Hamlib/uniden/bc895.c

/*
 *  Hamlib Uniden backend - BC895 description
 *  Copyright (c) 2001-2008 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "uniden.h"


#define BC895_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define BC895_FUNC (RIG_FUNC_MUTE)

#define BC895_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_RAWSTR)

#define BC895_PARM_ALL (RIG_PARM_NONE)

#define BC895_VFO RIG_VFO_A

#define BC895_CHANNEL_CAPS \
		UNIDEN_CHANNEL_CAPS \
		.ctcss_sql=1, \
		.dcs_sql=1

/* The BC895 seems to max out at 32 while 12 seems to be about minimum. */
#define BC895_STR_CAL { 4, \
        { \
		{   0, -54 }, \
		{  12, -20 }, /* TBC */ \
		{  32,   4 }, /* TBC */ \
		{ 255,  60 }, \
	} }


/*
 * bc895 rig capabilities.
 *
 * TODO: check this with manual or web site.
 */
const struct rig_caps bc895_caps = {
.rig_model =  RIG_MODEL_BC895,
.model_name = "BC895xlt",
.mfg_name =  "Uniden",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRUNKSCANNER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  2400,
.serial_rate_max =  9600,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  1,
.timeout =  200,
.retry =  3,

.has_get_func =  BC895_FUNC,
.has_set_func =  BC895_FUNC,
.has_get_level =  BC895_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(BC895_LEVEL_ALL),
.has_get_parm =  BC895_PARM_ALL,
.has_set_parm =  RIG_PARM_SET(BC895_PARM_ALL),
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.ctcss_list =  uniden_ctcss_list,
.dcs_list =  uniden_dcs_list,
.preamp =   { RIG_DBLST_END },
.attenuator =   { RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.transceive =  RIG_TRN_OFF,
.bank_qty =   10,	/* A..J */
.chan_desc_sz =  0,
.str_cal = BC895_STR_CAL,

.chan_list =  {
		{ 1, 300, RIG_MTYPE_MEM, {BC895_CHANNEL_CAPS} },
		RIG_CHAN_END,
	},

.rx_range_list1 =  { RIG_FRNG_END, },    /* FIXME: enter region 1 setting */
.tx_range_list1 =  { RIG_FRNG_END, },
.rx_range_list2 =  {
	{MHz(29),MHz(956),BC895_MODES,-1,-1,BC895_VFO},
	RIG_FRNG_END,
  },
.tx_range_list2 =  { RIG_FRNG_END, },
.tuning_steps =  {
	 {BC895_MODES,kHz(5)},
	 {BC895_MODES,kHz(7.5)},
	 {BC895_MODES,kHz(10)},
	 {BC895_MODES,kHz(12.5)},
	 {BC895_MODES,kHz(25)},
	 {BC895_MODES,kHz(50)},
	 RIG_TS_END,
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
		{RIG_MODE_WFM, kHz(230)},
		RIG_FLT_END,
	},
.priv =  NULL,

.set_freq =  uniden_set_freq,
.get_freq =  uniden_get_freq,
.set_mode =  uniden_set_mode,
.get_mode =  uniden_get_mode,
.set_mem =  uniden_set_mem,
.get_mem =  uniden_get_mem,
.get_dcd =  uniden_get_dcd,
.get_info =  uniden_get_info,
.get_level = uniden_get_level,
.set_level = uniden_set_level,
.get_channel = uniden_get_channel,
.set_channel = uniden_set_channel,


};

/*
 * Function definitions below
 */