Hamlib/pcr/pcr1000.c

/*
 *  Hamlib PCR backend - PCR-1000 description
 *  Copyright (c) 2001-2009 by Stephane Fillod and Darren Hatcher
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>

#include "pcr.h"
#include "idx_builtin.h"

#define PCR1000_MODES ( RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_WFM | RIG_MODE_CW | RIG_MODE_SSB )

#define PCR1000_FUNC ( RIG_FUNC_NB | RIG_FUNC_TSQL | RIG_FUNC_NB | \
            RIG_FUNC_ANF | RIG_FUNC_NR | RIG_FUNC_AFC )

#define PCR1000_LEVEL ( \
			RIG_LEVEL_ATT | RIG_LEVEL_AF | RIG_LEVEL_SQL | RIG_LEVEL_IF | \
			RIG_LEVEL_AGC | RIG_LEVEL_STRENGTH | RIG_LEVEL_RAWSTR | \
			RIG_LEVEL_NR )

static const struct pcr_priv_caps pcr1000_priv = {
	.reply_size	= 6,
	.reply_offset	= 1,
	.always_sync	= 0,
};

/*
 * IC PCR1000 rigs capabilities.
 */
const struct rig_caps pcr1000_caps = {
	.rig_model		= RIG_MODEL_PCR1000,
	.model_name		= "IC-PCR1000",
	.mfg_name		= "Icom",
	.version		= BACKEND_VER,
	.copyright		= "LGPL",
	.status			= RIG_STATUS_BETA,

	.rig_type		= RIG_TYPE_PCRECEIVER,
	.ptt_type		= RIG_PTT_NONE,
	.dcd_type		= RIG_DCD_RIG,
	.port_type		= RIG_PORT_SERIAL,

	.serial_rate_min	= 9600, /* slower speeds gave troubles */
	.serial_rate_max	= 38400,
	.serial_data_bits	= 8,
	.serial_stop_bits	= 1,
	.serial_parity		= RIG_PARITY_NONE,
	.serial_handshake	= RIG_HANDSHAKE_HARDWARE,

	.write_delay		= 12,
	.post_write_delay	= 2,
	.timeout		= 400,
	.retry			= 3,

	.has_get_func		= PCR1000_FUNC,
	.has_set_func		= PCR1000_FUNC,
	.has_get_level		= PCR1000_LEVEL,
	.has_set_level		= RIG_LEVEL_SET(PCR1000_LEVEL),
	.has_get_parm		= RIG_PARM_NONE,
	.has_set_parm		= RIG_PARM_NONE,

	.level_gran = {
		[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
		/* XXX check this */
		[LVL_IF] = { .min = { .i = -1270 }, .max = { .i = 1270 }, .step = { .i = 10 } },
	},
	.parm_gran		= {},

	.ctcss_list		= pcr_ctcss_list,
	.dcs_list		= NULL,
	.preamp			= { RIG_DBLST_END },
	.attenuator		= { 20, RIG_DBLST_END },

	.max_rit		= Hz(0),
	.max_xit		= Hz(0),
	.max_ifshift		= kHz(1.2),

	.targetable_vfo		= 0,
	.transceive		= RIG_TRN_RIG,
	.bank_qty		= 0,
	.chan_desc_sz		= 0,
	.chan_list		= { RIG_CHAN_END },

	.rx_range_list1 = {
		{ kHz(10), GHz(1.3), PCR1000_MODES, -1, -1, RIG_VFO_A},
		RIG_FRNG_END
	},
	.tx_range_list1 = { RIG_FRNG_END },
	.rx_range_list2 = {
		{ kHz(10), MHz(824) - 10, PCR1000_MODES, -1, -1, RIG_VFO_A },
		{ MHz(849) + 10, MHz(869) - 10, PCR1000_MODES, -1, -1, RIG_VFO_A },
		{ MHz(894) + 10, GHz(1.3), PCR1000_MODES, -1, -1, RIG_VFO_A },
		 RIG_FRNG_END
	},
	.tx_range_list2 = { RIG_FRNG_END },	/* no TX ranges, this is a receiver */

	.tuning_steps = {
			 { PCR1000_MODES, Hz(1) },
			 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
	.filters = {
		    { RIG_MODE_FM | RIG_MODE_AM, kHz(15) },
		    { RIG_MODE_FM | RIG_MODE_AM, kHz(6) },
		    { RIG_MODE_CW | RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_AM,
		     kHz(2.8)},
		    { RIG_MODE_WFM, kHz(230) },
		    { RIG_MODE_WFM | RIG_MODE_FM | RIG_MODE_AM, kHz(50) },
		    RIG_FLT_END,
	},

	.priv = (void *) &pcr1000_priv,

	/* XXX fake */
	.str_cal = { 3, { { 0, -60 }, { 127, 0 }, { 255, 60 } } },

	.rig_init	= pcr_init,
	.rig_cleanup	= pcr_cleanup,
	.rig_open	= pcr_open,
	.rig_close	= pcr_close,

	.set_freq	= pcr_set_freq,
	.get_freq	= pcr_get_freq,
	.set_mode	= pcr_set_mode,
	.get_mode	= pcr_get_mode,

	.get_info	= pcr_get_info,

	.set_level	= pcr_set_level,
	.get_level	= pcr_get_level,

	.set_func	= pcr_set_func,
	.get_func	= pcr_get_func,

	.set_ctcss_sql	= pcr_set_ctcss_sql,
	.get_ctcss_sql	= pcr_get_ctcss_sql,

	.set_trn	= pcr_set_trn,
	.decode_event	= pcr_decode_event,

	.set_powerstat  = pcr_set_powerstat,
	.get_powerstat  = pcr_get_powerstat,
};