Hamlib/icom/ic703.c

229 wiersze
7.5 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of IC-703
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#include "bandplan.h"
#include "idx_builtin.h"
#define IC703_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC703_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC703_AM_TX_MODES (RIG_MODE_AM)
#define IC703_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_ANF|RIG_FUNC_MON)
#define IC703_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_ALC|RIG_LEVEL_SWR|RIG_LEVEL_METER|RIG_LEVEL_COMP|RIG_LEVEL_RF|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_NR|RIG_LEVEL_IF|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT)
#define IC703_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define IC703_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC703_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM)
#define IC703_ANTS (RIG_ANT_1)
/*
* IC703_REAL_STR_CAL is accurate measurements
* IC703_STR_CAL is what the S-meter displays
*
* FIXME: calibration data cloned from IC706
*/
#define IC703_STR_CAL { 17, \
2019-11-30 16:19:08 +00:00
{ \
{ 45, -60 }, \
{ 46, -54 }, /* S0 */ \
{ 54, -48 }, \
{ 64, -42 }, \
{ 76, -36 }, \
{ 84, -30 }, \
{ 94, -24 }, \
{ 104, -18 }, \
{ 113, -12 }, \
{ 123, -6 }, \
{ 133, 0 }, /* S9 */ \
{ 144, 10 }, /* +10 */ \
{ 156, 20 }, /* +20 */ \
{ 170, 30 }, /* +30 */ \
{ 181, 40 }, /* +40 */ \
{ 192, 50 }, /* +50 */ \
{ 204, 60 } /* +60 */ \
} }
/*
* ic703 rigs capabilities.
*/
2019-11-30 16:19:08 +00:00
static const struct icom_priv_caps ic703_priv_caps =
{
0x68, /* default address */
0, /* 731 mode */
0, /* no XCHG */
2019-11-30 16:19:08 +00:00
ic706_ts_sc_list
};
2019-11-30 16:19:08 +00:00
const struct rig_caps ic703_caps =
{
.rig_model = RIG_MODEL_IC703,
.model_name = "IC-703",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
2019-11-30 16:19:08 +00:00
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_MOBILE,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = IC703_FUNC_ALL,
.has_set_func = IC703_FUNC_ALL,
.has_get_level = IC703_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC703_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: 2 levels */
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC703_VFO_OPS,
.scan_ops = IC703_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 105, RIG_MTYPE_EDGE }, /* two by two */
{ 106, 107, RIG_MTYPE_CALL },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(30), MHz(60), IC703_ALL_RX_MODES, -1, -1, IC703_VFO_ALL, IC703_ANTS},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC703_OTHER_TX_MODES, W(0.1), W(10), IC703_VFO_ALL, IC703_ANTS),
FRQ_RNG_6m(1, IC703_OTHER_TX_MODES, W(0.1), W(10), IC703_VFO_ALL, IC703_ANTS),
FRQ_RNG_HF(1, IC703_AM_TX_MODES, W(0.1), W(4), IC703_VFO_ALL, IC703_ANTS), /* AM class */
FRQ_RNG_6m(1, IC703_AM_TX_MODES, W(0.1), W(4), IC703_VFO_ALL, IC703_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(60), IC703_ALL_RX_MODES, -1, -1, IC703_VFO_ALL, IC703_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC703_OTHER_TX_MODES, W(0.1), W(10), IC703_VFO_ALL, IC703_ANTS),
FRQ_RNG_6m(2, IC703_OTHER_TX_MODES, W(0.1), W(10), IC703_VFO_ALL, IC703_ANTS),
FRQ_RNG_HF(2, IC703_AM_TX_MODES, W(0.1), W(4), IC703_VFO_ALL, IC703_ANTS), /* AM class */
FRQ_RNG_6m(2, IC703_AM_TX_MODES, W(0.1), W(4), IC703_VFO_ALL, IC703_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC703_ALL_RX_MODES, 10},
{IC703_ALL_RX_MODES, 100},
{IC703_ALL_RX_MODES, kHz(1)},
{IC703_ALL_RX_MODES, kHz(5)},
{IC703_ALL_RX_MODES, kHz(9)},
{IC703_ALL_RX_MODES, kHz(10)},
{IC703_ALL_RX_MODES, 12500},
{IC703_ALL_RX_MODES, kHz(20)},
{IC703_ALL_RX_MODES, kHz(25)},
{IC703_ALL_RX_MODES, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_CWR | RIG_MODE_RTTYR, kHz(2.4)}, /* bultin FL-272 */
{RIG_MODE_AM, kHz(9)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
{RIG_MODE_FM, kHz(15)}, /* ?? TBC, mid w/ bultin FL-23+SFPC455E */
{RIG_MODE_FM, kHz(9)}, /* narrow w/ bultin FL-94 */
RIG_FLT_END,
},
.str_cal = IC703_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic703_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.set_rptr_shift = icom_set_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
};