Hamlib/yaesu/ft950.c

/*
 * hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
 *
 * ft950.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
 *           (C) Stephane Fillod 2008
 *           (C) Terry Embry 2008-2009
 *
 * This shared library provides an API for communicating
 * via serial interface to an FT-950 using the "CAT" interface
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */


#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft950.h"
#include "idx_builtin.h"

/*
 * ft950 rigs capabilities.
 * Also this struct is READONLY!
 *
 */

const struct rig_caps ft950_caps = {
    .rig_model =          RIG_MODEL_FT950,
    .model_name =         "FT-950",
    .mfg_name =           "Yaesu",
    .version =            NEWCAT_VER ".1",
    .copyright =          "LGPL",
    .status =             RIG_STATUS_STABLE,
    .rig_type =           RIG_TYPE_TRANSCEIVER,
    .ptt_type =           RIG_PTT_RIG,
    .dcd_type =           RIG_DCD_NONE,
    .port_type =          RIG_PORT_SERIAL,
    .serial_rate_min =    4800,         /* Default rate per manual */
    .serial_rate_max =    38400,
    .serial_data_bits =   8,
    .serial_stop_bits =   1,            /* Assumed since manual makes no mention */
    .serial_parity =      RIG_PARITY_NONE,
    .serial_handshake =   RIG_HANDSHAKE_HARDWARE,
    .write_delay =        FT950_WRITE_DELAY,
    .post_write_delay =   FT950_POST_WRITE_DELAY,
    .timeout =            2000,
    .retry =              0,
    .has_get_func =       FT950_FUNCS,
    .has_set_func =       FT950_FUNCS,
    .has_get_level =      FT950_LEVELS,
    .has_set_level =      RIG_LEVEL_SET(FT950_LEVELS),
    .has_get_parm =       RIG_PARM_NONE,
    .has_set_parm =       RIG_PARM_NONE,
    .level_gran = {
	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
	[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 1050 }, .step = { .i = 50 } },
    },
    .ctcss_list =         common_ctcss_list,
    .dcs_list =           NULL,
    .preamp =             { 10, 20, RIG_DBLST_END, }, /* TBC */
    .attenuator =         { 6, 12, 18, RIG_DBLST_END, },
    .max_rit =            Hz(9999),
    .max_xit =            Hz(9999),
    .max_ifshift =        Hz(1000),
    .vfo_ops =            FT950_VFO_OPS,
    .targetable_vfo =     RIG_TARGETABLE_FREQ,
    .transceive =         RIG_TRN_RIG,        /* May enable later as the 950 has an Auto Info command */
    .bank_qty =           0,
    .chan_desc_sz =       0,
    .str_cal =            FT950_STR_CAL,
    .chan_list =          {
               {   1,  99, RIG_MTYPE_MEM,  NEWCAT_MEM_CAP },
               { 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP },    /* two by two */
               { 125, 128, RIG_MTYPE_BAND, NEWCAT_MEM_CAP },    /* 60M Channels U51-U54 or US1-US4, if available */
               { 130, 130, RIG_MTYPE_BAND, NEWCAT_MEM_CAP },    /* 60M Channel U55 or US5, if available */
               { 131, 131, RIG_MTYPE_BAND, NEWCAT_MEM_CAP },    /* EU5, 5167.5 KHz Alaska Emergency Freq, if available */

               RIG_CHAN_END,
                          },

    .rx_range_list1 =     {
        {kHz(30), MHz(56), FT950_ALL_RX_MODES, -1, -1, FT950_VFO_ALL, FT950_ANTS},   /* General coverage + ham */
        RIG_FRNG_END,
    }, /* FIXME:  Are these the correct Region 1 values? */

    .tx_range_list1 =     {
        FRQ_RNG_HF(1, FT950_OTHER_TX_MODES, W(5), W(100), FT950_VFO_ALL, FT950_ANTS),
        FRQ_RNG_HF(1, FT950_AM_TX_MODES, W(2), W(25), FT950_VFO_ALL, FT950_ANTS),	/* AM class */
        FRQ_RNG_6m(1, FT950_OTHER_TX_MODES, W(5), W(100), FT950_VFO_ALL, FT950_ANTS),
        FRQ_RNG_6m(1, FT950_AM_TX_MODES, W(2), W(25), FT950_VFO_ALL, FT950_ANTS),	/* AM class */

        RIG_FRNG_END,
    },

    .rx_range_list2 =     {
        {kHz(30), MHz(56), FT950_ALL_RX_MODES, -1, -1, FT950_VFO_ALL, FT950_ANTS},
        RIG_FRNG_END,
    },

    .tx_range_list2 =     {
        FRQ_RNG_HF(2, FT950_OTHER_TX_MODES, W(5), W(100), FT950_VFO_ALL, FT950_ANTS),
        FRQ_RNG_HF(2, FT950_AM_TX_MODES, W(2), W(25), FT950_VFO_ALL, FT950_ANTS),	/* AM class */
        FRQ_RNG_6m(2, FT950_OTHER_TX_MODES, W(5), W(100), FT950_VFO_ALL, FT950_ANTS),
        FRQ_RNG_6m(2, FT950_AM_TX_MODES, W(2), W(25), FT950_VFO_ALL, FT950_ANTS),	/* AM class */

        RIG_FRNG_END,
    },

    .tuning_steps =       {
        {FT950_SSB_CW_RX_MODES, Hz(10)},    /* Normal */
        {FT950_SSB_CW_RX_MODES, Hz(100)},   /* Fast */

        {FT950_AM_RX_MODES,     Hz(100)},   /* Normal */
        {FT950_AM_RX_MODES,     kHz(1)},    /* Fast */

        {FT950_FM_RX_MODES,     Hz(100)},   /* Normal */
        {FT950_FM_RX_MODES,     kHz(1)},    /* Fast */

        RIG_TS_END,

    },

    /* mode/filter list, .remember =  order matters! */
 .filters =            {
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(1700)},    /* Normal CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(500)},     /* Narrow CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(2400)},    /* Wide   CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(2000)},    /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(1400)},    /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(1200)},    /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(800)},     /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(400)},     /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(300)},     /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(200)},     /*        CW, RTTY, PKT */
        {FT950_CW_RTTY_PKT_RX_MODES,  Hz(100)},     /*        CW, RTTY, PKT */
        {RIG_MODE_SSB,                Hz(2400)},    /* Normal SSB */
        {RIG_MODE_SSB,                Hz(1800)},    /* Narrow SSB */
        {RIG_MODE_SSB,                Hz(3000)},    /* Wide   SSB */
        {RIG_MODE_SSB,                Hz(2900)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2800)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2700)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2600)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2500)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2450)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2250)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(2100)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(1950)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(1650)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(1500)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(1350)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(1100)},    /*        SSB */
        {RIG_MODE_SSB,                Hz(850)},     /*        SSB */
        {RIG_MODE_SSB,                Hz(600)},     /*        SSB */
        {RIG_MODE_SSB,                Hz(400)},     /*        SSB */
        {RIG_MODE_SSB,                Hz(200)},     /*        SSB */
        {RIG_MODE_AM,                 Hz(9000)},    /* Normal AM */
        {RIG_MODE_AM,                 Hz(6000)},    /* Narrow AM */
        {FT950_FM_RX_MODES,           Hz(16000)},   /* Normal FM */
        {FT950_FM_RX_MODES,           Hz(9000)},    /* Narrow FM */

        RIG_FLT_END,
    },



    .priv =               NULL,           /* private data FIXME: */

    .rig_init =           newcat_init,
    .rig_cleanup =        newcat_cleanup,
    .rig_open =           newcat_open,     /* port opened */
    .rig_close =          newcat_close,    /* port closed */

    .set_freq =           newcat_set_freq,
    .get_freq =           newcat_get_freq,
    .set_mode =           newcat_set_mode,
    .get_mode =           newcat_get_mode,
    .set_vfo =            newcat_set_vfo,
    .get_vfo =            newcat_get_vfo,
    .set_ptt =            newcat_set_ptt,
    .get_ptt =            newcat_get_ptt,
    .set_split_vfo =      newcat_set_split_vfo,
    .get_split_vfo =      newcat_get_split_vfo,
    .set_rit =            newcat_set_rit,
    .get_rit =            newcat_get_rit,
    .set_xit =            newcat_set_xit,
    .get_xit =            newcat_get_xit,
    .set_ant =            newcat_set_ant,
    .get_ant =            newcat_get_ant,
    .get_func =           newcat_get_func,
    .set_func =           newcat_set_func,
    .get_level =          newcat_get_level,
    .set_level =          newcat_set_level,
    .get_mem =            newcat_get_mem,
    .set_mem =            newcat_set_mem,
    .vfo_op =             newcat_vfo_op,
    .get_info =           newcat_get_info,
    .power2mW =           newcat_power2mW,
    .mW2power =           newcat_mW2power,
    .set_rptr_shift =     newcat_set_rptr_shift,
    .get_rptr_shift =     newcat_get_rptr_shift,
    .set_ctcss_tone =     newcat_set_ctcss_tone,
    .get_ctcss_tone =     newcat_get_ctcss_tone,
    .set_ctcss_sql  =     newcat_set_ctcss_sql,
    .get_ctcss_sql  =     newcat_get_ctcss_sql,
    .set_powerstat =      newcat_set_powerstat,
    .get_powerstat =      newcat_get_powerstat,
    .set_ts =             newcat_set_ts,
    .get_ts =             newcat_get_ts,
    .set_trn =            newcat_set_trn,
    .get_trn =            newcat_get_trn,
    .set_channel =        newcat_set_channel,
    .get_channel =        newcat_get_channel,

};