Hamlib/kenwood/ts440.c

/*
 *  Hamlib Kenwood backend - TS440 description
 *  Copyright (c) 2000-2004 by Stephane Fillod
 *
 *	$Id: ts440.c,v 1.13 2005-04-04 21:31:55 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "kenwood.h"
#include "ic10.h"


#define TS440_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS440_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS440_AM_TX_MODES RIG_MODE_AM

#define TS440_FUNC_ALL RIG_FUNC_LOCK

#define TS440_LEVEL_ALL RIG_LEVEL_NONE

#define TS440_VFO (RIG_VFO_A|RIG_VFO_B)

#define TS440_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS440_SCAN_OPS (RIG_SCAN_VFO)

static const struct kenwood_priv_caps  ts440_priv_caps  = {
	.cmdtrm =  EOM_KEN,
	.if_len =  29,
};

/*
 * ts440 rig capabilities.
 *
 * TODO: scan, get/set_channel, RIT/XIT, Voice Recall, split
 *
 * part of infos comes from .http = //www.n7uic.net/radio/kenwood/ts440/specs.htm
 * .http = //public.srce.hr/9A1CDD/mods/kenwood/knwdif.mod
 * .http = //www.ifrance.fr/clucas/modposte/ts440/mod440.htm
 *
 */
const struct rig_caps ts440_caps = {
.rig_model =  RIG_MODEL_TS440,
.model_name = "TS-440",
.mfg_name =  "Kenwood",
.version =  BACKEND_VER "." IC10_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  1200,
.serial_rate_max =  4800,
.serial_data_bits =  8,
.serial_stop_bits =  2,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_HARDWARE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,

.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  TS440_FUNC_ALL,
.has_get_level =  TS440_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(TS440_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE, 
.level_gran =  {},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(9990),
.max_xit =  Hz(9990),
.max_ifshift =  Hz(0),
.targetable_vfo =  RIG_TARGETABLE_FREQ,
.vfo_ops =  TS440_VFO_OPS,
.scan_ops =  TS440_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,


.chan_list =  { {   0,  99, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} },
	     RIG_CHAN_END, },

.rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
	{kHz(100),MHz(30),TS440_ALL_MODES,-1,-1,TS440_VFO},
	RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  {
    {kHz(1800),MHz(2)-1,TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {kHz(1800),MHz(2)-1,TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {kHz(3500),MHz(4)-1,TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {kHz(3500),MHz(4)-1,TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {MHz(7),kHz(7300),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {MHz(7),kHz(7300),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {kHz(10100),kHz(10150),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {kHz(10100),kHz(10150),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {MHz(14),kHz(14350),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {MHz(14),kHz(14350),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {kHz(18068),kHz(18168),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {kHz(18068),kHz(18168),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {MHz(21),kHz(21450),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {MHz(21),kHz(21450),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {kHz(24890),kHz(24990),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {kHz(24890),kHz(24990),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
    {MHz(28),kHz(29700),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
    {MHz(28),kHz(29700),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
	RIG_FRNG_END,
  }, /* tx range */
.tuning_steps =  {
	 {TS440_ALL_MODES,10},
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.2)},
		{RIG_MODE_AM, kHz(6)},
		{RIG_MODE_FM, kHz(12)},
		RIG_FLT_END,
	},
.priv =  (void *)&ts440_priv_caps,

.set_freq =  kenwood_set_freq,
.get_freq =  ic10_get_freq,
.set_rit =  kenwood_set_rit,
.get_rit =  kenwood_get_rit,
.set_xit =  kenwood_set_xit,
.get_xit =  kenwood_get_xit,
.set_mode =  kenwood_set_mode,
.get_mode =  ic10_get_mode,
.set_vfo =  ic10_set_vfo,
.get_vfo =  ic10_get_vfo,
.set_split_vfo =  ic10_set_split_vfo,
.get_split_vfo =  ic10_get_split_vfo,
.set_ptt =  kenwood_set_ptt,
.get_ptt =  ic10_get_ptt,
.set_func =  kenwood_set_func,
.vfo_op =  kenwood_vfo_op,
.set_mem =  kenwood_set_mem,
.get_mem =  ic10_get_mem,
.set_trn =  kenwood_set_trn,
.scan =  kenwood_scan,
.set_channel = ic10_set_channel,
.get_channel = ic10_get_channel,
.decode_event = ic10_decode_event,

};

/*
 * Function definitions below
 */