mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

FT-817 status queries honour retries and timeout 

This is  to help  with owners  of Arduino boards  like the  ubitx that
emulate an  FT-817 but respond badly  to a DTR signal  glitch which is
inevitable when opening a Linux  serial port.  The glitch triggers the
Arduino  boot-loader which  must be  allowed  to time  out before  the
FT-817 emulation starts.
pull/2/head
Bill Somerville 2018-03-11 19:43:01 +00:00
rodzic 7806e467fb
commit 09e6ab6ef1
2 zmienionych plików z 11 dodań i 15 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

17
yaesu/ft817.c
Wyświetl plik

@ -177,7 +177,7 @@ const struct rig_caps ft817_caps = {
.write_delay = FT817_WRITE_DELAY,
.post_write_delay = FT817_POST_WRITE_DELAY,
.timeout = FT817_TIMEOUT,
.retry = 0,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_LOCK | RIG_FUNC_TONE | RIG_FUNC_TSQL,
.has_get_level = RIG_LEVEL_STRENGTH | RIG_LEVEL_RAWSTR | RIG_LEVEL_RFPOWER,
@ -402,6 +402,7 @@ static int ft817_get_status(RIG *rig, int status)
unsigned char *data;
int len;
int n;
int retries = rig->state.rigport.retry;
switch (status) {
case FT817_NATIVE_CAT_GET_FREQ_MODE_STATUS:
@ -424,13 +425,16 @@ static int ft817_get_status(RIG *rig, int status)
return -RIG_EINTERNAL;
}
serial_flush(&rig->state.rigport);
do
{
serial_flush(&rig->state.rigport);
write_block(&rig->state.rigport, (char *) p->pcs[status].nseq, YAESU_CMD_LENGTH);
n = read_block(&rig->state.rigport, (char *) data, len);
}
while (retries-- && n < 0);
write_block(&rig->state.rigport, (char *) p->pcs[status].nseq, YAESU_CMD_LENGTH);
if ((n = read_block(&rig->state.rigport, (char *) data, len)) < 0)
if (n < 0)
return n;
if (n != len)
return -RIG_EIO;
@ -1153,4 +1157,3 @@ int ft817_mW2power (RIG *rig, float *power, unsigned int mwpower,
/* ---------------------------------------------------------------------- */

9
yaesu/ft817.h
Wyświetl plik

@ -50,7 +50,7 @@
/*
* Read timeout.
*/
#define FT817_TIMEOUT 200
#define FT817_TIMEOUT 1000
/*
* The time the TX, RX and FREQ/MODE status are cached (in millisec).
@ -161,10 +161,3 @@ static int ft817_mW2power (RIG *rig, float *power, unsigned int mwpower,
freq_t freq, rmode_t mode);
#endif /* _FT817_H */