Hamlib/icom/ic737.c

181 wiersze
4.7 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of IC-737
* Copyright (c) 2000-2003 by Stephane Fillod
*
* $Id: ic737.c,v 1.4 2003-11-16 17:24:34 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include <bandplan.h>
#include "icom.h"
/*
* IC-737
*/
#define IC737_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
/*
* 100W in all modes but AM (40W)
*/
#define IC737_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define IC737_AM_TX_MODES (RIG_MODE_AM)
#define IC737_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
#define IC737_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_CPY)
#define IC737_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_PROG|RIG_SCAN_VFO)
#define IC737_ANTS (RIG_ANT_1|RIG_ANT_2)
static const struct icom_priv_caps ic737_priv_caps = {
0x3c, /* default address */
0, /* 731 mode */
ic737_ts_sc_list
};
const struct rig_caps ic737_caps = {
.rig_model = RIG_MODEL_IC737,
.model_name = "IC-737",
.mfg_name = "Icom",
.version = "0.2.1",
.copyright = "LGPL",
.status = RIG_STATUS_NEW,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC737_VFO_OPS,
.scan_ops = IC737_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 100, RIG_MTYPE_MEM },
{ 101, 101, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(30),MHz(30),IC737_ALL_RX_MODES,-1,-1,IC737_VFO_ALL,IC737_ANTS},
RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1,IC737_OTHER_TX_MODES, W(10),W(100),IC737_VFO_ALL,IC737_ANTS),
FRQ_RNG_HF(1,IC737_AM_TX_MODES, W(10),W(40),IC737_VFO_ALL,IC737_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30),MHz(30),IC737_ALL_RX_MODES,-1,-1,IC737_VFO_ALL,IC737_ANTS},
RIG_FRNG_END, },
.tx_range_list2 = {
FRQ_RNG_HF(2,IC737_OTHER_TX_MODES, W(10),W(100),IC737_VFO_ALL,IC737_ANTS),
FRQ_RNG_HF(2,IC737_AM_TX_MODES, W(10),W(40),IC737_VFO_ALL,IC737_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{IC737_ALL_RX_MODES,10},
{IC737_ALL_RX_MODES,kHz(1)},
{IC737_ALL_RX_MODES,kHz(2)},
{IC737_ALL_RX_MODES,kHz(3)},
{IC737_ALL_RX_MODES,kHz(4)},
{IC737_ALL_RX_MODES,kHz(5)},
{IC737_ALL_RX_MODES,kHz(6)},
{IC737_ALL_RX_MODES,kHz(7)},
{IC737_ALL_RX_MODES,kHz(8)},
{IC737_ALL_RX_MODES,kHz(9)},
{IC737_ALL_RX_MODES,kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.1)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic737_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ts = icom_set_ts,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
};