Hamlib/icom/ic751.c

224 wiersze
7.7 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of IC-751 and variations
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "bandplan.h"
#include "icom.h"
#include "idx_builtin.h"
/*
* FM is an option on the Icom IC-751, and built-in in the Icom IC-751A
*/
#define IC751_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
/*
* 200W in all modes but AM (40W)
*/
#define IC751_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC751_AM_TX_MODES (RIG_MODE_AM)
#define IC751_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)
#define IC751_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define IC751_SCAN_OPS (RIG_SCAN_NONE)
#define IC751_ANTS RIG_ANT_1
/*
* S-Meter measurements
* (Only the Piexx UX-14px rev.2 and up has an S-meter option.)
* Values based on the readings of my IC-751A S-meter, i.e. not
* actual signal strength. -- Lars, sm6rpz
*/
#define IC751_STR_CAL { 16, { \
{ 3, -52 }, /* S0.5 */ \
{ 12, -48 }, /* S1 */ \
{ 33, -42 }, /* S2 */ \
{ 45, -36 }, /* S3 */ \
{ 60, -30 }, /* S4 */ \
{ 73, -24 }, /* S5 */ \
{ 86, -18 }, /* S6 */ \
{ 100, -12 }, /* S7 */ \
{ 115, -6 }, /* S8 */ \
{ 129, 0 }, /* S9 */ \
{ 160, 10 }, /* S9+10 */ \
{ 186, 20 }, /* S9+20 */ \
{ 208, 30 }, /* S9+30 */ \
{ 226, 40 }, /* S9+40 */ \
{ 241, 50 }, /* S9+50 */ \
{ 255, 60 } /* S9+60 */ \
} }
/*
*/
static const struct icom_priv_caps ic751_priv_caps = {
0x1c, /* default address */
0, /* 731 mode */
ic737_ts_sc_list
};
const struct rig_caps ic751_caps = {
.rig_model = RIG_MODEL_IC751,
.model_name = "IC-751",
.mfg_name = "Icom",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG, /* Piexx UX-14px has a PTT option */
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 9600, /* Piexx UX-14px can use 9600 */
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
/* Piexx UX-14px has an S-meter option */
.has_get_level = (RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH),
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC751_VFO_OPS,
.scan_ops = IC751_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 32, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100),MHz(30),IC751_ALL_RX_MODES,-1,-1,IC751_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
{MHz(1.8),MHz(1.99999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL}, /* 100W class */
{MHz(1.8),MHz(1.99999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL}, /* 40W class */
{MHz(3.45),MHz(4.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(3.45),MHz(4.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(6.95),MHz(7.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(6.95),MHz(7.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(9.95),MHz(10.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(9.95),MHz(10.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(13.95),MHz(14.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(13.95),MHz(14.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(17.95),MHz(18.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(17.95),MHz(18.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(20.95),MHz(21.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(20.95),MHz(21.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(24.45),MHz(25.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(24.45),MHz(25.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(27.95),MHz(30),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(27.95),MHz(30),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100),MHz(30),IC751_ALL_RX_MODES,-1,-1,IC751_VFO_ALL},
RIG_FRNG_END, },
/* weird transmit ranges ... --sf */
.tx_range_list2 = {
{MHz(1.8),MHz(1.99999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL}, /* 100W class */
{MHz(1.8),MHz(1.99999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL}, /* 40W class */
{MHz(3.45),MHz(4.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(3.45),MHz(4.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(6.95),MHz(7.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(6.95),MHz(7.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(9.95),MHz(10.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(9.95),MHz(10.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(13.95),MHz(14.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(13.95),MHz(14.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(17.95),MHz(18.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(17.95),MHz(18.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(20.95),MHz(21.49999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(20.95),MHz(21.49999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(24.45),MHz(25.09999),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(24.45),MHz(25.09999),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
{MHz(27.95),MHz(30),IC751_OTHER_TX_MODES,W(10),W(200),IC751_VFO_ALL},
{MHz(27.95),MHz(30),IC751_AM_TX_MODES,W(10),W(40),IC751_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{IC751_ALL_RX_MODES,10}, /* basic resolution, there's no set_ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.3)},
{RIG_MODE_RTTY|RIG_MODE_CW, Hz(500)},
{RIG_MODE_RTTY|RIG_MODE_CW, Hz(250)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.str_cal = IC751_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic751_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.get_level = icom_get_level,
.set_ptt = icom_set_ptt,/* Piexx UX-14px has no get_ptt only set_ptt */
};