Hamlib/icom/ic821h.c

171 wiersze
5.2 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of IC-821H (VHF/UHF All-Mode Tranceiver)
* Contributed by Francois Retief <fgretief@sun.ac.za>
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "icom.h"
#define IC821H_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)
#define IC821H_VFO_ALL (RIG_VFO_A|RIG_VFO_C|RIG_VFO_MEM)
/* FIXME: What about MAIN/SUB mode? And satellite mode? */
#define IC821H_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_CPY|RIG_OP_MCL)
#define IC821H_SCAN_OPS (RIG_SCAN_MEM)
/* FIXME: Manual talks about 3 modes: Programmed scan, Memory scan and
* Mode select memory scan operation. How do i encode these?
*/
#define IC821H_STR_CAL { 0, { } }
/*
*/
static const struct icom_priv_caps ic821h_priv_caps = {
0x4c, /* default address */
1, /* 731 mode */
0, /* no XCHG */
ic737_ts_sc_list
};
const struct rig_caps ic821h_caps = {
.rig_model = RIG_MODEL_IC821H,
.model_name = "IC-821H",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, }, /* Attanuator 15dB for each band. manual button */
.max_rit = Hz(0), /* SSB,CW: +-1.0kHz FM: +-5.0kHz */
.max_xit = Hz(0),
.max_ifshift = Hz(0), /* 1.2kHz manual knob */
.targetable_vfo = 0,
.vfo_ops = IC821H_VFO_OPS,
.scan_ops = IC821H_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
/* FIXME: Each band has 80 channels (2*80) */
{ 1, 80, RIG_MTYPE_MEM },
{ 81, 82, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
{MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
{MHz(144),MHz(146),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
{MHz(144),MHz(146),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
{MHz(430),MHz(440),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
{MHz(430),MHz(440),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(136),MHz(174),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
{MHz(430),MHz(450),IC821H_MODES,-1,-1,IC821H_VFO_ALL},
RIG_FRNG_END, },
/*
* From manual: VHF UHF
* USA 144.0-148.0 MHz 430.0-450.0 MHz
* Europe 144.0-146.0 MHz 430.0-440.0 MHz
* Australia 144.0-148.0 MHz 430.0-450.0 MHz
* Sweden 144.0-146.0 MHz 432.0-438.0 MHz
*/
.tx_range_list2 = {
{MHz(144),MHz(148),RIG_MODE_SSB,W(6),W(35),IC821H_VFO_ALL},
{MHz(144),MHz(148),RIG_MODE_FM|RIG_MODE_CW,W(6),W(45),IC821H_VFO_ALL},
{MHz(430),MHz(450),RIG_MODE_SSB,W(6),W(30),IC821H_VFO_ALL},
{MHz(430),MHz(450),RIG_MODE_FM|RIG_MODE_CW,W(6),W(40),IC821H_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{RIG_MODE_SSB|RIG_MODE_CW,1},
{RIG_MODE_SSB|RIG_MODE_CW,10},
{RIG_MODE_SSB|RIG_MODE_CW,50},
{RIG_MODE_SSB|RIG_MODE_CW,100},
{RIG_MODE_FM,kHz(5)},
RIG_TS_END, },
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW|RIG_MODE_SSB, kHz(2.3)}, /* buildin */
{RIG_MODE_FM, kHz(15)}, /* buildin */
RIG_FLT_END, },
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic821h_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
};