Hamlib/kenwood/trc80.c

/*
 *  Hamlib Kenwood backend - TRC-80 description
 *  Copyright (c) 2000-2009 by Stephane Fillod
 *
 *	$Id: trc80.c,v 1.1 2009-01-29 22:54:40 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "bandplan.h"
#include "kenwood.h"


#define TRC80_ALL_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_AM|RIG_MODE_RTTY)
#define TRC80_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define TRC80_AM_TX_MODES RIG_MODE_AM

/* TODO: make sure they are implemented by kenwood generic backend, and compatible */
#define TRC80_FUNC_ALL (RIG_FUNC_TUNER|RIG_FUNC_AIP|\
		RIG_FUNC_TONE|RIG_FUNC_AIP|RIG_FUNC_NB|RIG_FUNC_VOX)

#define TRC80_LEVEL_ALL (RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_MICGAIN|\
		RIG_LEVEL_RFPOWER|RIG_LEVEL_CWPITCH|RIG_LEVEL_BKIN_DLYMS|\
		RIG_LEVEL_SQL|RIG_LEVEL_VOX)

#define TRC80_PARMS (RIG_PARM_NONE)

#define TRC80_VFO_OPS (RIG_OP_NONE)
#define TRC80_SCAN_OPS (RIG_SCAN_VFO)

#define TRC80_VFO (RIG_VFO_MEM)
#define TRC80_ANTS (0)

#define TRC80_CHANNEL_CAPS { \
	.freq=1,\
	.mode=1,\
	.tx_freq=1,\
	.tx_mode=1,\
	.split=1,\
	.flags=RIG_CHFLAG_SKIP \
	}

static struct kenwood_priv_caps trc80_priv_caps  = {
		.cmdtrm =  EOM_KEN,
};

/*
 * TRC-80/TK-80 rig capabilities.
 */
const struct rig_caps trc80_caps = {
.rig_model =  RIG_MODEL_TRC80,
.model_name = "TRC-80",
.mfg_name =  "Kenwood",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  9600,
.serial_rate_max =  9600,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_HARDWARE,
.write_delay =  0,
.post_write_delay =  100,
.timeout =  1000,
.retry =  3,

.has_get_func =  TRC80_FUNC_ALL,
.has_set_func =  TRC80_FUNC_ALL,
.has_get_level =  TRC80_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(TRC80_LEVEL_ALL),
.has_get_parm =  TRC80_PARMS,
.has_set_parm =  RIG_LEVEL_SET(TRC80_PARMS),    /* FIXME: parms */
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  kHz(1.1),
.max_xit =  0,
.max_ifshift =  Hz(0),
.targetable_vfo =  RIG_TARGETABLE_FREQ,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,
.vfo_ops = TRC80_VFO_OPS,
.scan_ops =  TRC80_SCAN_OPS,

.chan_list =  {
		{  1, 80, RIG_MTYPE_MEM, TRC80_CHANNEL_CAPS },
		RIG_CHAN_END,
	},

.rx_range_list1 =  { 
	{kHz(500),MHz(30),TRC80_ALL_MODES,-1,-1,TRC80_VFO},
	RIG_FRNG_END,
  }, /* rx range */

.tx_range_list1 =  { 
	{MHz(1.8),MHz(30),TRC80_OTHER_TX_MODES,W(15),W(100),TRC80_VFO,TRC80_ANTS},
	{MHz(1.8),MHz(30),TRC80_AM_TX_MODES,W(5),W(25),TRC80_VFO,TRC80_ANTS},	/* AM class */
	RIG_FRNG_END,
  },

.rx_range_list2 =  {
	{kHz(500),MHz(30),TRC80_ALL_MODES,-1,-1,TRC80_VFO},
	RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  {
	{MHz(1.8),MHz(30),TRC80_OTHER_TX_MODES,W(15),W(100),TRC80_VFO,TRC80_ANTS},
	{MHz(1.8),MHz(30),TRC80_AM_TX_MODES,W(5),W(25),TRC80_VFO,TRC80_ANTS},	/* AM class */
	RIG_FRNG_END,
  }, /* tx range */

.tuning_steps =  {		/* FIXME: TBC */
	 {TRC80_ALL_MODES,1},
	 {TRC80_ALL_MODES,10},
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.2)},
		{RIG_MODE_AM, kHz(5)},
		RIG_FLT_END,
	},
.priv =  (void *)&trc80_priv_caps,

.rig_init    = kenwood_init,
.rig_cleanup = kenwood_cleanup,

#if 0
.set_freq =  kenwood_set_freq,
#endif
.get_freq =  kenwood_get_freq_if,
.get_split_vfo =  kenwood_get_split_vfo_if,
.set_rit =  kenwood_set_rit,
.get_rit =  kenwood_get_rit,
.set_mode =  kenwood_set_mode,
.get_mode =  kenwood_get_mode,
.get_ptt =  kenwood_get_ptt,
.set_ptt =  kenwood_set_ptt,
.get_dcd =  kenwood_get_dcd,
.set_func =  kenwood_set_func,
.get_func =  kenwood_get_func,
.set_level =  kenwood_set_level,
.get_level =  kenwood_get_level,
.set_mem =  kenwood_set_mem,
.get_mem =  kenwood_get_mem,
.get_channel =  kenwood_get_channel,
.scan =  kenwood_scan,
.set_powerstat =  kenwood_set_powerstat,
.get_powerstat =  kenwood_get_powerstat,
.get_info =  kenwood_get_info,

};

/*
 * Function definitions below
 */