Hamlib/icom/ic706.c

/*
 *  Hamlib CI-V backend - description of IC-706 and variations
 *  Copyright (c) 2000-2004 by Stephane Fillod
 *
 *	$Id: ic706.c,v 1.36 2004-09-26 08:35:03 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"

#define IC706_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_WFM)
#define IC706_1MHZ_TS_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define IC706_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)

/* tx doesn't have WFM.
 * 100W in all modes but AM (40W)
 */ 
#define IC706_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC706_AM_TX_MODES (RIG_MODE_AM)

#define IC706IIG_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN)

#define IC706IIG_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR)

#define IC706_VFO_ALL (RIG_VFO_A|RIG_VFO_B)

#define IC706_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC706_SCAN_OPS (RIG_SCAN_MEM)

/*
 * IC706IIG_REAL_STR_CAL is accurate measurements
 * IC706IIG_STR_CAL is what the S-meter displays
 *
 * calibration data was obtained from W8WWV 
 * 	http://www.seed-solutions.com/gregordy/
 */
#define IC706IIG_REAL_STR_CAL { 16, \
	{ \
		{  46, -27 }, /* S0 */ \
		{  54, -25 }, \
		{  64, -24 }, \
		{  76, -23 }, \
		{  84, -22 }, \
		{  94, -20 }, \
		{ 104, -16 }, \
		{ 113, -11 }, \
		{ 123, -5 }, \
		{ 133, 0 },  /* S9 */ \
		{ 144, 5 },  /* +10 */ \
		{ 156, 10 }, /* +20 */ \
		{ 170, 16 }, /* +30 */ \
		{ 181, 21 }, /* +40 */ \
		{ 192, 26 }, /* +50 */ \
		{ 204, 35 } /* +60 */ \
	} }

#define IC706IIG_STR_CAL { 17, \
	{ \
		{  45, -60 }, \
		{  46, -54 }, /* S0 */ \
		{  54, -48 }, \
		{  64, -42 }, \
		{  76, -36 }, \
		{  84, -30 }, \
		{  94, -24 }, \
		{ 104, -18 }, \
		{ 113, -12 }, \
		{ 123, -6 }, \
		{ 133, 0 },  /* S9 */ \
		{ 144, 10 }, /* +10 */ \
		{ 156, 20 }, /* +20 */ \
		{ 170, 30 }, /* +30 */ \
		{ 181, 40 }, /* +40 */ \
		{ 192, 50 }, /* +50 */ \
		{ 204, 60 }  /* +60 */ \
	} }

/*
 * ic706 rigs capabilities.
 * Notice that some rigs share the same functions.
 * Also this struct is READONLY!
 */
static const struct icom_priv_caps ic706_priv_caps = { 
		0x48,	/* default address */
		0,		/* 731 mode */
		ic706_ts_sc_list
};

const struct rig_caps ic706_caps = {
.rig_model =  RIG_MODEL_IC706,
.model_name = "IC-706", 
.mfg_name =  "Icom", 
.version =  BACKEND_VER, 
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_MOBILE,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  RIG_FUNC_NONE, 
.has_get_level =  RIG_LEVEL_NONE,
.has_set_level =  RIG_LEVEL_NONE,
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,	/* FIXME: parms */
.level_gran =  {}, 		/* granularity */
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { 10, RIG_DBLST_END, },
.attenuator =   { 20, RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  { RIG_CHAN_END, },	/* FIXME: memory channel list */

.rx_range_list1 =   { RIG_FRNG_END, },	/* FIXME: enter region 1 setting */
.tx_range_list1 =   { RIG_FRNG_END, },
.rx_range_list2 =   { {kHz(30),199999999,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},RIG_FRNG_END, }, /* rx range */
.tx_range_list2 =   { {kHz(1800),1999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},	/* 100W class */
    {kHz(1800),1999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},	/* 40W class */
    {kHz(3500),3999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(3500),3999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(7),kHz(7300),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(7),kHz(7300),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(10100),kHz(10150),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(10100),kHz(10150),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(14),kHz(14350),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(14),kHz(14350),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(18068),kHz(18168),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(18068),kHz(18168),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(21),kHz(21450),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(21),kHz(21450),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(24890),kHz(24990),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(24890),kHz(24990),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(28),kHz(29700),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(28),kHz(29700),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(50),MHz(54),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(50),MHz(54),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(144),MHz(148),IC706_OTHER_TX_MODES,5000,20000,IC706_VFO_ALL}, /* not sure.. */
    {MHz(144),MHz(148),IC706_AM_TX_MODES,2000,8000,IC706_VFO_ALL}, /* anyone? */
	RIG_FRNG_END, },

.tuning_steps = 	{{IC706_1HZ_TS_MODES,1},
	 {IC706_ALL_RX_MODES,10},
	 {IC706_ALL_RX_MODES,100},
	 {IC706_ALL_RX_MODES,kHz(1)},
	 {IC706_ALL_RX_MODES,kHz(5)},
	 {IC706_ALL_RX_MODES,kHz(9)},
	 {IC706_ALL_RX_MODES,kHz(10)},
	 {IC706_ALL_RX_MODES,12500},
	 {IC706_ALL_RX_MODES,kHz(20)},
	 {IC706_ALL_RX_MODES,kHz(25)},
	 {IC706_ALL_RX_MODES,kHz(100)},
	 {IC706_1MHZ_TS_MODES,MHz(1)},
	 RIG_TS_END,
	},

	/* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},	/* bultin FL-272 */
		{RIG_MODE_AM, kHz(8)},		/* mid w/ bultin FL-94 */
		{RIG_MODE_AM, kHz(2.4)},	/* narrow w/ bultin FL-272 */
		{RIG_MODE_FM, kHz(15)},		/* ?? TBC, mid w/ bultin FL-23+SFPC455E */
		{RIG_MODE_FM, kHz(8)},		/* narrow w/ bultin FL-94 */
		{RIG_MODE_WFM, kHz(230)},	/* WideFM, filter FL?? */
		RIG_FLT_END,
	},
.str_cal = IC706IIG_STR_CAL,
.priv =  (void*)&ic706_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,
.set_ts =  icom_set_ts,

.set_rptr_shift =  icom_set_rptr_shift,
.set_split_freq =  icom_set_split_freq,
.get_split_freq =  icom_get_split_freq,
.set_split_mode =  icom_set_split_mode,
.get_split_mode =  icom_get_split_mode,
.set_split_vfo =  icom_set_split_vfo,


};


static const struct icom_priv_caps ic706mkii_priv_caps = { 
		0x4e,	/* default address */
		0,		/* 731 mode */
		ic706_ts_sc_list
};

const struct rig_caps ic706mkii_caps = {
.rig_model =  RIG_MODEL_IC706MKII,
.model_name = "IC-706MkII", 
.mfg_name =  "Icom", 
.version =  BACKEND_VER, 
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_MOBILE,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  RIG_FUNC_NONE,
.has_get_level =  RIG_LEVEL_NONE,
.has_set_level =  RIG_LEVEL_NONE,
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,	/* FIXME: parms */
.level_gran =  {}, 		/* granularity */
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { 10, RIG_DBLST_END, },
.attenuator =   { 20, RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  { RIG_CHAN_END, },	/* FIXME: memory channel list */

.rx_range_list1 =   { RIG_FRNG_END, },	/* FIXME: enter region 1 setting */
.tx_range_list1 =   { RIG_FRNG_END, },
.rx_range_list2 =   { {kHz(30),199999999,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},
						 RIG_FRNG_END, }, /* rx range */
.tx_range_list2 =   { {kHz(1800),1999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},	/* 100W class */
    {kHz(1800),1999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},	/* 40W class */
    {kHz(3500),3999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(3500),3999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(7),kHz(7300),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(7),kHz(7300),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(10100),kHz(10150),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(10100),kHz(10150),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(14),kHz(14350),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(14),kHz(14350),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(18068),kHz(18168),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(18068),kHz(18168),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(21),kHz(21450),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(21),kHz(21450),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(24890),kHz(24990),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(24890),kHz(24990),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(28),kHz(29700),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(28),kHz(29700),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(50),MHz(54),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(50),MHz(54),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(144),MHz(148),IC706_OTHER_TX_MODES,5000,20000,IC706_VFO_ALL}, /* not sure.. */
    {MHz(144),MHz(148),IC706_AM_TX_MODES,2000,8000,IC706_VFO_ALL}, /* anyone? */
	RIG_FRNG_END, },

.tuning_steps = 	{
	 {IC706_1HZ_TS_MODES,1},
	 {IC706_ALL_RX_MODES,10},
	 {IC706_ALL_RX_MODES,100},
	 {IC706_ALL_RX_MODES,kHz(1)},
	 {IC706_ALL_RX_MODES,kHz(5)},
	 {IC706_ALL_RX_MODES,kHz(9)},
	 {IC706_ALL_RX_MODES,kHz(10)},
	 {IC706_ALL_RX_MODES,12500},
	 {IC706_ALL_RX_MODES,kHz(20)},
	 {IC706_ALL_RX_MODES,kHz(25)},
	 {IC706_ALL_RX_MODES,kHz(100)},
	 {IC706_1MHZ_TS_MODES,MHz(1)},
	 RIG_TS_END,
	},

	/* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},	/* bultin FL-272 */
		{RIG_MODE_AM, kHz(8)},		/* mid w/ bultin FL-94 */
		{RIG_MODE_AM, kHz(2.4)},	/* narrow w/ bultin FL-272 */
		{RIG_MODE_FM, kHz(15)},		/* ?? TBC, mid w/ bultin FL-23+SFPC455E */
		{RIG_MODE_FM, kHz(8)},		/* narrow w/ bultin FL-94 */
		{RIG_MODE_WFM, kHz(230)},	/* WideFM, filter FL?? */
		RIG_FLT_END,
	},
.str_cal = IC706IIG_STR_CAL,

.priv =  (void*)&ic706mkii_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,
.set_ts =  icom_set_ts,

.set_rptr_shift =  icom_set_rptr_shift,
.set_split_freq =  icom_set_split_freq,
.get_split_freq =  icom_get_split_freq,
.set_split_mode =  icom_set_split_mode,
.get_split_mode =  icom_get_split_mode,
.set_split_vfo =  icom_set_split_vfo,

};


/*
 * IC706MkIIG channel caps.
 */
#define IC706MKIIG_MEM_CAP {	\
	.freq = 1,	\
	.mode = 1,	\
	.width = 1,	\
	.split = 1,	\
	.tx_freq = 1,	\
	.tx_mode = 1,	\
	.tx_width = 1,	\
	.rptr_offs = 1,	\
	.rptr_shift = 1, /* only set */	\
	.funcs = IC706IIG_FUNC_ALL, \
	.levels = RIG_LEVEL_SET(IC706IIG_LEVEL_ALL), \
} 

/*
 * Basically, the IC706MKIIG is an IC706MKII plus UHF, a DSP
 * and 50W VHF
 */
static const struct icom_priv_caps ic706mkiig_priv_caps = { 
		0x58,	/* default address */
		0,		/* 731 mode */
		ic706_ts_sc_list
};

const struct rig_caps ic706mkiig_caps = {
.rig_model =  RIG_MODEL_IC706MKIIG,
.model_name = "IC-706MkIIG", 
.mfg_name =  "Icom", 
.version =  BACKEND_VER, 
.copyright =  "LGPL",
.status =  RIG_STATUS_BETA,
.rig_type =  RIG_TYPE_MOBILE,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  IC706IIG_FUNC_ALL,
.has_set_func =  IC706IIG_FUNC_ALL, 
.has_get_level =  IC706IIG_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(IC706IIG_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,	/* FIXME: parms */
.level_gran = {
	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
	},
.parm_gran =  {},
.ctcss_list =  common_ctcss_list,
.dcs_list =  NULL,
.preamp =   { 10, RIG_DBLST_END, },
.attenuator =   { 20, RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  IC706_VFO_OPS,
.scan_ops =  IC706_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
				   {   1,  99, RIG_MTYPE_MEM, IC706MKIIG_MEM_CAP },
				   { 100, 105, RIG_MTYPE_EDGE, IC706MKIIG_MEM_CAP },    /* two by two */
				   { 106, 107, RIG_MTYPE_CALL, IC706MKIIG_MEM_CAP },
				   RIG_CHAN_END,
		},

.rx_range_list1 =   { RIG_FRNG_END, },	/* FIXME: enter region 1 setting */
.tx_range_list1 =   { RIG_FRNG_END, },

.rx_range_list2 =   { {kHz(30),MHz(200)-1,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},	/* this trx also has UHF */
 	{MHz(400),MHz(470),IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list2 =  { {kHz(1800),MHz(2)-1,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},	/* 100W class */
    {kHz(1800),MHz(2)-1,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},	/* 40W class */
    {kHz(3500),MHz(4)-1,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(3500),MHz(4)-1,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
	{MHz(7),kHz(7300),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(7),kHz(7300),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(10100),kHz(10150),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(10100),kHz(10150),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(14),kHz(14350),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(14),kHz(14350),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(18068),kHz(18168),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(18068),kHz(18168),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(21),kHz(21450),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(21),kHz(21450),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {kHz(24890),kHz(24990),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {kHz(24890),kHz(24990),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(28),kHz(29700),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(28),kHz(29700),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(50),MHz(54),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
    {MHz(50),MHz(54),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
    {MHz(144),MHz(148),IC706_OTHER_TX_MODES,5000,50000,IC706_VFO_ALL}, /* 50W */
    {MHz(144),MHz(148),IC706_AM_TX_MODES,2000,20000,IC706_VFO_ALL}, /* AM VHF is 20W */
    {MHz(430),MHz(450),IC706_OTHER_TX_MODES,5000,20000,IC706_VFO_ALL},
    {MHz(430),MHz(450),IC706_AM_TX_MODES,2000,8000,IC706_VFO_ALL},
	RIG_FRNG_END, },

.tuning_steps = 	{
	 {IC706_1HZ_TS_MODES,1},
	 {IC706_ALL_RX_MODES,10},
	 {IC706_ALL_RX_MODES,100},
	 {IC706_ALL_RX_MODES,kHz(1)},
	 {IC706_ALL_RX_MODES,kHz(5)},
	 {IC706_ALL_RX_MODES,kHz(9)},
	 {IC706_ALL_RX_MODES,kHz(10)},
	 {IC706_ALL_RX_MODES,12500},
	 {IC706_ALL_RX_MODES,kHz(20)},
	 {IC706_ALL_RX_MODES,kHz(25)},
	 {IC706_ALL_RX_MODES,kHz(100)},
	 {IC706_1MHZ_TS_MODES,MHz(1)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
.filters = 	{
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},	/* bultin FL-272 */
		{RIG_MODE_AM, kHz(8)},		/* mid w/ bultin FL-94 */
		{RIG_MODE_AM, kHz(2.4)},	/* narrow w/ bultin FL-272 */
		{RIG_MODE_FM, kHz(15)},		/* ?? TBC, mid w/ bultin FL-23+SFPC455E */
		{RIG_MODE_FM, kHz(8)},		/* narrow w/ bultin FL-94 */
		{RIG_MODE_WFM, kHz(230)},	/* WideFM, filter FL?? */
		RIG_FLT_END,
	},
.str_cal = IC706IIG_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&ic706mkiig_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_level =  icom_set_level,
.get_level =  icom_get_level,
.set_func =  icom_set_func,
.get_func =  icom_get_func,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,
.set_ptt =  icom_set_ptt,
.get_ptt =  icom_get_ptt,
.get_dcd =  icom_get_dcd,
.set_ts =  icom_set_ts,
.set_rptr_shift =  icom_set_rptr_shift,
.set_rptr_offs =  icom_set_rptr_offs,
.get_rptr_offs =  icom_get_rptr_offs,
.set_split_freq =  icom_set_split_freq,
.get_split_freq =  icom_get_split_freq,
.set_split_mode =  icom_set_split_mode,
.get_split_mode =  icom_get_split_mode,
.set_split_vfo =  icom_set_split_vfo,
.get_split_vfo =  icom_mem_get_split_vfo,

};