Hamlib/tentec/argonaut.c

/*
 *  Hamlib TenTenc backend - TT-516 PC-Radio description
 *  Copyright (c) 2003-2008 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "tentec2.h"
#include "bandplan.h"


#define TT516_MODES (RIG_MODE_FM|RIG_MODE_CW|RIG_MODE_SSB)
#define TT516_RXMODES (TT516_MODES|RIG_MODE_AM)

#define TT516_FUNCS (RIG_FUNC_NONE)

#define TT516_LEVELS (RIG_LEVEL_RAWSTR|/* RIG_LEVEL_NB| */ \
				RIG_LEVEL_SQL|/*RIG_LEVEL_PBT|*/ \
				RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD| \
				RIG_LEVEL_SWR|RIG_LEVEL_ATT)

#define TT516_ANTS RIG_ANT_1

#define TT516_VFO (RIG_VFO_A|RIG_VFO_B)


/*
 * tt516 receiver capabilities.
 *
 * protocol is documented at
 *		http://www.rfsquared.com/
 *
 */
const struct rig_caps tt516_caps = {
.rig_model =  RIG_MODEL_TT516,
.model_name = "TT-516 Argonaut V",
.mfg_name =  "Ten-Tec",
.version =  "0.2",
.copyright =  "LGPL",
.status =  RIG_STATUS_STABLE,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  1200,
.serial_rate_max =  1200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  2000,
.retry =  3,

.has_get_func =  TT516_FUNCS,
.has_set_func =  TT516_FUNCS,
.has_get_level =  TT516_LEVELS,
.has_set_level =  RIG_LEVEL_SET(TT516_LEVELS),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END },
.attenuator =   { 15, RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  RIG_TARGETABLE_FREQ|RIG_TARGETABLE_MODE,
.transceive =  RIG_TRN_OFF,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
		{   1, 100, RIG_MTYPE_MEM, TT_MEM_CAP },
		},

.rx_range_list1 =  {
	{kHz(500),MHz(30),TT516_RXMODES,-1,-1,TT516_VFO},
	RIG_FRNG_END,
  },
.tx_range_list1 =  {
	FRQ_RNG_HF(1,TT516_MODES, W(1),W(20),TT516_VFO,TT516_ANTS),
	FRQ_RNG_HF(1,RIG_MODE_AM, W(1),W(5),TT516_VFO,TT516_ANTS),
	RIG_FRNG_END,
  },

.rx_range_list2 =  {
	{kHz(500),MHz(30),TT516_RXMODES,-1,-1,TT516_VFO},
	RIG_FRNG_END,
  },
.tx_range_list2 =  {
	FRQ_RNG_HF(2,TT516_MODES, W(1),W(20),TT516_VFO,TT516_ANTS),
	FRQ_RNG_HF(2,RIG_MODE_AM, W(1),W(5),TT516_VFO,TT516_ANTS),
	RIG_FRNG_END,
  },

.tuning_steps =  {
	 {RIG_MODE_SSB|RIG_MODE_CW,10},
	 /* {RIG_MODE_SSB|RIG_MODE_CW,kHz(1)}, */
	 {RIG_MODE_AM,100},
	 /* {RIG_MODE_AM,kHz(5)}, */
	 {RIG_MODE_FM,kHz(2.5)},
	 /* {RIG_MODE_FM,kHz(5)}, */
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
				 /* FIXME: add increments -> 34 filters? */
		{RIG_MODE_CW|RIG_MODE_SSB, kHz(2.8)},
		{RIG_MODE_CW|RIG_MODE_SSB, 200},
		{RIG_MODE_CW|RIG_MODE_SSB, 0},	/*  Filters are 200 Hz to 1000 Hz in 50 Hz steps, 1000 to 2800 Hz in 100 Hz steps */
		{RIG_MODE_AM, kHz(4)},
		{RIG_MODE_AM, kHz(6)},
		{RIG_MODE_FM, kHz(15)},
		RIG_FLT_END,
	},
.priv =  (void*)NULL,

.set_freq =  tentec2_set_freq,
.get_freq =  tentec2_get_freq,
.set_vfo =  tentec2_set_vfo,
.get_vfo =  tentec2_get_vfo,
.set_mode =  tentec2_set_mode,
.get_mode =  tentec2_get_mode,
.set_split_vfo =  tentec2_set_split_vfo,
.get_split_vfo =  tentec2_get_split_vfo,
.set_ptt =  tentec2_set_ptt,
.get_ptt =  tentec2_get_ptt,
.reset =  tentec2_reset,
.get_info =  tentec2_get_info,

};

/*
 * Function definitions below
 */