Hamlib/icom/ic821h.c

/*
 *  Hamlib CI-V backend - description of IC-821H (VHF/UHF All-Mode Tranceiver)
 *  Contributed by Francois Retief <fgretief@sun.ac.za>
 *  Copyright (c) 2000-2010 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "icom.h"


#define IC821H_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)

#define IC821H_VFO_ALL (RIG_VFO_A|RIG_VFO_C|RIG_VFO_MEM)
/* FIXME: What about MAIN/SUB mode? And satellite mode? */

#define IC821H_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_CPY|RIG_OP_MCL)

#define IC821H_SCAN_OPS (RIG_SCAN_MEM)
/* FIXME: Manual talks about 3 modes: Programmed scan, Memory scan and
 * Mode select memory scan operation. How do i encode these?
 */


#define IC821H_STR_CAL { 0, { } }
/*
 */
static const struct icom_priv_caps ic821h_priv_caps = {
   	0x4c,   		/* default address */
    1,          /* 731 mode */
    0,          /* no XCHG */
   	ic737_ts_sc_list
};

const struct rig_caps ic821h_caps = {
.rig_model =  RIG_MODEL_IC821H,
.model_name = "IC-821H",
.mfg_name =  "Icom",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_ALPHA,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  RIG_FUNC_NONE,
.has_get_level =  RIG_LEVEL_NONE,
.has_set_level =  RIG_LEVEL_NONE,
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran =  {},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },    /* Attanuator 15dB for each band. manual button */
.max_rit =  Hz(0),     /* SSB,CW: +-1.0kHz  FM: +-5.0kHz */
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),	/* 1.2kHz manual knob */
.targetable_vfo =  0,
.vfo_ops =  IC821H_VFO_OPS,
.scan_ops =  IC821H_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
                   /* FIXME: Each band has 80 channels (2*80) */
                   {   1,  80, RIG_MTYPE_MEM  },
                   {  81,  82, RIG_MTYPE_EDGE },
				   RIG_CHAN_END,
		},

.rx_range_list1 =   {
    {MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
    {MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list1 =  {
    {MHz(144),MHz(146),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
    {MHz(144),MHz(146),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
    {MHz(430),MHz(440),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
    {MHz(430),MHz(440),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
	RIG_FRNG_END, },

.rx_range_list2 =   {
    {MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
    {MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
	RIG_FRNG_END, },
    /*
     *   From manual:    VHF                UHF
     * USA           144.0-148.0 MHz    430.0-450.0 MHz
     * Europe        144.0-146.0 MHz    430.0-440.0 MHz
     * Australia     144.0-148.0 MHz    430.0-450.0 MHz
     * Sweden        144.0-146.0 MHz    432.0-438.0 MHz
     */
.tx_range_list2 =  {
    {MHz(144),MHz(148),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
    {MHz(144),MHz(148),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
    {MHz(430),MHz(450),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
    {MHz(430),MHz(450),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
	RIG_FRNG_END, },

.tuning_steps = 	{
    {RIG_MODE_SSB|RIG_MODE_CW,1},
    {RIG_MODE_SSB|RIG_MODE_CW,10},
    {RIG_MODE_SSB|RIG_MODE_CW,50},
    {RIG_MODE_SSB|RIG_MODE_CW,100},
    {RIG_MODE_FM,kHz(5)},
    RIG_TS_END, },
	/* mode/filter list, remember: order matters! */
.filters = 	{
    {RIG_MODE_CW|RIG_MODE_SSB, kHz(2.3)},   /* buildin */
    {RIG_MODE_FM, kHz(15)},                 /* buildin */
     RIG_FLT_END, },

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&ic821h_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.decode_event =  icom_decode_event,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,

};