Hamlib/winradio/wr1000.c

/*
 *  Hamlib WiNRADiO backend - WR1000 description
 *  Copyright (c) 2001-2002 by Stephane Fillod
 *
 *	$Id: wr1000.c,v 1.3 2002-08-16 17:43:02 fillods Exp $
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <hamlib/rig.h>
#include "winradio.h"


/*
 * Winradio rigs capabilities.
 */

#define WR1000_FUNC  0
#define WR1000_SET_LEVEL (RIG_LEVEL_ATT | RIG_LEVEL_AF)
#define WR1000_LEVEL (WR1000_SET_LEVEL | RIG_LEVEL_STRENGTH)

#define WR1000_MODES (RIG_MODE_AM | \
                     RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_FM)

const struct rig_caps wr1000_caps = {
  .rig_model =      RIG_MODEL_WR1000,
  .model_name =     "WR-1000",
  .mfg_name =       "Winradio",
  .version =        "0.6",
  .copyright = 	 "LGPL",
  .status =         RIG_STATUS_NEW,
  .rig_type =       RIG_TYPE_PCRECEIVER,
  .port_type =      RIG_PORT_DEVICE,
  .targetable_vfo = 	 0,
  .ptt_type =       RIG_PTT_NONE,
  .dcd_type =       RIG_DCD_NONE,
  .has_get_func =   WR1000_FUNC,
  .has_set_func =   WR1000_FUNC,
  .has_get_level =  WR1000_LEVEL,
  .has_set_level =  WR1000_SET_LEVEL,
  .has_get_parm = 	 RIG_PARM_NONE,
  .has_set_parm = 	 RIG_PARM_NONE,
  .ctcss_list = 	 NULL,
  .dcs_list =   	 NULL,
  .chan_list = 	 { RIG_CHAN_END, },
  .transceive =     RIG_TRN_OFF,
  .attenuator =     { 20, RIG_DBLST_END, },
  .rx_range_list1 =  { {.start=kHz(500),.end=MHz(1300),.modes=WR1000_MODES,
		   	 .low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
			{.start=MHz(30),.end=MHz(1300),.modes=RIG_MODE_WFM,
		    	 .low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
		    	RIG_FRNG_END, },
  .rx_range_list2 = { {.start=kHz(500),.end=MHz(824),.modes=WR1000_MODES,
		    	 .low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
			{.start=MHz(30),.end=MHz(824),.modes=RIG_MODE_WFM,
		    	 .low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
			{.start=MHz(849),.end=MHz(869),
			 .modes=WR1000_MODES|RIG_MODE_WFM,
		    	 .low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
			{.start=MHz(894),.end=MHz(1300),
			 .modes=WR1000_MODES|RIG_MODE_WFM,
		    	 .low_power=-1,.high_power=-1,.vfo=RIG_VFO_A},
		    	RIG_FRNG_END, },

  .tx_range_list2 =  { RIG_FRNG_END, },

  .tuning_steps =  { {WR1000_MODES|RIG_MODE_WFM,100}, 
  				  RIG_TS_END, },

  .filters =       { {RIG_MODE_SSB|RIG_MODE_AM, kHz(6)},
                  {RIG_MODE_FM, kHz(17)},
                  {RIG_MODE_WFM, kHz(230)},
                  RIG_FLT_END, },

  .priv = 			NULL,	/* priv */

  .rig_init =     wr_rig_init,

  .set_freq =     wr_set_freq,
  .get_freq =     wr_get_freq,
  .set_mode =     wr_set_mode,
  .get_mode =     wr_get_mode,
  
  .set_powerstat =   wr_set_powerstat,
  .get_powerstat =   wr_get_powerstat,
  .set_level =     wr_set_level,
  .get_level =     wr_get_level,
  .set_func =      NULL,
  .get_func =      NULL,

  .get_info =      wr_get_info,
};