Hamlib/rigs/yaesu/ft757gx.h

115 wiersze
3.6 KiB
C
Czysty Zwykły widok Historia

/*
* hamlib - (C) Frank Singleton 2000 (vk3fcs@@ix.netcom.com)
*
* ft757gx.h - (C) Frank Singleton 2000 (vk3fcs@@ix.netcom.com)
* This shared library provides an API for communicating
* via serial interface to an FT-757GX using the "CAT" interface
* box (FIF-232C) or similar (max232 + some capacitors :-)
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef _FT757GX_H
#define _FT757GX_H 1
#define FT757GX_STATUS_UPDATE_DATA_LENGTH 75
#define FT757GX_PACING_INTERVAL 0
#define FT757GX_PACING_DEFAULT_VALUE 0
#define FT757GX_WRITE_DELAY 50
/* number of BCD digits--2 digits per octet */
#define BCD_LEN 8
/* Sequential fast writes confuse my FT757GX without this delay */
#define FT757GX_POST_WRITE_DELAY 5
/* Rough safe value for default timeout */
#define FT757GX_DEFAULT_READ_TIMEOUT FT757GX_STATUS_UPDATE_DATA_LENGTH * (5 + (FT757GX_PACING_INTERVAL * FT757GX_PACING_DEFAULT_VALUE))
/*
* Some useful offsets in the status update map (offset = book byte value - 1)
*
* Status Update Chart, FT757GXII
*/
#define STATUS_CURR_FREQ 5 /* Operating Frequency */
#define STATUS_CURR_MODE 9
#define STATUS_VFOA_FREQ 10
#define STATUS_VFOA_MODE 14
#define STATUS_VFOB_FREQ 15
#define STATUS_VFOB_MODE 19
/* Mode values for both set and get */
#define MODE_LSB 0x00
#define MODE_USB 0x01
#define MODE_CWW 0x02
#define MODE_CWN 0x03
#define MODE_AM 0x04
#define MODE_FM 0x05
/* TODO: get better measure numbers */
#define FT757GXII_STR_CAL { 2, { \
{ 0, -60 }, /* S0 -6dB */ \
{ 15, 60 } /* +60 */ \
} }
#define FT757_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1 \
}
/*
* Receiver caps
*/
#define FT757GX_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
/*
* TX caps
*/
#define FT757GX_ALL_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
/* Backend fucntion prototypes. These map to frontend functions. */
static int ft757_init(RIG *rig);
static int ft757_cleanup(RIG *rig);
static int ft757_open(RIG *rig);
static int ft757gx_get_conf(RIG *rig, token_t token, char *val);
static int ft757gx_set_conf(RIG *rig, token_t token, const char *val);
static int ft757_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft757_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int ft757gx_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int ft757_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); /* select mode */
static int ft757_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width); /* get mode */
static int ft757_set_vfo(RIG *rig, vfo_t vfo); /* select vfo */
static int ft757_get_vfo(RIG *rig, vfo_t *vfo); /* get vfo */
static int ft757_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
static int ft757_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
#endif /* _FT757GX_H */