Hamlib/kenwood/flex6xxx.c

/*
 *  Hamlib FlexRadio backend - 6K series rigs
 *  Copyright (c) 2002-2009 by Stephane Fillod
 *  Copyright (C) 2010,2011,2012,2013 by Nate Bargmann, n0nb@arrl.net
 *  Copyright (C) 2013 by Steve Conklin AI4QR, steve@conklinhouse.com
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 *  See the file 'COPYING.LIB' in the main Hamlib distribution directory for
 *  the complete text of the GNU Lesser Public License version 2.1.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "kenwood.h"
#include "bandplan.h"
#include "flex.h"
#include "token.h"
#include "cal.h"

#define F6K_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB)

#define F6K_FUNC_ALL (RIG_FUNC_VOX)

#define F6K_LEVEL_ALL (RIG_LEVEL_SLOPE_HIGH|RIG_LEVEL_SLOPE_LOW|RIG_LEVEL_KEYSPD)

#define F6K_VFO (RIG_VFO_A|RIG_VFO_B)
#define F6K_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)

#define F6K_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)


static rmode_t flex_mode_table[KENWOOD_MODE_TABLE_MAX] = {
	[0] = RIG_MODE_NONE,
	[1] = RIG_MODE_LSB,
	[2] = RIG_MODE_USB,
	[3] = RIG_MODE_CW,
	[4] = RIG_MODE_FM,
	[5] = RIG_MODE_AM,
	[6] = RIG_MODE_PKTLSB,
	[7] = RIG_MODE_NONE,
	[8] = RIG_MODE_NONE,
	[9] = RIG_MODE_PKTUSB
};

static struct kenwood_priv_caps f6k_priv_caps  = {
	.cmdtrm =  EOM_KEN,
	.mode_table = flex_mode_table,
};

#define DSP_BW_NUM 8

static int dsp_bw_ssb[DSP_BW_NUM] = {
  4000, 3300, 2900, 2700, 2400, 2100, 1800, 1600
};

static int dsp_bw_am[DSP_BW_NUM] = {
  20000, 16000, 14000, 12000, 10000, 8000, 6000, 5600
};

static int dsp_bw_cw[DSP_BW_NUM] = {
  3000, 1500, 1000, 800, 400, 250, 100, 50
};

static int dsp_bw_dig[DSP_BW_NUM] = {
  3000, 2000, 1500, 1000, 600, 300, 150, 100
};

/* Private helper functions */

static int flex6k_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
  rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);

  if (!rig || !mode || !width)
    return -RIG_EINVAL;

  struct kenwood_priv_caps *caps = kenwood_caps(rig);

  char modebuf[10];
  int index;
  int retval;

  retval = kenwood_safe_transaction(rig, "MD", modebuf, 6, 3);
  if (retval != RIG_OK)
    return retval;

  *mode = kenwood2rmode(modebuf[2] - '0', caps->mode_table);

  if ((vfo == RIG_VFO_VFO) || (vfo == RIG_VFO_CURR)) {
    vfo = rig->state.current_vfo;
    rig_debug(RIG_DEBUG_VERBOSE, "%s: setting VFO to current\n", __func__);
  }

  /*
   * The Flex CAT interface does not support FW for reading filter width,
   * so use the ZZFI or ZZFJ command
   */
  switch (vfo) {
  case RIG_VFO_A:
    retval = kenwood_safe_transaction(rig, "ZZFI", modebuf, 10, 6);
    break;
  case RIG_VFO_B:
    retval = kenwood_safe_transaction(rig, "ZZFJ", modebuf, 10, 6);
    break;
  default:
    rig_debug(RIG_DEBUG_ERR, "%s: unsupported VFO %d\n", __func__, vfo);
    return -RIG_EINVAL;
  }

  if (retval != RIG_OK)
    return retval;

  index = atoi(&modebuf[4]);
  if (index >= DSP_BW_NUM) {
    rig_debug(RIG_DEBUG_ERR,
	      "flex6k_get_mode: unexpected ZZF[IJ] answer, index=%d\n", index);
    return -RIG_ERJCTED;
  }

  switch (*mode) {
  case RIG_MODE_AM:
    *width = dsp_bw_am[index];
    break;
  case RIG_MODE_CW:
    *width = dsp_bw_cw[index];
    break;
  case RIG_MODE_USB:
  case RIG_MODE_LSB:
    *width = dsp_bw_ssb[index];
    break;
    //case RIG_MODE_FM:
    //*width = 3000; /* not supported yet, needs followup */
    //break;
  case RIG_MODE_PKTLSB:
  case RIG_MODE_PKTUSB:
    *width = dsp_bw_dig[index];
    break;
  default:
    rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode %d, setting default BW\n", __func__, *mode);
    *width = 3000;
    break;
  }
  return RIG_OK;
}

static int flex6k_find_width(rmode_t mode, pbwidth_t width, int *ridx)
{
  int *w_a; // Width array, these are all ordered in descending order!
  int idx = 0;

  rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);

  switch (mode) {
  case RIG_MODE_AM:
    w_a = dsp_bw_am;
    break;
  case RIG_MODE_CW:
    w_a = dsp_bw_cw;
    break;
  case RIG_MODE_USB:
  case RIG_MODE_LSB:
    w_a = dsp_bw_ssb;
    break;
    //case RIG_MODE_FM:
    //*width = 3000; /* not supported yet, needs followup */
    //break;
  case RIG_MODE_PKTLSB:
  case RIG_MODE_PKTUSB:
    w_a = dsp_bw_dig;
    break;
  default:
    rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode %d\n", __func__, mode);
    return -RIG_EINVAL;
  }

  // return the first smaller or equal possibility
  while((idx < DSP_BW_NUM) && (w_a[idx] > width))
    idx++;
  if (idx >= DSP_BW_NUM) {
    idx = DSP_BW_NUM - 1;
  }

  *ridx = idx;
  return RIG_OK;
}

static int flex6k_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
  rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);

  if (!rig)
    return -RIG_EINVAL;

  struct kenwood_priv_caps *caps = kenwood_caps(rig);
  char buf[10];
  char kmode;
  int idx;
  int err;

  kmode = rmode2kenwood(mode, caps->mode_table);
  if (kmode < 0 ) {
    rig_debug(RIG_DEBUG_WARN, "%s: unsupported mode '%s'\n",
	      __func__, rig_strrmode(mode));
    return -RIG_EINVAL;
  }

  sprintf(buf, "MD%c", '0' + kmode);
  err = kenwood_transaction(rig, buf, NULL, 0);
  if (err != RIG_OK)
    return err;

  err = flex6k_find_width(mode, width, &idx);
  if (err != RIG_OK)
    return err;

  if ((vfo == RIG_VFO_VFO) || (vfo == RIG_VFO_CURR)) {
    vfo = rig->state.current_vfo;
    rig_debug(RIG_DEBUG_VERBOSE, "%s: setting VFO to current\n", __func__);
  }
  /*
   * The Flex CAT interface does not support FW for reading filter width,
   * so use the ZZFI or ZZFJ command
   */
  switch (vfo) {
  case RIG_VFO_A:
    sprintf(buf, "ZZFI%02d;", idx);
    break;
  case RIG_VFO_B:
    sprintf(buf, "ZZFJ%02d;", idx);
    break;
  default:
    rig_debug(RIG_DEBUG_ERR, "%s: unsupported VFO %d\n", __func__, vfo);
    return -RIG_EINVAL;
  }

  err = kenwood_transaction(rig, buf, NULL, 0);
  if (err != RIG_OK)
    return err;
  return RIG_OK;
}

/*
 * F6K rig capabilities.
 */
const struct rig_caps f6k_caps = {
	.rig_model =		RIG_MODEL_F6K,
	.model_name =		"6xxx",
	.mfg_name =		"FlexRadio",
	.version =		"20130717",
	.copyright =		"LGPL",
	.status =		RIG_STATUS_BETA,
	.rig_type =		RIG_TYPE_TRANSCEIVER,
	.ptt_type =		RIG_PTT_RIG,
	.dcd_type =		RIG_DCD_NONE,
	.port_type =		RIG_PORT_NETWORK,
	// -spc- TODO set this reasonably, don't know what the flex should be
	.timeout =		600,	/* FA and FB make take up to 500 ms on band change */
	.retry =		3,

	.has_get_func =		RIG_FUNC_NONE, /* has VOX but not implemented here */
	.has_set_func =		RIG_FUNC_NONE,
	.has_get_level =	F6K_LEVEL_ALL,
	.has_set_level =	F6K_LEVEL_ALL,
	.has_get_parm =		RIG_PARM_NONE,
	.has_set_parm =		RIG_PARM_NONE,	/* FIXME: parms */
	.level_gran =		{},		/* FIXME: granularity */
	.parm_gran =		{},
	//.extlevels = 		elecraft_ext_levels,
	//.extparms =		kenwood_cfg_params,
	.preamp =		{ RIG_DBLST_END, },
	.attenuator =		{ RIG_DBLST_END, },
	.max_rit =		Hz(0),
	.max_xit =		Hz(0),
	.max_ifshift =		Hz(0),
	.vfo_ops =		RIG_OP_NONE,
	.targetable_vfo =	RIG_TARGETABLE_FREQ|RIG_TARGETABLE_MODE,
	.transceive =		RIG_TRN_RIG,
	.bank_qty =		0,
	.chan_desc_sz =		0,

	.chan_list =		{ RIG_CHAN_END },

	.rx_range_list1 =  {
		{kHz(30), MHz(77), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
		{MHz(135), MHz(165), F6K_MODES, -1,- 1, F6K_VFO, F6K_ANTS},
		RIG_FRNG_END,
	  }, /* rx range */
	.tx_range_list1 =  {
		FRQ_RNG_HF(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
		FRQ_RNG_6m(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
		FRQ_RNG_2m(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
		RIG_FRNG_END,
	  }, /* tx range */

	.rx_range_list2 =  {
		{kHz(30), MHz(77), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
		{ MHz(135), MHz(165), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
		RIG_FRNG_END,
	  }, /* rx range */
	.tx_range_list2 =  {
		FRQ_RNG_HF(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
		FRQ_RNG_6m(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
		FRQ_RNG_2m(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
		RIG_FRNG_END,
	  }, /* tx range */

	.tuning_steps =  {
		 {F6K_MODES, 1},
		 RIG_TS_END,
		},

	/* mode/filter list, remember: order matters! */
	.filters =  {
		{RIG_MODE_SSB, kHz(2.7)},
		{RIG_MODE_SSB, kHz(3.3)},
		{RIG_MODE_SSB, kHz(1.8)},
		{RIG_MODE_SSB, kHz(1.6)},
		{RIG_MODE_SSB, kHz(4.0)},
		{RIG_MODE_SSB, RIG_FLT_ANY},
		{RIG_MODE_CW, kHz(0.4)},
		{RIG_MODE_CW, kHz(1.5)},
		{RIG_MODE_CW, Hz(50)},
		{RIG_MODE_CW, kHz(3.0)},
		{RIG_MODE_CW, RIG_FLT_ANY},
		{RIG_MODE_PKTUSB|RIG_MODE_PKTLSB, kHz(1.5)},
		{RIG_MODE_PKTUSB|RIG_MODE_PKTLSB, kHz(3.0)},
		{RIG_MODE_PKTUSB|RIG_MODE_PKTLSB, kHz(0.1)},
		{RIG_MODE_PKTUSB|RIG_MODE_PKTLSB, RIG_FLT_ANY},
		{RIG_MODE_AM, kHz(6)},
		{RIG_MODE_AM, kHz(14)},
		{RIG_MODE_AM, kHz(5.6)},
		{RIG_MODE_AM, kHz(20.0)},
		{RIG_MODE_AM, RIG_FLT_ANY},
		{RIG_MODE_FM, kHz(13)}, /* TBC */
		RIG_FLT_END,
	},
	.priv =  (void *)&f6k_priv_caps,

	.rig_init =		kenwood_init,
	.rig_cleanup =		kenwood_cleanup,
	.rig_open =		flexradio_open,
	.set_freq =		kenwood_set_freq,
	.get_freq =		kenwood_get_freq,
	.set_mode =		flex6k_set_mode,
	.get_mode =		flex6k_get_mode,
	.set_vfo =		kenwood_set_vfo,
	.get_vfo =		kenwood_get_vfo_if,
	.set_split_vfo =	kenwood_set_split_vfo,
	.get_split_vfo =	kenwood_get_split_vfo_if,
	.get_ptt =		kenwood_get_ptt,
	.set_ptt =		kenwood_set_ptt,
	// TODO copy over kenwood_[set|get]_level and modify to handle DSP filter values
	// correctly - use actual values instead of indices
	.set_level =		kenwood_set_level,
	.get_level =		kenwood_get_level,
	 //.set_ant =		kenwood_set_ant_no_ack,
	 //.get_ant =		kenwood_get_ant,
};