Hamlib/kachina/505dsp.c

166 wiersze
5.0 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib Kachina backend - 505DSP description
* Copyright (c) 2001-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kachina.h"
#define K505DSP_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define K505DSP_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define K505DSP_AM_TX_MODES RIG_MODE_AM
#define K505DSP_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TONE|RIG_FUNC_COMP)
#define K505DSP_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_IF|RIG_LEVEL_RAWSTR|RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD|RIG_LEVEL_BKINDL|RIG_LEVEL_CWPITCH)
#define K505DSP_PARM_ALL (RIG_PARM_NONE)
#define K505DSP_VFO (RIG_VFO_A)
#define dBm2S9(x) ((x)+73)
#define K505DSP_STR_CAL { 2, { \
{ 0, dBm2S9(-130) }, \
{ 127, dBm2S9(20) }, \
} }
/*
* 505DSP rig capabilities.
*
* protocol is documented at
* http://www.kachina-az.com/develope.htm
*
* TODO:
* - so many ...
*/
const struct rig_caps k505dsp_caps = {
.rig_model = RIG_MODEL_505DSP,
.model_name = "505DSP",
.mfg_name = "Kachina",
.version = "0.3",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_COMPUTER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 2,
.has_get_func = K505DSP_FUNC,
.has_set_func = K505DSP_FUNC,
.has_get_level = RIG_LEVEL_RAWSTR,
.has_set_level = RIG_LEVEL_SET(K505DSP_LEVEL_ALL),
.has_get_parm = K505DSP_PARM_ALL,
.has_set_parm = RIG_PARM_SET(K505DSP_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END },
.attenuator = { 20, RIG_DBLST_END },
.max_rit = Hz(9900),
.max_xit = Hz(0),
.max_ifshift = Hz(1270),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(30),MHz(30),K505DSP_ALL_MODES,-1,-1,K505DSP_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{kHz(1800),MHz(2)-100,K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{kHz(1800),MHz(2)-100,K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{kHz(3500),MHz(4)-100,K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{kHz(3500),MHz(4)-100,K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{MHz(7),kHz(7300),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{MHz(7),kHz(7300),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{kHz(10100),kHz(10150),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{kHz(10100),kHz(10150),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{MHz(14),kHz(14350),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{MHz(14),kHz(14350),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{kHz(18068),kHz(18168),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{kHz(18068),kHz(18168),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{MHz(21),kHz(21450),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{MHz(21),kHz(21450),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{kHz(24895),kHz(24995),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{kHz(24895),kHz(24995),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
{MHz(28),kHz(29700),K505DSP_OTHER_TX_MODES,W(10),W(100),K505DSP_VFO},
{MHz(28),kHz(29700),K505DSP_AM_TX_MODES,W(4),W(25),K505DSP_VFO},
RIG_FRNG_END,
},
.tuning_steps = {
{K505DSP_ALL_MODES,1}, /* FIXME: add other ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_SSB, kHz(2.7)},
{RIG_MODE_SSB, kHz(2.1)},
{RIG_MODE_SSB, kHz(3.5)},
{RIG_MODE_SSB, kHz(1.7)},
{RIG_MODE_CW, kHz(1)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_CW, kHz(2.4)},
{RIG_MODE_CW, Hz(200)},
{RIG_MODE_CW, Hz(100)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(6)},
RIG_FLT_END,
},
.str_cal = K505DSP_STR_CAL,
.set_freq = kachina_set_freq,
.set_mode = kachina_set_mode,
.get_level = kachina_get_level,
};
/*
* Function definitions below
*/