Hamlib/kenwood/thf7.c

310 wiersze
7.9 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib Kenwood backend - TH-F7 description
* Copyright (c) 2001-2009 by Stephane Fillod
*
* $Id: thf7.c,v 1.17 2009-02-03 23:22:58 azummo Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h>
#include <hamlib/rig.h>
#include "tones.h"
#include "kenwood.h"
#include "th.h"
#define THF7_MODES_TX (RIG_MODE_FM)
#define THF7_HIGH_MODES (RIG_MODE_FM|RIG_MODE_AM|RIG_MODE_WFM)
#define THF7_ALL_MODES (THF7_HIGH_MODES|RIG_MODE_SSB|RIG_MODE_CW)
#define THF7_FUNC_ALL (RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_TBURST| \
RIG_FUNC_ARO|RIG_FUNC_LOCK|RIG_FUNC_BC)
/*
* How increadible, there's no RIG_LEVEL_STRENGTH!
*/
#define THF7_LEVEL_ALL (RIG_LEVEL_SQL|RIG_LEVEL_RFPOWER|RIG_LEVEL_ATT|RIG_LEVEL_BALANCE)
#define THF7_PARMS (RIG_PARM_APO|RIG_PARM_BEEP|RIG_PARM_BACKLIGHT|RIG_PARM_KEYLIGHT)
#define THF7_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
#define THF7_ANTS (RIG_ANT_1|RIG_ANT_2)
/*
* TODO: * scan_group can only be get. scan_group=channel_num%50;
*/
#define THF7_CHANNEL_CAPS \
TH_CHANNEL_CAPS,\
.flags=1, \
.dcs_code=1, \
.dcs_sql=1,
#define THF7_CHANNEL_CAPS_WO_LO \
TH_CHANNEL_CAPS,\
.dcs_code=1, \
.dcs_sql=1,
/* CTCSS 01..42 */
static const tone_t thf7_ctcss_list[] = {
670, 693, 719, 744, 770, 797, 825, 854, 885, 915,
948, 974, 1000, 1035, 1072, 1109, 1148, 1188, 1230, 1273,
1318, 1365, 1413, 1462, 1514, 1567, 1622, 1679, 1738, 1799,
1862, 1928, 2035, 2065, 2107, 2181, 2257, 2291, 2336, 2418,
2503, 2541,
0
};
static rmode_t thf7_mode_table[KENWOOD_MODE_TABLE_MAX] = {
[0] = RIG_MODE_FM,
[1] = RIG_MODE_WFM,
[2] = RIG_MODE_AM,
[3] = RIG_MODE_LSB,
[4] = RIG_MODE_USB,
[5] = RIG_MODE_CW
};
/*
* Band A & B
*/
#define THF7_VFO (RIG_VFO_A|RIG_VFO_B)
static struct kenwood_priv_caps thf7_priv_caps = {
.cmdtrm = EOM_TH, /* Command termination character */
.mode_table = thf7_mode_table,
};
static int thf7e_init(RIG *rig);
static int thf7e_open(RIG *rig);
static int thf7_get_vfo (RIG *rig, vfo_t *vfo);
/*
* TH-F7E rig capabilities.
*
* Manual: http://www.k6may.com/KenwoodTHF6Tip1.shtml
*/
const struct rig_caps thf7e_caps = {
.rig_model = RIG_MODEL_THF7E,
.model_name = "TH-F7E",
.mfg_name = "Kenwood",
.version = TH_VER,
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_HANDHELD,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 500,
.retry = 3,
.has_get_func = THF7_FUNC_ALL,
.has_set_func = THF7_FUNC_ALL,
.has_get_level = THF7_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(THF7_LEVEL_ALL),
.has_get_parm = THF7_PARMS,
.has_set_parm = THF7_PARMS,
.level_gran = {
[LVL_SQL] = { .min = { .i = 0 }, .max = { .i = 5 } },
[LVL_RFPOWER] = { .min = { .i = 2 }, .max = { .i = 0 } },
},
.parm_gran = {},
.ctcss_list = thf7_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.vfo_ops = THF7_VFO_OP,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG, /* TBC */
.bank_qty = 0,
.chan_desc_sz = 8,
.chan_list = {
{ 0, 399, RIG_MTYPE_MEM , {THF7_CHANNEL_CAPS}}, /* normal MEM */
{ 400,409, RIG_MTYPE_EDGE, {THF7_CHANNEL_CAPS}}, /* L0-L9 lower scan limit */
{ 410,419, RIG_MTYPE_EDGE, {THF7_CHANNEL_CAPS}}, /* U0-U9 upper scan limit */
{ 420,429, RIG_MTYPE_MEM, {THF7_CHANNEL_CAPS}}, /* I0-I9 info */
{ 430,431, RIG_MTYPE_PRIO, {THF7_CHANNEL_CAPS}}, /* PR0,PR1 priority */
{ 432,434, RIG_MTYPE_CALL, {THF7_CHANNEL_CAPS_WO_LO}}, /* Call (for each ham band) */
{ 435,449, RIG_MTYPE_BAND, {THF7_CHANNEL_CAPS_WO_LO}}, /* VFO */
/* 3 A-band VFO */
/* 11 B-band VFO */
/* TODO: 10 DTMF */
RIG_CHAN_END,
},
.rx_range_list1 = {
/* RIG_ANT_2 is internal bar antenna */
{MHz(144),MHz(146),THF7_MODES_TX,-1,-1,RIG_VFO_A,RIG_ANT_1},
{kHz(430),MHz(440),THF7_MODES_TX,-1,-1,RIG_VFO_A,RIG_ANT_1},
{kHz(100),MHz(470),THF7_ALL_MODES,-1,-1,RIG_VFO_B, RIG_ANT_1|RIG_ANT_2},
{MHz(470),GHz(1.3),THF7_HIGH_MODES,-1,-1,RIG_VFO_B,RIG_ANT_1},
RIG_FRNG_END
},
.tx_range_list1 = {
/* power actually depends on DC power supply */
{MHz(144),MHz(146),THF7_MODES_TX,W(0.05),W(5),RIG_VFO_A,RIG_ANT_1},
{MHz(430),MHz(440),THF7_MODES_TX,W(0.05),W(5),RIG_VFO_A,RIG_ANT_1},
RIG_FRNG_END
},
/* region 2 is TH-F6A */
.rx_range_list2 = { RIG_FRNG_END, },
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
/* This table is ordered according to protocol, from '0' to 'b' */
/* The steps are not available on every band/frequency limit 470MHz */
{THF7_ALL_MODES,kHz(5)},
{THF7_ALL_MODES,kHz(6.25)},
{THF7_ALL_MODES,kHz(8.33)},
{THF7_ALL_MODES,kHz(9)},
{THF7_ALL_MODES,kHz(10)},
{THF7_ALL_MODES,kHz(12.5)},
{THF7_ALL_MODES,kHz(15)},
{THF7_ALL_MODES,kHz(20)},
{THF7_ALL_MODES,kHz(25)},
{THF7_ALL_MODES,kHz(30)},
{THF7_ALL_MODES,kHz(50)},
{THF7_ALL_MODES,kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
/* real width to be checked (missing specs) */
{RIG_MODE_FM, kHz(12)},
{RIG_MODE_FM, kHz(6)}, /* narrow FM */
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_WFM, kHz(150)}, /* or 230? */
{RIG_MODE_SSB|RIG_MODE_CW, kHz(3)},
RIG_FLT_END,
},
.priv = (void *)&thf7_priv_caps,
.rig_init = thf7e_init,
.rig_cleanup = kenwood_cleanup,
.rig_open = thf7e_open,
.set_freq = th_set_freq,
.get_freq = th_get_freq,
.set_mode = th_set_mode,
.get_mode = th_get_mode,
.set_vfo = th_set_vfo,
.get_vfo = thf7_get_vfo,
.set_ctcss_tone = th_set_ctcss_tone,
.get_ctcss_tone = th_get_ctcss_tone,
.set_ptt = th_set_ptt,
.get_dcd = th_get_dcd,
.vfo_op = kenwood_vfo_op,
.set_mem = th_set_mem,
.get_mem = th_get_mem,
.set_trn = th_set_trn, /* TBC */
.get_trn = th_get_trn, /* TBC */
.decode_event = th_decode_event, /* TBC */
.set_func = th_set_func,
.get_func = th_get_func,
.set_level = th_set_level,
.get_level = th_get_level,
.get_parm = th_get_parm,
.set_parm = th_set_parm,
.get_info = th_get_info,
.set_channel = th_set_channel,
.get_channel = th_get_channel,
.set_ant = th_set_ant,
.get_ant = th_get_ant,
.reset = th_reset,
};
int thf7e_init(RIG *rig)
{
rig->state.itu_region = RIG_ITU_REGION1;
Several Kenwood patches from Alessandro Zummo, azummo-lists@towertech.it Among the changes: I finally had the time to build the CAT interface for my TS450 and discovered a couple of new commands. MX; MX0; MX1; is used to activate the AIP function FL; FLXXXYYY; is used to set the filters. I made a perl script to try every possible two-letters command. If amyone is interested, at their own risk, just ask. I've then modified and optimized the kenwood driver: - moved MD_ defined to .h - added init/cleanup - ts450_get_mode -> kenwood_get_mode_if - support reading memory channel freq within kenwood_get_freq - added kenwood_safe_transaction as an helper with result len check - added kenwood_get_if - added get_level for RIG_LEVEL_CWPITCH - set/get for RIG_FUNC_AIP - replaced ts140/680 get_mode and get_freq - removed the delay on the ts450. it works just fine without it. ============================= the attached patch requires the first one I sent and addresses a few remaining issues - converted 8 spaces to tabs - added kenwood_mode_table - added kenwood_simple_transaction helper func - use kenwood2rmode and rmode2kenwood where possible - some code cleanup - use kenwood_safe/simple_transaction where possible - added kenwood_get_mem_if (ts140,ts450,ts680,ts690,ts850) - added kenwood_get_channel (ts450,ts850) - added FUNC_FINE_STEP (commented out, we have no more func slots) - added LEVEL_CWPITCH (set) - no reason to have ts850_set_func, ts850_set_level - ... ts480_get/set_ant, ts480_set_func - ... ts570_set/get_ant, ts570_get_channel, ts570_get_rit - ... ts680_set_func - ... ts790_get_mode, ts790_get_vfo this patch is a bit more extensive and tested only on the TS450. feedback will be appreciated. where I removed code I took care to verify that the generic code in kenwood.c worked in the same way. git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2591 7ae35d74-ebe9-4afe-98af-79ac388436b8
2009-01-23 03:24:42 +00:00
return kenwood_init(rig);
}
int thf7e_open(RIG *rig)
{
/* TH-F7E is Region 1 only.
* Region 2 is supported by TH-F6A
*/
if (rig->state.itu_region != RIG_ITU_REGION1)
return -RIG_ECONF;
return kenwood_open(rig);
}
/*
* th_get_vfo
* Assumes rig!=NULL
*/
int
thf7_get_vfo(RIG *rig, vfo_t *vfo)
{
char vfoch;
int retval;
rig_debug(RIG_DEBUG_TRACE, "%s: called\n", __func__);
retval = th_get_vfo_char(rig, vfo, &vfoch);
if (retval != RIG_OK)
return retval;
switch (vfoch) {
case '0' :
case '3' : /* Fine Step Enable */
break;
case '1' : /* MR */
case '2' : /* CALL */
case '4' : /* INFO */
*vfo = RIG_VFO_MEM;
break;
default:
rig_debug(RIG_DEBUG_ERR, "%s: Unexpected VFO value '%c'\n", __func__, vfoch);
return -RIG_EVFO;
}
return RIG_OK;
}