_check_ok called\n");
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, "G0?" EOM, 5, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6) {
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_check_ok: ack NG, len=%d\n",
|
||||||
|
ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not acked ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
return RIG_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Sets the volume ofthe rig to the level specified in the level integer.
|
||||||
|
*
|
||||||
|
* Format is J40xx - where xx is 00 to FF in hex, and specifies 255 volume levels
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_volume(RIG *rig, int level)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], vol_cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_volume called - %d\n",level);
|
||||||
|
|
||||||
|
// check that volume valid
|
||||||
|
if (level < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_volume: rig level too low: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (level > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_volume: rig level too high: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
sprintf(vol_cmd,"J40%0X\r\n", level);
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, vol_cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_volume: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Sets the serial rate of the rig RS232
|
||||||
|
*
|
||||||
|
* Format is G1xx - where xx is defined as:
|
||||||
|
* 00=1200, 01=2400, 02=4800, 03=9600, 04=19200, 05=38400, 06..FF=38400
|
||||||
|
*
|
||||||
|
* baud_rate: 0=1200 ... 5=38400
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_comm_rate(RIG *rig, int baud_rate)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], baud_cmd[8];
|
||||||
|
struct pcr_priv_data *priv;
|
||||||
|
|
||||||
|
int ack_len, retval;
|
||||||
|
struct rig_state *rs;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_VERBOSE, "pcr: pcr_set_comm_rate called\n");
|
||||||
|
|
||||||
|
// check that rate valid
|
||||||
|
if (baud_rate < 0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_comm_rate: rig rate too low: %d\n", baud_rate);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (baud_rate > B_38400)
|
||||||
|
baud_rate = B_38400; //enforce to 38400
|
||||||
|
|
||||||
|
// it must be valid ...
|
||||||
|
|
||||||
|
sprintf(baud_cmd,"G10%0d" EOM, baud_rate);
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, baud_cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
rs = &rig->state;
|
||||||
|
priv = (struct pcr_priv_data *)rs->priv;
|
||||||
|
|
||||||
|
// Note: the rate will be ok if we get to here ...
|
||||||
|
switch ( baud_rate ) {
|
||||||
|
|
||||||
|
case B_300:
|
||||||
|
rs->rigport.parm.serial.rate = 300; // work ok!
|
||||||
|
break;
|
||||||
|
case B_1200:
|
||||||
|
rs->rigport.parm.serial.rate = 1200; //work ok!
|
||||||
|
break;
|
||||||
|
case B_4800:
|
||||||
|
rs->rigport.parm.serial.rate = 4800; // work ok!
|
||||||
|
break;
|
||||||
|
case B_9600:
|
||||||
|
rs->rigport.parm.serial.rate = 9600; // work ok!
|
||||||
|
break;
|
||||||
|
case B_19200:
|
||||||
|
rs->rigport.parm.serial.rate = 19200; // work ok!
|
||||||
|
break;
|
||||||
|
case B_38400:
|
||||||
|
rs->rigport.parm.serial.rate = 38400; // work ok!
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
rs->rigport.parm.serial.rate = 38400;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// re-setup the port
|
||||||
|
serial_setup(&rs->rigport);
|
||||||
|
|
||||||
|
// The return value is at the new speed. However the old message may be garbled ...
|
||||||
|
// so to sync ok, we need to just do an ack
|
||||||
|
retval = pcr_check_ok(rig);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval; // hmmm ... busted
|
||||||
|
|
||||||
|
// ok .. good stuff
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_squelch
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Format is J41xx - where xx is 00 to FF in hex, and specifies 255 squelch levels
|
||||||
|
*
|
||||||
|
* Sets the squelch of the rig to the level specified in the level integer.
|
||||||
|
* There are some bands though ...
|
||||||
|
* 00 Tone squelch clear and squelch open
|
||||||
|
* 01-3f Squelch open
|
||||||
|
* 40-7f Noise squelch
|
||||||
|
* 80-ff Noise squelch + S meter squelch ...
|
||||||
|
* Comparative S level = (squelch setting - 128) X 2
|
||||||
|
*
|
||||||
|
* Could do with some constatnts to add together to allow better (and more accurate)
|
||||||
|
* use of Hamlib API. Otherwise may get unexpected squelch settings if have to do by hand.
|
||||||
|
*
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_squelch(RIG *rig, int level)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_squelch called - %d\n",level);
|
||||||
|
|
||||||
|
// check that level valid
|
||||||
|
if (level < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_squelch: rig level too low: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (level > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_squelch: rig level too high: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
|
||||||
|
sprintf(cmd,"J41%0X\r\n", level);
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_squelch: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_IF_shift
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the IF shift of the rig to the level specified in the level integer.
|
||||||
|
* IF-SHIFT position (in 256 stages, 80 = centre):
|
||||||
|
*
|
||||||
|
* < 80 Minus shift (in 10 Hz steps)
|
||||||
|
* > 80 Plus shift (in 10 Hz steps)
|
||||||
|
* 80 Centre
|
||||||
|
*
|
||||||
|
* Format is J43xx - where xx is 00 to FF in hex, and specifies 255 squelch levels
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int pcr_set_IF_shift(RIG *rig, int shift)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_IF_shift called - %d\n",shift);
|
||||||
|
|
||||||
|
// check that level valid
|
||||||
|
if (shift < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_IF_shift: rig shift too low: %d\n", shift);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (shift > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_IF_shift: rig shift too high: %d\n", shift);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
|
||||||
|
sprintf(cmd,"J43%0X\r\n", shift);
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_IF_shift: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* pcr_set_AGC
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the AGC on or off based on the level specified in the level integer.
|
||||||
|
* 00 = off, 01 (non zero) is on
|
||||||
|
*
|
||||||
|
* Format is J45xx - where xx is 00 to FF in hex
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int pcr_set_AGC(RIG *rig, int level)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_AGC called - %d\n",level);
|
||||||
|
|
||||||
|
// check that level valid
|
||||||
|
if (level < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_AGC: AGC too low: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (level > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_AGC: rig AGC too high: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (level == 0)
|
||||||
|
sprintf(cmd,"J4500\r\n"); /* off */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J4501\r\n"); /* else must be on */
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_AGC: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* pcr_set_NB(RIG *rig, int level);
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the noise blanker on or off based on the level specified in the level integer.
|
||||||
|
* 00 = off, 01 (non zero) is on
|
||||||
|
*
|
||||||
|
* Format is J46xx - where xx is 00 to FF in hex
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int pcr_set_NB(RIG *rig, int level)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_NB called - %d\n",level);
|
||||||
|
|
||||||
|
// check that level valid
|
||||||
|
if (level < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_NB: NB too low: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (level > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_NB: rig NB too high: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (level == 0)
|
||||||
|
sprintf(cmd,"J4600\r\n"); /* off */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J4601\r\n"); /* else must be on */
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_NB: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_NB(RIG *rig, int level);
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the attenuator on or off based on the level specified in the level integer.
|
||||||
|
* 00 = off, 01 (non zero) is on
|
||||||
|
* the downer is I don't know where to set the attenatuor level ....!
|
||||||
|
*
|
||||||
|
* Format is J47xx - where xx is 00 to FF in hex
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int pcr_set_Attenuator(RIG *rig, int level)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_Att called - Atten level = %d\n",level);
|
||||||
|
|
||||||
|
// check that level valid
|
||||||
|
if (level < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_Att: too low: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (level > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_Att: rig too high: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (level == 0)
|
||||||
|
sprintf(cmd,"J4700\r\n"); /* off */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J4701\r\n"); /* else must be on */
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_Att: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_VERBOSE,"pcr_set_Att: all ok\n");
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_BFO
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the BFO of the rig to the level specified in the level integer.
|
||||||
|
* BFO-SHIFT position (in 256 stages, 80 = centre):
|
||||||
|
*
|
||||||
|
* < 80 Minus shift (in 10 Hz steps)
|
||||||
|
* > 80 Plus shift (in 10 Hz steps)
|
||||||
|
* 80 Centre
|
||||||
|
*
|
||||||
|
* Format is J43xx - where xx is 00 to FF in hex, and specifies 255 squelch levels
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int pcr_set_BFO(RIG *rig, int shift) // J4Axx
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_BFO_shift called - %d\n",shift);
|
||||||
|
|
||||||
|
// check that level valid
|
||||||
|
if (shift < 0x0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_BFO_shift: rig shift too low: %d\n", shift);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (shift > 0xff)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_BFO_shift: rig shift too high: %d\n", shift);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
|
||||||
|
sprintf(cmd,"J4A%0X\r\n", shift);
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_BFO_shift: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_DSP(RIG *rig, int level);
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the DSP to UT106 (01) or off (non 01)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
int pcr_set_DSP(RIG *rig, int level)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_DSP called - level = %d\n",level);
|
||||||
|
|
||||||
|
/* check that level valid - zero or one only */
|
||||||
|
if (level < 0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_DSP: too low: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (level > 1)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_DSP: rig too high: %d\n", level);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (level == 1)
|
||||||
|
sprintf(cmd,"J8001\r\n"); /* else must be UT106 */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J8000\r\n"); /* off */
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_DSP: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_DSP_state(RIG *rig, int state);
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the DSP on or off (1 = on, 0 = off)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_DSP_state(RIG *rig, int state)
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_DSP_state called - state = %d\n",state);
|
||||||
|
|
||||||
|
/* check that state valid - zero or one only */
|
||||||
|
if (state < 0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_DSP: too low: %d\n", state);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (state > 1)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_DSP: rig too high: %d\n", state);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (state == 1)
|
||||||
|
sprintf(cmd,"J8101\r\n"); /* else must be set on */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J8100\r\n"); /* off */
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_DSP_state: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_DSPnoise_reducer(RIG *rig, int state);
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the DSP noise reducer on or off (0x01 = on, 0x00 = off)
|
||||||
|
* the level of NR set by values 0x01 to 0x10 (1 to 16 inclusive)
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_DSP_noise_reducer(RIG *rig, int state) // J82xx
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_DSP_state called - state = %d\n",state);
|
||||||
|
|
||||||
|
/* check that state valid - zero or one only */
|
||||||
|
if (state < 0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_DSP_noise_reducer: too low: %d\n", state);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (state > 0x10)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_DSP_noise_reducer: rig too high: %d\n", state);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (state == 0)
|
||||||
|
sprintf(cmd,"J8200\r\n"); /* off */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J82%0X\r\n",state); /* else must be set on */
|
||||||
|
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_DSP_noise_reducer: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* pcr_set_DSP_auto_notch(RIG *rig, int state);
|
||||||
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
||||||
|
*
|
||||||
|
* Sets the auto notch on or off (1 = on, 0 = off)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pcr_set_DSP_auto_notch(RIG *rig, int state) // J83xx
|
||||||
|
{
|
||||||
|
unsigned char ackbuf[16], cmd[12];
|
||||||
|
int ack_len, retval;
|
||||||
|
|
||||||
|
rig_debug(RIG_DEBUG_TRACE, "pcr: pcr_set_DSP_auto_notch called - state = %d\n",state);
|
||||||
|
|
||||||
|
/* check that state valid - zero or one only */
|
||||||
|
if (state < 0)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR,
|
||||||
|
"pcr_set_DSP_auto_notch: too low: %d\n", state);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
if (state > 1)
|
||||||
|
{
|
||||||
|
rig_debug(RIG_DEBUG_ERR, "pcr_set_DSP_auto_notch: rig too high: %d\n", state);
|
||||||
|
return -RIG_EINVAL;
|
||||||
|
}
|
||||||
|
// it must be valid ...
|
||||||
|
if (state == 0)
|
||||||
|
sprintf(cmd,"J8300\r\n"); /* off */
|
||||||
|
else
|
||||||
|
sprintf(cmd,"J8301\r\n"); /* else must be set on */
|
||||||
|
|
||||||
|
|
||||||
|
ack_len = 6;
|
||||||
|
retval = pcr_transaction (rig, cmd, 7, ackbuf, &ack_len);
|
||||||
|
if (retval != RIG_OK)
|
||||||
|
return retval;
|
||||||
|
|
||||||
|
if (ack_len != 6 ){
|
||||||
|
rig_debug(RIG_DEBUG_ERR,"pcr_set_DSP_auto_notch: ack NG, len=%d\n", ack_len);
|
||||||
|
return -RIG_ERJCTED;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (strcmp("G000" EOM, ackbuf) != 0) // then did not ack ok
|
||||||
|
return -RIG_EPROTO;
|
||||||
|
|
||||||
|
return RIG_OK;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
int pcr_set_VSC(RIG *rig, int level) // J50xx
|
||||||
|
{
|
||||||
|
/* Not sure what VSC for so skipping the function here ... */
|
||||||
|
return -RIG_ENIMPL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* *********************************************************************************************
|
||||||
|
* int pcr_set_comm_mode(RIG *rig, int mode_type); // Set radio to fast/diagnostic mode G3xx
|
||||||
|
* int pcr_soft_reset(RIG *rig); // Ask rig to reset itself H0xx
|
||||||
|
********************************************************************************************* */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* initrigs_pcr is called by rig_backend_load
|
* initrigs_pcr is called by rig_backend_load
|
||||||
*/
|
*/
|
||||||
|
|
@ -508,4 +1395,3 @@ int initrigs_pcr(void *be_handle)
|
||||||
return RIG_OK;
|
return RIG_OK;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
32
pcr/pcr.h
32
pcr/pcr.h
|
|
@ -2,7 +2,7 @@
|
||||||
* Hamlib PCR backend - main header
|
* Hamlib PCR backend - main header
|
||||||
* Copyright (c) 2001,2002 by Stephane Fillod
|
* Copyright (c) 2001,2002 by Stephane Fillod
|
||||||
*
|
*
|
||||||
* $Id: pcr.h,v 1.7 2002-03-07 22:48:50 fillods Exp $
|
* $Id: pcr.h,v 1.8 2002-08-26 22:33:52 fillods Exp $
|
||||||
*
|
*
|
||||||
* This library is free software; you can redistribute it and/or modify
|
* This library is free software; you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU Library General Public License as
|
* it under the terms of the GNU Library General Public License as
|
||||||
|
|
@ -43,6 +43,36 @@ int pcr_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width);
|
||||||
const char *pcr_get_info(RIG *rig);
|
const char *pcr_get_info(RIG *rig);
|
||||||
|
|
||||||
|
|
||||||
|
/*Added - G0WCW ----------------------------------------------------- */
|
||||||
|
|
||||||
|
int pcr_set_level(RIG *rig, vfo_t vfo, setting_t level, value_t val);
|
||||||
|
int pcr_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
|
||||||
|
|
||||||
|
int pcr_get_func(RIG *rig, vfo_t vfo, setting_t func, int *status);
|
||||||
|
int pcr_set_func(RIG *rig, vfo_t vfo, setting_t func, int status);
|
||||||
|
|
||||||
|
int pcr_set_comm_rate(RIG *rig, int baud_rate);
|
||||||
|
int pcr_check_ok(RIG *rig);
|
||||||
|
|
||||||
|
int pcr_set_volume(RIG *rig, int level);
|
||||||
|
int pcr_set_squelch(RIG *rig, int level);
|
||||||
|
int pcr_set_IF_shift(RIG *rig, int shift);
|
||||||
|
int pcr_set_AGC(RIG *rig, int level); // J45xx
|
||||||
|
int pcr_set_NB(RIG *rig, int level); // J46xx
|
||||||
|
int pcr_set_Attenuator(RIG *rig, int level); // J47xx
|
||||||
|
|
||||||
|
int pcr_set_BFO(RIG *rig, int shift); // J4Axx
|
||||||
|
int pcr_set_VSC(RIG *rig, int level); // J50xx
|
||||||
|
int pcr_set_DSP(RIG *rig, int state); // J80xx
|
||||||
|
int pcr_set_DSP_state(RIG *rig, int state); // J8100=off J8101=on
|
||||||
|
int pcr_set_DSP_noise_reducer(RIG *rig, int state); // J82xx
|
||||||
|
int pcr_set_DSP_auto_notch(RIG *rig, int state); // J83xx
|
||||||
|
/* ------------------------------------------------------------------ */
|
||||||
|
|
||||||
|
// int pcr_get_param(RIG *rig, setting_t parm, value_t *val);
|
||||||
|
// int pcr_set_param(RIG *rig, setting_t parm, value_t *val);
|
||||||
|
|
||||||
|
|
||||||
extern const struct rig_caps pcr1000_caps;
|
extern const struct rig_caps pcr1000_caps;
|
||||||
extern const struct rig_caps pcr100_caps;
|
extern const struct rig_caps pcr100_caps;
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,8 +1,8 @@
|
||||||
/*
|
/*
|
||||||
* Hamlib PCR backend - PCR-1000 description
|
* Hamlib PCR backend - PCR-1000 description
|
||||||
* Copyright (c) 2001-2002 by Stephane Fillod
|
* Copyright (c) 2001-2002 by Stephane Fillod and Darren Hatcher
|
||||||
*
|
*
|
||||||
* $Id: pcr1000.c,v 1.7 2002-08-16 17:43:02 fillods Exp $
|
* $Id: pcr1000.c,v 1.8 2002-08-26 22:33:52 fillods Exp $
|
||||||
*
|
*
|
||||||
* This library is free software; you can redistribute it and/or modify
|
* This library is free software; you can redistribute it and/or modify
|
||||||
* it under the terms of the GNU Library General Public License as
|
* it under the terms of the GNU Library General Public License as
|
||||||
|
|
@ -29,11 +29,15 @@
|
||||||
#include "pcr.h"
|
#include "pcr.h"
|
||||||
|
|
||||||
|
|
||||||
|
/* used in pcr_set_mode */
|
||||||
#define PCR1000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
|
#define PCR1000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
|
||||||
|
|
||||||
#define PCR1000_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_ANF|RIG_FUNC_NR)
|
/* used in pcr_set_func */
|
||||||
|
#define PCR1000_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_NR)
|
||||||
|
|
||||||
#define PCR1000_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_SQLSTAT|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)
|
/* used in pcr_set_level */
|
||||||
|
#define PCR1000_LEVEL (RIG_LEVEL_ATT | RIG_LEVEL_AF | RIG_LEVEL_SQL | RIG_LEVEL_IF | \
|
||||||
|
RIG_LEVEL_AGC | RIG_LEVEL_NR)
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* IC PCR1000 rigs capabilities.
|
* IC PCR1000 rigs capabilities.
|
||||||
|
|
@ -60,7 +64,7 @@ const struct rig_caps pcr1000_caps = {
|
||||||
.timeout = 1000,
|
.timeout = 1000,
|
||||||
.retry = 3,
|
.retry = 3,
|
||||||
|
|
||||||
.has_get_func = RIG_FUNC_NONE,
|
.has_get_func = PCR1000_FUNC,
|
||||||
.has_set_func = PCR1000_FUNC,
|
.has_set_func = PCR1000_FUNC,
|
||||||
.has_get_level = PCR1000_LEVEL,
|
.has_get_level = PCR1000_LEVEL,
|
||||||
.has_set_level = RIG_LEVEL_SET(PCR1000_LEVEL),
|
.has_set_level = RIG_LEVEL_SET(PCR1000_LEVEL),
|
||||||
|
|
@ -118,20 +122,19 @@ const struct rig_caps pcr1000_caps = {
|
||||||
|
|
||||||
.get_info = pcr_get_info,
|
.get_info = pcr_get_info,
|
||||||
|
|
||||||
|
.set_level = pcr_set_level,
|
||||||
|
.get_level = pcr_get_level,
|
||||||
|
.set_func = pcr_set_func,
|
||||||
|
.get_func = pcr_get_func,
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* TODO:
|
* TODO:
|
||||||
* set_trn, set_powerstat,
|
* set_trn, set_powerstat,
|
||||||
* set_level AF,SQL,IF,AF,ATT
|
* set_level ATT?
|
||||||
* set_func: AGC,NB,TSQL, VSC?
|
* set_func: NB,TSQL, VSC?
|
||||||
* get_level, get_dcd, dtmf, ..
|
* get_level, get_dcd, dtmf, ..
|
||||||
* decode_event, set_ctcss, set_ctcss_sql
|
* decode_event, set_ctcss, set_ctcss_sql
|
||||||
* and also all the associated get_ functions.
|
* and also all the associated get_ functions.
|
||||||
*/
|
*/
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Function definitions below
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
|
|
|
||||||
Ładowanie…
Reference in New Issue