Hamlib/extra/gnuradio/graudio.c

206 wiersze
6.0 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib GNUradio backend - graudio/any rig
* Copyright (c) 2001-2003 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "gnuradio.h"
/*
* GNU Radio, sound card based.
*
*/
#define GRAUDIO_FUNC RIG_FUNC_NONE
#define GRAUDIO_LEVEL (RIG_LEVEL_AF|RIG_LEVEL_RF)
#define GRAUDIO_PARM RIG_PARM_NONE
#define GRAUDIO_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
2019-11-30 16:19:08 +00:00
#define GRAUDIO_SCAN RIG_SCAN_NONE
/*
* GNU Radio Audio has no WFM mode because bandwidth is too wide!
*/
#define GRAUDIO_MODES (RIG_MODE_FM|RIG_MODE_AM|RIG_MODE_SSB)
#define GRAUDIO_VFO (RIG_VFO_A|RIG_VFO_B)
2019-11-30 16:19:08 +00:00
static const struct gnuradio_priv_caps graudio_priv_caps =
{
.tuner_model = RIG_MODEL_DUMMY,
.input_rate = 48000, /* To be fixed, later */
.IF_center_freq = 0 /* -kHz(10) */,
};
2019-11-30 16:19:08 +00:00
const struct rig_caps graudio_caps =
{
.rig_model = RIG_MODEL_GRAUDIO,
.model_name = "GNU Radio GrAudio",
.mfg_name = "GNU",
.version = "0.1.2",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_PCRECEIVER,
.targetable_vfo = RIG_TARGETABLE_ALL,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_NONE,
.has_get_func = GRAUDIO_FUNC,
.has_set_func = GRAUDIO_FUNC,
.has_get_level = GRAUDIO_LEVEL,
.has_set_level = RIG_LEVEL_SET(GRAUDIO_LEVEL),
.has_get_parm = GRAUDIO_PARM,
.has_set_parm = RIG_PARM_SET(GRAUDIO_PARM),
.ctcss_list = NULL,
.dcs_list = NULL,
.chan_list = {
RIG_CHAN_END,
},
.scan_ops = GRAUDIO_SCAN,
.vfo_ops = GRAUDIO_VFO_OP,
.transceive = RIG_TRN_OFF,
.attenuator = { RIG_DBLST_END, },
.preamp = { RIG_DBLST_END, },
.rx_range_list2 = { {
.start = kHz(100), .end = MHz(30), .modes = GRAUDIO_MODES,
.low_power = -1, .high_power = -1, GRAUDIO_VFO
},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = { {GRAUDIO_MODES, 1}, {GRAUDIO_MODES, RIG_TS_ANY}, RIG_TS_END, },
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW, kHz(2.4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)},
{GRAUDIO_MODES, RIG_FLT_ANY},
RIG_FLT_END,
},
.priv = (void *)& graudio_priv_caps,
.rig_init = gr_init,
.rig_cleanup = gr_cleanup,
.rig_open = graudio_open,
.rig_close = gr_close,
.cfgparams = gnuradio_cfg_params,
.set_conf = gnuradio_set_conf,
.get_conf = gnuradio_get_conf,
.set_freq = gr_set_freq,
.get_freq = gr_get_freq,
.set_vfo = gr_set_vfo,
.get_vfo = gr_get_vfo,
.set_mode = gr_set_mode,
.get_mode = gr_get_mode,
.set_level = gnuradio_set_level,
.get_level = gnuradio_get_level,
.set_rit = gnuradio_set_rit,
.get_rit = gnuradio_get_rit,
.set_ts = gnuradio_set_ts,
.get_ts = gnuradio_get_ts,
.vfo_op = gnuradio_vfo_op,
};
2019-11-30 16:19:08 +00:00
const struct rig_caps graudioiq_caps =
{
.rig_model = RIG_MODEL_GRAUDIOIQ,
.model_name = "GNU Radio GrAudio I&Q",
.mfg_name = "GNU",
.version = "0.1.2",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_PCRECEIVER,
.targetable_vfo = RIG_TARGETABLE_ALL,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_NONE,
.has_get_func = GRAUDIO_FUNC,
.has_set_func = GRAUDIO_FUNC,
.has_get_level = GRAUDIO_LEVEL,
.has_set_level = RIG_LEVEL_SET(GRAUDIO_LEVEL),
.has_get_parm = GRAUDIO_PARM,
.has_set_parm = RIG_PARM_SET(GRAUDIO_PARM),
.ctcss_list = NULL,
.dcs_list = NULL,
.chan_list = {
RIG_CHAN_END,
},
.scan_ops = GRAUDIO_SCAN,
.vfo_ops = GRAUDIO_VFO_OP,
.transceive = RIG_TRN_OFF,
.attenuator = { RIG_DBLST_END, },
.preamp = { RIG_DBLST_END, },
.rx_range_list2 = { {
.start = kHz(100), .end = MHz(30), .modes = GRAUDIO_MODES,
.low_power = -1, .high_power = -1, GRAUDIO_VFO
},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = { {GRAUDIO_MODES, 1}, {GRAUDIO_MODES, RIG_TS_ANY}, RIG_TS_END, },
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW, kHz(2.4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)},
{GRAUDIO_MODES, RIG_FLT_ANY},
RIG_FLT_END,
},
.priv = (void *)& graudio_priv_caps,
.rig_init = gr_init,
.rig_cleanup = gr_cleanup,
.rig_open = graudioiq_open,
.rig_close = gr_close,
.cfgparams = gnuradio_cfg_params,
.set_conf = gnuradio_set_conf,
.get_conf = gnuradio_get_conf,
.set_freq = gr_set_freq,
.get_freq = gr_get_freq,
.set_vfo = gr_set_vfo,
.get_vfo = gr_get_vfo,
.set_mode = gr_set_mode,
.get_mode = gr_get_mode,
.set_level = gnuradio_set_level,
.get_level = gnuradio_get_level,
.set_rit = gnuradio_set_rit,
.get_rit = gnuradio_get_rit,
.set_ts = gnuradio_set_ts,
.get_ts = gnuradio_get_ts,
.vfo_op = gnuradio_vfo_op,
};