Hamlib/winradio/wr1000.c

111 wiersze
3.5 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib WiNRADiO backend - WR1000 description
* Copyright (c) 2001-2002 by Stephane Fillod
*
* $Id: wr1000.c,v 1.3 2002-08-16 17:43:02 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <hamlib/rig.h>
#include "winradio.h"
/*
* Winradio rigs capabilities.
*/
#define WR1000_FUNC 0
#define WR1000_SET_LEVEL (RIG_LEVEL_ATT | RIG_LEVEL_AF)
#define WR1000_LEVEL (WR1000_SET_LEVEL | RIG_LEVEL_STRENGTH)
#define WR1000_MODES (RIG_MODE_AM | \
RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_FM)
const struct rig_caps wr1000_caps = {
.rig_model = RIG_MODEL_WR1000,
.model_name = "WR-1000",
.mfg_name = "Winradio",
.version = "0.6",
.copyright = "LGPL",
.status = RIG_STATUS_NEW,
.rig_type = RIG_TYPE_PCRECEIVER,
.port_type = RIG_PORT_DEVICE,
.targetable_vfo = 0,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.has_get_func = WR1000_FUNC,
.has_set_func = WR1000_FUNC,
.has_get_level = WR1000_LEVEL,
.has_set_level = WR1000_SET_LEVEL,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.ctcss_list = NULL,
.dcs_list = NULL,
.chan_list = { RIG_CHAN_END, },
.transceive = RIG_TRN_OFF,
.attenuator = { 20, RIG_DBLST_END, },
.rx_range_list1 = { {.start=kHz(500),.end=MHz(1300),.modes=WR1000_MODES,
.low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
{.start=MHz(30),.end=MHz(1300),.modes=RIG_MODE_WFM,
.low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
RIG_FRNG_END, },
.rx_range_list2 = { {.start=kHz(500),.end=MHz(824),.modes=WR1000_MODES,
.low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
{.start=MHz(30),.end=MHz(824),.modes=RIG_MODE_WFM,
.low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
{.start=MHz(849),.end=MHz(869),
.modes=WR1000_MODES|RIG_MODE_WFM,
.low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
{.start=MHz(894),.end=MHz(1300),
.modes=WR1000_MODES|RIG_MODE_WFM,
.low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
RIG_FRNG_END, },
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = { {WR1000_MODES|RIG_MODE_WFM,100},
RIG_TS_END, },
.filters = { {RIG_MODE_SSB|RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(17)},
{RIG_MODE_WFM, kHz(230)},
RIG_FLT_END, },
.priv = NULL, /* priv */
.rig_init = wr_rig_init,
.set_freq = wr_set_freq,
.get_freq = wr_get_freq,
.set_mode = wr_set_mode,
.get_mode = wr_get_mode,
.set_powerstat = wr_set_powerstat,
.get_powerstat = wr_get_powerstat,
.set_level = wr_set_level,
.get_level = wr_get_level,
.set_func = NULL,
.get_func = NULL,
.get_info = wr_get_info,
};