Hamlib/icom/ic775.c

/*
 *  Hamlib CI-V backend - description of IC-775 and variations
 *  Copyright (c) 2000-2002 by Stephane Fillod
 *
 *	$Id: ic775.c,v 1.2 2002-08-16 17:43:01 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <hamlib/rig.h>
#include "icom.h"


#define IC775_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC775_1MHZ_TS_MODES (RIG_MODE_AM|RIG_MODE_FM)
#define IC775_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)

/* 
 * 100W in all modes but AM (40W)
 */ 
#define IC775_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC775_AM_TX_MODES (RIG_MODE_AM)

#define IC775_VFO_ALL (RIG_VFO_A|RIG_VFO_B)

#define IC775_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)

#define IC775_STR_CAL { 0, { } }

/*
 */
static const struct icom_priv_caps ic775_priv_caps = { 
		0x46,	/* default address */
		0,		/* 731 mode */
		ic737_ts_sc_list,
		IC775_STR_CAL
};

const struct rig_caps ic775_caps = {
.rig_model =  RIG_MODEL_IC775,
.model_name = "IC-775", 
.mfg_name =  "Icom", 
.version =  "0.2", 
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  1200,
.serial_rate_max =  1200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  RIG_FUNC_NONE, 
.has_get_level =  RIG_LEVEL_NONE,
.has_set_level =  RIG_LEVEL_NONE,
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran =  {},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  IC775_VFO_OPS,
.scan_ops =  RIG_SCAN_NONE,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
		   {   1,  10, RIG_MTYPE_MEM,   0 },
		   {  11,  12, RIG_MTYPE_EDGE,  0 },
		   RIG_CHAN_END,
		},

.rx_range_list1 =   { RIG_FRNG_END, },	/* FIXME: enter region 1 setting */
.tx_range_list1 =   { RIG_FRNG_END, },

.rx_range_list2 =   { {kHz(30),MHz(30),IC775_ALL_RX_MODES,-1,-1,IC775_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list2 =  { {kHz(1800),MHz(2)-1,IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},	/* 100W class */
    {kHz(1800),MHz(2)-1,IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},	/* 40W class */
    {kHz(3500),MHz(4)-1,IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {kHz(3500),MHz(4)-1,IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
	{MHz(7),kHz(7300),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {MHz(7),kHz(7300),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
    {kHz(10100),kHz(10150),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {kHz(10100),kHz(10150),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
    {MHz(14),kHz(14350),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {MHz(14),kHz(14350),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
    {kHz(18068),kHz(18168),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {kHz(18068),kHz(18168),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
    {MHz(21),kHz(21450),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {MHz(21),kHz(21450),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
    {kHz(24890),kHz(24990),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {kHz(24890),kHz(24990),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
    {MHz(28),kHz(29700),IC775_OTHER_TX_MODES,5000,100000,IC775_VFO_ALL},
    {MHz(28),kHz(29700),IC775_AM_TX_MODES,2000,40000,IC775_VFO_ALL},
	RIG_FRNG_END, },

.tuning_steps = 	{
	 {IC775_1HZ_TS_MODES,1},
	 {IC775_ALL_RX_MODES,10},
	 {IC775_ALL_RX_MODES,100},
	 {IC775_ALL_RX_MODES,kHz(1)},
	 {IC775_ALL_RX_MODES,kHz(5)},
	 {IC775_ALL_RX_MODES,kHz(9)},
	 {IC775_ALL_RX_MODES,kHz(10)},
	 {IC775_ALL_RX_MODES,12500},
	 {IC775_ALL_RX_MODES,kHz(20)},
	 {IC775_ALL_RX_MODES,kHz(25)},
	 {IC775_ALL_RX_MODES,kHz(100)},
	 {IC775_1MHZ_TS_MODES,MHz(1)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
.filters = 	{
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},	/* bultin FL-272 */
		{RIG_MODE_AM, kHz(8)},		/* mid w/ bultin FL-94 */
		{RIG_MODE_AM, kHz(2.4)},	/* narrow w/ bultin FL-272 */
		{RIG_MODE_FM, kHz(15)},		/* ?? TBC, mid w/ bultin FL-23+SFPC455E */
		{RIG_MODE_FM, kHz(8)},		/* narrow w/ bultin FL-94 */
		RIG_FLT_END,
	},

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&ic775_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,

};