Hamlib/icom/ic78.c

/*
 *  Hamlib CI-V backend - description of IC-78
 *  Copyright (c) 2004 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "icom.h"
#include "bandplan.h"
#include "idx_builtin.h"

#define IC78_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)

#define IC78_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC78_AM_TX_MODES (RIG_MODE_AM)

#define IC78_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP)

#define IC78_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_RAWSTR|RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_SQL)

#define IC78_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)

#define IC78_VFO_OPS (RIG_OP_NONE)
#define IC78_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM)

#define IC78_ANTS (RIG_ANT_1)

/*
 * IC78_STR_CAL is what the S-meter displays
 *
 * FIXME: real measures!
 */
#define IC78_STR_CAL { 2, \
	{ \
		{  0, -60 }, \
		{ 255, 60 } \
	} }

/*
 * ic78 rigs capabilities.
 */
static const struct icom_priv_caps ic78_priv_caps = {
		0x62,	/* default address */
		0,		/* 731 mode */
		ic706_ts_sc_list
};

const struct rig_caps ic78_caps = {
.rig_model =  RIG_MODEL_IC78,
.model_name = "IC-78",
.mfg_name =  "Icom",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,
.has_get_func =  IC78_FUNC_ALL,
.has_set_func =  IC78_FUNC_ALL,
.has_get_level =  IC78_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(IC78_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,	/* FIXME: parms */
.level_gran = {
	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
	},
.parm_gran =  {},
.preamp =   { 10, 20, RIG_DBLST_END, },
.attenuator =   { 20, RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  IC78_VFO_OPS,
.scan_ops =  IC78_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
		   {   1,  99, RIG_MTYPE_MEM },
		   { 100, 100, RIG_MTYPE_CALL },
		   RIG_CHAN_END,
	},

.rx_range_list1 =   {
	{kHz(30),MHz(30)-1,IC78_ALL_RX_MODES,-1,-1,IC78_VFO_ALL,IC78_ANTS},
	RIG_FRNG_END, },
.tx_range_list1 =  {
	FRQ_RNG_HF(1,IC78_OTHER_TX_MODES, W(2),W(100),IC78_VFO_ALL,IC78_ANTS),
	FRQ_RNG_HF(1,IC78_AM_TX_MODES, W(2),W(40),IC78_VFO_ALL,IC78_ANTS),   /* AM class */
	RIG_FRNG_END,
},

.rx_range_list2 =   {
	{kHz(30),MHz(30)-1,IC78_ALL_RX_MODES,-1,-1,IC78_VFO_ALL,IC78_ANTS},
	RIG_FRNG_END, },
.tx_range_list2 =  {
	FRQ_RNG_HF(2,IC78_OTHER_TX_MODES, W(2),W(100),IC78_VFO_ALL,IC78_ANTS),
	FRQ_RNG_HF(2,IC78_AM_TX_MODES, W(2),W(40),IC78_VFO_ALL,IC78_ANTS),   /* AM class */
	RIG_FRNG_END,
},


.tuning_steps = 	{
	 {IC78_ALL_RX_MODES,10},
	 {IC78_ALL_RX_MODES,100},
	 {IC78_ALL_RX_MODES,kHz(1)},
	 {IC78_ALL_RX_MODES,kHz(5)},
	 {IC78_ALL_RX_MODES,kHz(9)},
	 {IC78_ALL_RX_MODES,kHz(10)},
	 {IC78_ALL_RX_MODES,12500},
	 {IC78_ALL_RX_MODES,kHz(20)},
	 {IC78_ALL_RX_MODES,kHz(25)},
	 {IC78_ALL_RX_MODES,kHz(100)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
.filters = 	{
		{RIG_MODE_AM, kHz(6)},
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_AM, kHz(2.4)},
		RIG_FLT_END,
	},
.str_cal = IC78_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&ic78_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_level =  icom_set_level,
.get_level =  icom_get_level,
.set_func =  icom_set_func,
.get_func =  icom_get_func,
.set_mem =  icom_set_mem,
.scan =  icom_scan,
.get_dcd =  icom_get_dcd,

};