Hamlib/kenwood/ts440.c

180 wiersze
5.5 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib Kenwood backend - TS440 description
* Copyright (c) 2000-2004 by Stephane Fillod
*
* $Id: ts440.c,v 1.13 2005-04-04 21:31:55 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#include "ic10.h"
#define TS440_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS440_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS440_AM_TX_MODES RIG_MODE_AM
#define TS440_FUNC_ALL RIG_FUNC_LOCK
#define TS440_LEVEL_ALL RIG_LEVEL_NONE
#define TS440_VFO (RIG_VFO_A|RIG_VFO_B)
#define TS440_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS440_SCAN_OPS (RIG_SCAN_VFO)
static const struct kenwood_priv_caps ts440_priv_caps = {
.cmdtrm = EOM_KEN,
.if_len = 29,
};
/*
* ts440 rig capabilities.
*
* TODO: scan, get/set_channel, RIT/XIT, Voice Recall, split
*
* part of infos comes from .http = //www.n7uic.net/radio/kenwood/ts440/specs.htm
* .http = //public.srce.hr/9A1CDD/mods/kenwood/knwdif.mod
* .http = //www.ifrance.fr/clucas/modposte/ts440/mod440.htm
*
*/
const struct rig_caps ts440_caps = {
.rig_model = RIG_MODEL_TS440,
.model_name = "TS-440",
.mfg_name = "Kenwood",
.version = BACKEND_VER "." IC10_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = TS440_FUNC_ALL,
.has_get_level = TS440_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TS440_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(9990),
.max_xit = Hz(9990),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.vfo_ops = TS440_VFO_OPS,
.scan_ops = TS440_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { { 0, 99, RIG_MTYPE_MEM, {IC10_CHANNEL_CAPS} },
RIG_CHAN_END, },
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100),MHz(30),TS440_ALL_MODES,-1,-1,TS440_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
{kHz(1800),MHz(2)-1,TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{kHz(1800),MHz(2)-1,TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{kHz(3500),MHz(4)-1,TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{kHz(3500),MHz(4)-1,TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{MHz(7),kHz(7300),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{MHz(7),kHz(7300),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{kHz(10100),kHz(10150),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{kHz(10100),kHz(10150),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{MHz(14),kHz(14350),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{MHz(14),kHz(14350),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{kHz(18068),kHz(18168),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{kHz(18068),kHz(18168),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{MHz(21),kHz(21450),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{MHz(21),kHz(21450),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{kHz(24890),kHz(24990),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{kHz(24890),kHz(24990),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
{MHz(28),kHz(29700),TS440_OTHER_TX_MODES,5000,W(200),TS440_VFO},
{MHz(28),kHz(29700),TS440_AM_TX_MODES,2000,W(110),TS440_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{TS440_ALL_MODES,10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.2)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *)&ts440_priv_caps,
.set_freq = kenwood_set_freq,
.get_freq = ic10_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = ic10_get_mode,
.set_vfo = ic10_set_vfo,
.get_vfo = ic10_get_vfo,
.set_split_vfo = ic10_set_split_vfo,
.get_split_vfo = ic10_get_split_vfo,
.set_ptt = kenwood_set_ptt,
.get_ptt = ic10_get_ptt,
.set_func = kenwood_set_func,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = ic10_get_mem,
.set_trn = kenwood_set_trn,
.scan = kenwood_scan,
.set_channel = ic10_set_channel,
.get_channel = ic10_get_channel,
.decode_event = ic10_decode_event,
};
/*
* Function definitions below
*/