Hamlib/icom/ic275.c

144 wiersze
3.7 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of IC-275 and variations
* Copyright (c) 2000-2003 by Stephane Fillod
*
* $Id: ic275.c,v 1.6 2003-11-16 17:14:42 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#define IC275_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define IC275_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
#define IC275_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define IC275_STR_CAL { 0, { } }
/*
* FIXME: this appears to be the IC-275A/E
* what about the IC-275H ? please give it a fix. --SF
*/
static const struct icom_priv_caps ic275_priv_caps = {
0x10, /* default address */
0, /* 731 mode */
ic737_ts_sc_list
};
const struct rig_caps ic275_caps = {
.rig_model = RIG_MODEL_IC275,
.model_name = "IC-275",
.mfg_name = "Icom",
.version = "0.2",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC275_VFO_OPS,
.scan_ops = RIG_SCAN_NONE,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE },
{ 102, 102, RIG_MTYPE_CALL },
RIG_CHAN_END,
},
.rx_range_list1 = { {MHz(138),MHz(174),IC275_MODES,-1,-1,IC275_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = { {MHz(144),MHz(146),IC275_MODES,W(2.5),W(25),IC275_VFO_ALL},
RIG_FRNG_END, },
.rx_range_list2 = { {MHz(138),MHz(174),IC275_MODES,-1,-1,IC275_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = { {MHz(144),MHz(148),IC275_MODES,W(2.5),W(25),IC275_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{IC275_MODES,10}, /* TBC: does this rig supports settin tuning step? */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.2)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic275_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
};