Hamlib/pcr/pcr100.c

/*
 *  Hamlib PCR backend - PCR-100 description
 *  Copyright (c) 2001 by Stephane Fillod
 *
 *		$Id: pcr100.c,v 1.2 2001-07-13 19:08:15 f4cfe Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <stdio.h>   /* Standard input/output definitions */
#include <string.h>  /* String function definitions */
#include <unistd.h>  /* UNIX standard function definitions */
#include <fcntl.h>   /* File control definitions */
#include <errno.h>   /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>

#include <hamlib/rig.h>
#include <hamlib/riglist.h>

#include "pcr.h"


#define PCR100_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define PCR100_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_ANF|RIG_FUNC_NR)

#define PCR100_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_SQLSTAT|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)

/*
 * IC PCR100 rigs capabilities.
 */
const struct rig_caps pcr100_caps = {
rig_model: RIG_MODEL_PCR100,
model_name:"IC-PCR100",
mfg_name: "Icom",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_PCRECEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_RIG,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 300,
serial_rate_max: 38400,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,

has_get_func: RIG_FUNC_NONE,
has_set_func: PCR100_FUNC,
has_get_level: PCR100_LEVEL,
has_set_level: RIG_LEVEL_SET(PCR100_LEVEL),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,    /* FIXME: parms */
level_gran: {},                 /* FIXME: granularity */
parm_gran: {},
ctcss_list: pcr1_ctcss_list,
dcs_list: NULL,
preamp:  { RIG_DBLST_END, },
attenuator:  { 20, RIG_DBLST_END, },
max_rit: Hz(0),
max_xit: Hz(0),
max_ifshift: Hz(1.2),
targetable_vfo: 0,
transceive: RIG_TRN_RIG,
bank_qty:  0,
chan_desc_sz: 0,

chan_list: { RIG_CHAN_END, },	/* no memory channel list: this is a PC receiver */

rx_range_list1: { {kHz(10),GHz(1.3),PCR100_MODES,-1,-1,RIG_VFO_A},
 	RIG_FRNG_END, },
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: { {kHz(10),MHz(824)-10,PCR100_MODES,-1,-1,RIG_VFO_A},
    {MHz(849)+10,MHz(869)-10,PCR100_MODES,-1,-1,RIG_VFO_A},
    {MHz(894)+10,GHz(1.3),PCR100_MODES,-1,-1,RIG_VFO_A},
 	RIG_FRNG_END, },
tx_range_list2: { RIG_FRNG_END, },	/* no TX ranges, this is a receiver */

tuning_steps: {
	  { PCR100_MODES,Hz(1) },
	  RIG_TS_END,
	},
	      /* mode/filter list, remember: order matters! */
filters: {
		{RIG_MODE_FM|RIG_MODE_AM, kHz(6)},
		{RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
		{RIG_MODE_FM|RIG_MODE_AM, kHz(50)},
		{RIG_MODE_WFM, kHz(230)},
		{RIG_MODE_WFM, kHz(50)},
		RIG_FLT_END,
  },
priv: NULL,	/* priv */

rig_init: pcr_init,
rig_cleanup: pcr_cleanup,
rig_open: NULL,
rig_close: NULL,

set_freq: pcr_set_freq,
get_freq: pcr_get_freq,
set_mode: pcr_set_mode,
get_mode: pcr_get_mode,

get_info:	pcr_get_info,

  /*
   * TODO:
   * set_trn, set_powerstat,
   * set_level AF,SQL,IF,AF,ATT
   * set_func: AGC,NB,TSQL, VSC?
   * get_level, get_dcd, dtmf, ..
   * decode_event, set_ctcss, set_ctcss_sql
   * and also all the associated get_ functions.
   */
};